Vehicle transport - Import export

The storage and retrieval vehicle is used for storing ULDs in racking. Equipped with a lift, the Elevating Transfer Vehicle transports ULDs vertically and horizontally at the same time. It is guided by rails which also supply the power needed. Flow plane: Horizontal and vertical Flow direction: Unidirectional Functions: Transporting, storing and retrieving ULDs Operating modes: Fully automated, semi-automated, maintenance Benefits: Three-dimensional handling Space-saving Minimal adjustments to make onsite A safe way to transport ULDs with care IATA-compliant transportation of ULDs

The transfer vehicle is used for transporting cargo horizontally on a single level. The individual loading units are moved on and off the racking by interconnecting the integrated roller conveyor with external roller decks. As well as transporting ULDs which take up the entire surface of the roller deck, it is possible to transfer two containers simultaneously. Flow plane: Horizontal Flow direction: Unidirectional Functions: Transporting, storing and retrieving ULDs Operating modes: Fully automated, semi-automated, maintenance Benefits: A safe way to transport ULDs with care IATA-compliant transportation of ULDs

Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors

Palletless automated car parking system CUBILE Palletless technology The palletless fully automated car parking system CUBILE is a perfect solution for creating from 50 to over 1000 parking spaces. As no pallets are used for transporting cars, the system is very fast and efficient. Drivers park their car at ground level in one of the entrance cabins and receive a parking ticket. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The cabin’s rolling gate closes and the car is transported below ground in a lift before it is collected by one of horizontal transfer vehicles and brought to a free parking space. In the palletless parking system CUBILE, the Lödige Shifter does the heavy lifting. This is an ultra-flat robot that drives underneath the car and lifts it up at the wheels to take it from the lift to the transfer vehicle and transport it to the parking space.

Novelis continues to accelerate the development of its innovative aluminum transportation materials to expand global product offerings for more sustainable buses, trucks, trailers, trains and other forms of commercial transport. Aluminum-intensive vehicles are not only up to 40 percent lighter than those made with steel, they are also safer and more durable. Given their unique properties, aluminum transportation materials continue to emerge as the material of choice for the industry. Manufacturers rely on aluminum’s many benefits, including diverse application development for electric vehicles and emerging mobility demands, superior energy absorption for crash management products and safety, and greater design flexibility due to strength, joining and formability properties, enabling better driving dynamics and vehicle agility.

Safe and as fast as possible – those are the crucial prerequisites that modern tool changers need to satisfy. HUBTEX tool changers with load capacities of up to 65 tonnes help to reduce the changing times for pressing and stamping tools and so improve production efficiency. The compact running gear also allows for extremely low entrance heights underneath machinery. Load capacities up to 65,0 t Tool platform with lift hights up to 3000 mm

The Platform Truck SFB is a freely manoeuvrable, self-propelled electric vehicle for the in-plant transport of all sorts of heavy loads such as: metal sheets, steel girders, coils, machine parts, cast iron and tools. Due to its modular design, this self-propelled vehicle can be customized to suit various customer-specific requirements. load capacities up to 63t can be used as an all-purpose vehicle indoor and outdoor application cable remote control battery powered electric drive (80V) maintenance-free AC drive technology robust design single-axle, all-wheel and multidirectional steering Options: proportional steering radio remote control cabin or driver's station solid rubber tires for driving over asphalt lighting / LED side lighting loading platform according to customer specification safety devices according to customer specification automatization to a driverless transport system, with partners hydraulic lifting device further options available upon request

The rail-mounted trucks made by HUBTEX are tailor-made to suit individual customer wishes and requirements. Well-proven standard components are used in the driving mechanisms and the control technology. The rail-mounted truck is exclusively designed for in-plant transport. load capacities up to 150t load and/or towing vehicle indoor and outdoor application battery-powered, electric powered or without driving mechanism rugged running wheels cable remote control maintenance-free AC drive technology robust design individual frame design, depending on the transport task Options: radio remote control cabin or driver's station lighting / LED side lighting loading platform according to customer specification safety devices according to customer specification driverless transport system hydraulic lifting device further options available upon request

HUBTEX driver seated electric tow tractor with hydraulic gooseneck. Three-wheel running gear with solid rubber tyres in compact design. For fast and reliable handling (towing and pushing) of cargo trailers upto 50 tonnes. AC driving motor battery powered electric drive (80V) indoor and outdoor application full rubber tyre equipment system loads between 32 and 50t hydraulic gooseneck ergonomic arrangement of the operational controls driver seat position crosswise to the direction of motion

The Multicar 27compact combines the efficiency and flexibility of a multifunctional implement carrier and transporter with the comfort and reliability of a commercial vehicle. This Multicar can transport payloads of over 1 t. Or you can use the vehicle as a flexible implement carrier with upgrade options for a wide range of both electrical and hydraulic applications in all seasons. 

