Thermal processing - Import export

Typical Fields of Application are in the chemical, petrochemical, railroad and shipbuilding industries, in the machine and industrial equipment construction. CSN® circulation heaters are manufactured in close coordination with our customers from a few watts to the megawatt range, a division in individual circuits is made according to customer’s requirements. Equipment for installation in hazardous areas we produce in protection class „Ex d“, „Ex de“, „Ex e“. On request, CSN® circulation heaters are supplied with optimized process controls. Please contact us to talk about the most appropriate control system. Schniewindt is certified by the Lloyd’s Register to produce equipment according to the Pressure Vessel Directive 2014/68/EU and a certificate from TÜV (Technical Monitoring Agency) certifies that we meet the prerequisites for welding procedures according to AD 2000 Merkblatt HP 0 / DIN EN 7293.

The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance

The GS Thermal Imaging System for Glass Processes from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and low emissivity glass products. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized glass applications – such as glass bending, forming, annealing and tempering – and industrial environments. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable

Thermal imaging system based on the Raytek MP150 infrared linescanner Automatic temperature and quality monitoring in continuous web processes Detect thermal problems early Faster product changes and reduced setup time Communicate with process control system via OPC Reduce scrap APPLICATIONS Plastics, metals, paper, and building industries, combustion prevention, hotspot detection, flat and float glass production, automotive, food processing and numerous other industrial applications FEATURES Onboard Ethernet TCP/IP communication Product specific configurations or “recipes” Custom measurement sectors Optional analog and digital outputs for each sector Analog outputs 3 x 4 – 20mA PC-independent alarm output Visualisation on PC Software supports English, German, French, Finnish, Dutch and Italian languages

Pleated Filter Cartridge Type: PPA Pleated PP-Membrane or nonwoven PP support nonwoven Hard cage Core + end caps made of 100 % polypropylene, meet requirements of FDA guidelines. Thermal welding processes seal all components No adhesives or extractable materials Version: DOE SOE 226 – O-Ring / Bayonet / Spear P7 SOE 222 – O-Ring / Flat P3 SOE 222 – O-Ring / Spear P8

The TF Thermoforming Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for thermoforming processes. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized applications and industrial environments. The TF Thermal Imaging System is ideal for applications reaching temperatures from 20 to 350°C (68 to 662°F). MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable

The Extrusion Coating EC Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes.The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field

Since decades, Reinhardt ovens “Made in Germany” are working day by day all over the world and are estimated by their reliability and long life time. Adapted to your requirements, a Reinhardt oven delivers the best results that are completely designed to your production process. In the temperature range up to 650° Celsius Reinhardt offers the best solutions for almost all requirements, for heating, tempering, drying, hardening, etc. all designed to your space conditions. All heating technologies, from electrical, direct or indirect gas, oil can be applied. Together with the customer, the Reinhardt industrial ovens are integrated into the production flow. In a classical batch oven, hood oven or pass through oven all thermal processes can be applied with the highest accuracy. Requirements such as lifting doors, charging carrier, transport and handling systems can be easily applied.

• Especially for automized applications • Very short, compact design, overall length including short flat nozzle 361 mm (14.2") • Installable as extension of the last axis of the robot • Overall weight including short flat nozzle 2.7 kg (6.0 lb) • No water condensation due to thermal insulation • Process reliable and wearless in permanent operation • Jetting width up to 125 mm (4.9") • For the cleaning of big surfaces in pretreatment before painting • For use with different nozzles

• Especially for automized applications • Very short, compact design, overall length including short flat nozzle 330 mm (13") • Installable as extension of the last axis of the robot • Overall weight including short flat nozzle 2 kg (4.4 lb) • No water condensation due to thermal insulation • Process reliable and wearless in permanent operation • Jetting width up to 125 mm (4.9") • For the cleaning of big surfaces in pretreatment before painting • For use with different nozzles

• For automized applications • CO2 consumption is controlled by pressure and temperature • Compact design, overall length 134 mm (5.3") • Customer-specific robot adapter • Weight without robot adapter 3.9 kg (8.7 lb) • No water condensation due to high efficient thermal insulation • Process reliable and maintenance-free in permanent operation • Cleaning width 200 mm (7.8")

Heating bands are the ideal solution for the heating of tubes an cylinders. Mica band heaters, frequently used as nozzle heaters, are made with a plastic-tight stainless steel casing. Such mica heating bands are in many dimension available from stock. The Ceramic heating band type is suitable specially for applications with high watt density and therefore for higher temperatures. Ceramic band heaters, also known as ceramic ring heaters or cylindrical ceramic sectional heaters, are attached to the contact surface by means of a clamping mechanism. A preferred field of use for ceramic band heaters is the heating of plasticising cylinders, bushings and nozzles of injection moulding machines and screw barrels of extrusion machines. For thermal optimization and process control ceramic band heaters can also be offered with insulation jackets or air cooling.

