Tube plates - Import export

zinc diecasting, nickel plated*for tubes up to 30 mm Ø*with wheel made from*hard metal

Base plate made of metal, black powder-coated, chrome-plated stand tube - ectendable from 320 - 620 mm - with poster frame and T-piece made of sturdy plastic.

Our pallet stand "UP" is used wherever palletised goods are offered at the POS and a labelling or marking of the products is required. For example, in the DIY or beverage market or wholesale. The powder-coated base plate has a size of 250 x 300 mm. It can easily be slid under the side of the pallet. In this way it has a firm stand. The tube fixed to the plate has a length of 1700 mm. Various accessories such as clamps and frames can be attached to it as required. These can be found under accessories. Clamps and frames are not included in the delivery.

SPIROL offers Spacers specifically designed for use in conveyor systems and garage door hinge assemblies. Both SPIROL's Conveyor Spacers and Garage Door Spacers are manufactured from galvanised steel to provide the necessary strength and corrosion protection at a fraction of the cost of plated cutoff tubing and machined bushings. SPIROL stocks the raw material and tooling required to manufacture the standard sizes of Conveyor Spacers and Garage Door Spacers. Intermediate lengths can be produced without additional tooling.

The OPTIBAR DP 7060 is a differential pressure transmitter with integrated absolute pressure measurement. It offers a high degree of modularity for various flow, hydrostatic level or process pressure applications. For DP flow measurements it can be perfectly combined with the KROHNE primary elements (e.g. orifice plates or pitot tubes). Featuring a quick response time of just 125 ms, the DP transmitter offers high accuracy and measurement stability under all process conditions. KROHNE is the only manufacturer of process instrumentation to carry out a total 3D linearization of its differential pressure transmitter. For a robust and accurate differential pressure measurement, even under changing process conditions, each OPTIBAR DP 7060 differential pressure transmitter is linearized in all three dimensions during calibration: differential pressure, ambient temperature and static pressure are taken into account in combination.

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

Combination of air breather and water removal filter Features ▪ Available in 4 different sizes ▪ Diameter of Ø100 mm / Ø3.94 in or Ø130 mm / Ø5.12 in ▪ Refillable with drying agent (non-toxic ZR gel grain) or a mix of drying agent and active carbon ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Replaceable air filter element SGB ▪ Connection: Male BSP thread (ISO 228) on Stainless Steel tube ▪ Available with adaptor plate to simplify installation and to enable the use of a visual contamination indicator ▪ Adaptor plate ▪ Visual contamination indicator ▪ Drying agent refilling material ▪ Active carbon refilling material ▪ Replacement air filter element

Particularly robust stainless steel anchorage point with a screw-on supporting tube (Ø 42 mm), base plate (200 x 200 mm) and counter plate (100 x 100 mm). This anchor can be installed in a ceiling, on a facade, on a hollow profile or in lightweight concrete to secure 3 individuals. It can also be implemented as a trouble-free end support in a lifeline system. EN 795:2012, A + CEN/TS 16415:2013 Suitable for installation in a ceiling, on a hollow profile or in lightweight concrete Incl. stainless steel installation set Optional: Installation aid ABS-Lock X-DURCH Sleeve

Bariatric couch Model no. 211.1330.0 800 mm wide, chromium-plated rectangular steel tube frame, collapsible feet, with transverse and longitudinal bracing, 2-section mattress, 70 mm thick foam rubber upholstery, levelling feet, head section adjustable up to +40°. Safe working load: 300 kg. Accessories: Paper roll holder Model no. 200.0940.0 for 800 mm wide couches Paper roll Model no. 200.1030.0 500 mm wide

for universal protection of building sites, continuous support tube, with welded plate for mounting in the base plate, film red / white attached on both sides, reflec- ting, film area protected by outer edge, socket 60 mm x 60 mm or 40 x 40 mm