The large maturing store is for storing and maturing the boards. The fully automated system with aisle vehicle and accompanying satellites is responsible for the stack transport. The aisle vehicle moves the stack in one direction and the satellites assume the task of transporting them into the rack aisles. The size depends on the required storage capacity and on local circumstances. The aisle vehicles are responsible for transfer movements, the satellites pick the stacks up or move them into the individual aisles. Advantages Expandable by modules Options ‘First in - rst out’ strategy ‘First in – last out’ strategy

Properties: ALDOVET KOK is a special surface disinfectant to control the permanent and developing forms of endoparasites, nematode eggs (ascarids), oocysts, and Coocidia. At the same time, ALDOVET KOK has a strong bactericidal, virucidal and yeasticidal effect. It is recommended for use in animal houses, for livestock equipment and in animal transport vehicles. Application: Only apply on acid-resistant surfaces. Before disinfection, all surfaces must be cleaned thoroughly with suitable cleaning agents for animal houses (e.g. ALDOVET TENS). After the surfaces are cleaned and dried the proper use-solution of ALDOVET KOK is applied with the usual application equipment. Surfaces with animal contact must properly be rinsed with water after disinfection.

DAMBACH storage and retrieval machines (SRMs) and materials handling control systems form the basis for greater efficiency in the warehouse. Control systems decide how economically and reliably warehouse systems work. DAMBACH therefore combines expertise and experience with knowledge of this branch of industry and the latest technology. The result is a wide range of solutions covering all the requirements of high bay and small-parts warehouses and the apron. From simple, low-cost controls for storage and retrieval machines or conveyor systems to standard applications for fully automatic SRM operations – and with energy recovery if required. The CARRIER and the COMPACT SHUTTLE of the MULTIFLEX pallet shuttle system as well as the RAIL CART of the Inductive Rail System MONOFLEX are equipped with decentralized controls. This minimizes sources of error and shortens installation times. The transport vehicles monitor and regulate the motion sequences on their own.

Properties: ALDOVET SAN is a special surface disinfectant concentrate on an excellent bactericidal, fungicidal, and virucidal effect. ALDOVET SAN is very well suited for the disinfection of surfaces and equipment in livestock barns, as well as for working surfaces, sanitary facilities, and animal transport vehicles. Application: Only apply on acid-resistant surfaces. Before disinfection, all surfaces must be cleaned thoroughly with suitable cleaning agents for animal houses (e.g. ALDOVET TENS). After the surfaces are cleaned and dried the proper use-solution of ALDOVET SAN is applied with the usual application equipment. Surfaces with animal contact must properly be rinsed with water after disinfection.

Properties: ALDOVET SUPER PLUS is a surface disinfectant with an excellent bactericidal, fungicidal, and virucidal effect for use in livestock barns, for barn equipment, as well as for animal transport vehicles. Application: Only apply on acid-resistant surfaces. Before disinfection, all surfaces must be cleaned thoroughly with suitable cleaning agents for animal houses. After the surfaces are cleaned and dried the proper use-solution of ALDOVET SUPER PLUS is applied with the usual application equipment. Surfaces with animal contact must properly be rinsed with water after disinfection.

The FOECK Truck FWF 50 is an agile cable winch vehicle based on the Mercedes Atego with 299 hp with all-wheel drive, wide wheels and 4-wheel steering. The low center of gravity and ideal weight distribution guarantee good off-road capability as well. This makes the FOECKF FWF50 the ideal towing and transport vehicle in this performance class, in rough terrain as well as on public roads at up to 85 km / h. The patented winch construction Schwenkmatic pulls the rope with a constant force of up to 50 tons.

The FOECK Truck is a flexible cable winch vehicle based on the MAN TGS with 480 hp all-wheel drive, large wheels and large ground clearance. The low centre of gravity and ideal 50:50 weight distribution during working operation due to the front attachment ensure excellent cross-country mobility. This makes the FOECK Truck a proven winch and transport vehicle on difficult terrain and on public roads at up to 85 km/h. The patented Schwenkmatic winch construction pulls the cable with a constant force of up to 80 tonnes.

The manual magnet transporter HL-series are ideal wherever conventional load lifting magnets are not used due to the low material thickness. They can be used to transport sheets vertically or horizontally directly from the sheet shelf directly to the workplace or on a transportation vehicle. They are used for the secure transportation of sharp steel sheets in sheet storage, burn cutting operations and stamping. All technical data can be found in the .pdf file.