-Controlled discharge of solids special manually operated scissor lock 300 x 300 mm -frame made of steel tubing -hopper made of steel plating with reinforced edging Types available Type SR -2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake, - construction height 220 mm Type SG -fork sleeves inside dimensions (wxh) = 175x65 mm, distance 565 mm -stacking corners Type SRE 2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake - construction height 220 mm fork sleeves inside dimensions (wxh) = 175x65 mm, distance 565 mm Types SR-D, SG-D, SRE-D design see above but with slide closure with a special seal on the hopper floor, for manual use, opening 300x300 mm, preferred for fine-grained bulk materials -spray painted or hot-dip galvanized -Volume (approx.) in l: 375 / 600 Accessories -galvanized lid, removable

Bush conveyor chains are often used for conveying tasksinvolving long transport distances at relatively low speeds. Since only a small minority of chains used in the industry are totally compliant with one specific standard, ELITE conveyor chains are custom-made to a specific customer order and consequently fulfil a large number of special requirements. ELITE highlights: • Pins usually made of heat-treated alloy steel, inductionhardened • Bushes made from seamless precision steel tube, case-hardened • Link plates made of high-strength tempered steel or case-hardened steel alloy • Rollers (where present) made of case-hardened steel, case-hardened

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. julie.julie@bcgraphite.com,86-15203753191

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. julie,julie@bcgraphite.com,86-15203753191

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. julie,julie@bcgraphite.com,86-15203753191

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. julie,julie@bcgraphite.com.86-15203753191

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. julie,julie@bcgraphite.com,86-15203753191

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. julie,julie@bcgraphite.com,86-15203753191

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. Our products have been addressed in many industries and applications around the world such as photovoltaic, EDM, semi-conductor, monocrystalline silicon, metallurgy, chemical, electric furnace, aviation, atomic energy, military enterprise, biomedical and the quartz industry etc. Julie,Julie@bcgraphite.com

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. Our products have been addressed in many industries and applications around the world such as photovoltaic, EDM, semi-conductor, monocrystalline silicon, metallurgy, chemical, electric furnace, aviation, atomic energy, military enterprise, biomedical and the quartz industry etc. Julie,Julie@bcgraphite.com

PingDingShan BaoCheng Carbon Co.,Ltd was established in June,2008. which is a integrated company of manufacturing and trading.we can provide you graphite blocks/ rods,and graphite machining products. Graphite blocks/rods:extruded graphite;molded graphite;vib molded graphite;Isostatic graphite. Graphite machining products:graphite tube,graphite plates,graphite rotor,graphite mould,graphite crucible and graphite parts according to clients’ drawings and requests. Our products have been addressed in many industries and applications around the world such as photovoltaic, EDM, semi-conductor, monocrystalline silicon, metallurgy, chemical, electric furnace, aviation, atomic energy, military enterprise, biomedical and the quartz industry etc. Julie,Julie@bcgraphite.com

CAPP offers a wide range of laboratory consumables to fulfill the needs of research, diagnostic, and analytical laboratories. These include pipette tips, filter tips, serological pipettes, PCR-products, tubes, strips, plates, and centrifuge tubes. Made from ultimate quality plastics, with an extra polished interior and visible markings, CAPP laboratory consumables are designed to work perfectly with CAPP instruments and ensure premium results when used with other brands of equipment. They are produced in state-of-the-art manufacturing facilities and feature premium design, with no compromise on quality parameters. The consumables are made from virgin polypropylene and are certified RNase, DNase, DNA, and Pyrogen-free. They are produced in a clean-room facility to eliminate the risk of contamination and feature Swiss-made injection molds, crystal-clear incremental marks for convenience of use, and universal compatibility to most pipette brands.

AHN offers a wide range of high-quality pipette tips that are suitable for various laboratory applications. The options include filter and non-filter, sterile and non-sterile, with low retention properties and an ultimate finish, preventing liquid retention by dispensing. These tips are made of 100% virgin polypropylene in a state-of-the-art production facility located in Central Germany. The pipette tips feature an optimized cone geometry and graduation marks for easy volume check, ensuring accurate and precise liquid dispensing. Multiple packaging options such as bags, rack boxes, and reload system are available to meet the needs of different lab setups. AHN's low retention tips enable maximum sample recovery and high-precision volume dispensing. In addition to pipette tips, AHN also offers other laboratory consumables such as PCR tubes, strips and plates, Petri Dishes, Centrifuge Tubes, and Reagent Reservoirs.