Our special solution for labeling fresh, moist or greasy food: Manufactured from a material approved for food. Water and grease resistant properties and printable in thermal transfer process. Suiting your needs we realize your individual label in true Bizerba quality. Bizerba labels for direct food contact safely and reliably fulfil their function: Our ISEGA-tested solution can be safely applied to your fresh, moist or even greasy food. Bizerba offers you various solutions: For multicolored preprints, paper or film labels with a permanent, special acrylate-based adhesive can be used. Another alternative with particularly resistant properties is our polyethylene film-based synthetic paper label. It combines the print quality of coated paper with the robustness of a high performance film: The label is tearproof and resistant against water, grease and chemicals.

Reducing energy, saving resources and safe processing have high priority in the chemical and petrochemical industry today. Our advanced liquid separation technologies are targeted to treat hydrocarbon based or solvent containing process streams and provide valuable tools for process intensification. Typically organic liquid streams are processed by conventional thermal unit operations that consume high amounts of energy, operate at high temperatures and/or require additional chemicals for efficient separation. Our membrane based solutions offer potent alternatives or additions for new processes and a valuable tool for the retrofit of existing unit operations. Our product range: - BORSIG Organic solvent nanofiltration - BORSIG Pervaporation - BORSIG Process development services

High performance cartridges and heating elements are excellently suited to direct heating of all kinds of tools. Area, ring and barrel heaters are suitable for heating boilers and moulds, tools, die plates, machine parts and a range of other purposes. They can be manufactured individually to size, voltage and output specifically for your application. High performance cartridges are suitable for tool heating in the many different fields in which a specific compatible operating temperature is required. High performance cartridges are essential in the thermal machining process field. High surface loadings facilitate a correspondingly high performance in a small installation area, at operating temperatures of up to 750°C at the heating cartridge jacket. We produce diameters between 6 mm and 45 mm to order. Different types of feed also allow high performance cartridges to be matched to the relevant installation situation.

TIM thermal imaging cameras are designed for non-contact measurement of surface temperatures from -20 °C to 1900 °C. They enable efficient monitoring and control of temperature-critical processes both with low temperatures (e.g. in cooling chains) and with very high temperatures (e.g. in glass and metal processing). Their high thermal sensitivity makes these infrared cameras ideally suitable for precise and dynamic tasks. Different performance classes enable a suitable model to be selected for every application. The camera is connected via a USB interface, which also supplies the power.

The importance of additives. Behind the Color Masterbatch, additives are often regarded as “colorless” companion. However, their significance is far more substantial. Additives can have a decisive impact on product manufacturing and product life cycles. Optimise manufacturing processes. In the manufacturing process, additives are important. As required, cavities can be filled more easily, for example, in the injection molding process, parts can be removed from the molds or deposits can be avoided. The profitability of the production process can also be decisively improved: additives can minimize cycle times or reduce processing temperatures. We would like to inform you about the scope for optimising your production processes. Add more values. In addition, additives protect thermoplasts and generate additional properties. Thus antioxidants, both during the thermal forming process and in the application, enable the resistance of the polymer against destructive temperature

miromatic – Utilises internally developed mixers in the process systems. The incorporation of process data enables precise reconciliation before and during the mixing process. In conjunction with the in-line process, this results in extremely gentle treatment of the products and a high degree of efficiency. Continuous production of fruit yoghurt, cream quark, fruit quark and herb quark, as well as thermally processed cheese Precision and low losses with type changes Compact layout and configuration of the system in line with customer wishes Bacteriologically compliant (hygienic) design of system parts – optionally available in sterile versions Your added value through miromatic mixing systems: Dosing accuracy +/- 0.5% Low fruit and product losses when changing containers Precision and low losses with type changes Extremely gentle product treatment (with low rotational speeds, no shear effect) Individual design of the mixing system to suit your process

— Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization — Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources — High supply reliability thanks to self-firing function — Robust, reliable and durable — Versatile design for use with different fuel types and as a multi-fuel firing unit (oil, gas, biogas, hydrogen) — Ideal for combination with combined heat and power units or gas turbines

Thermal imaging system based on the Raytek MP150 infrared linescanner. Detailed web temperature profile based on 40,000 measurement points per second Automated temperature monitoring Automated quality monitoring for ISO9000 Ensures proper web temperatures for strong film-to-substrate adhesion Enables plant operators to reduce scrap and improve profitability and product quality Quick and automatic detection of “wavy” or “running” edges, gaps, and torn edges Define product-specific configurations (recipes) Automatically analyze “automatic sector” temperature distributions Visualisation on PC Playback stored files as “movie” Multiple language support Integrated OPC server for remote system control Ethernet TCP/IP interface integrated in the line scanning system PC-independent alarm output Analog outputs 3 x 4 – 20mA Analog or digital output modules For sheet extrusion see the Raytek ES150 system.

Datapaq Furnace Tracker temperature profilers are available for all kinds of thermal processes in the metals, steel, and glass industries. The systems based on the Datapaq DP5 data logger are designed for short and medium duration processes. The portfolio includes a comprehensive range of high-accuracy, industrial-strength DATA LOGGERS with six or 12 measurement channels, various THERMAL BARRIERS that protect the electronics from heavy-duty process conditions, the Datapaq Insight ANALYSIS SOFTWARE, and a selection of fast-response, high-temperature type K or N THERMOCOUPLES. Designed to ensure minimum running costs, DP5 loggers store up to 10 profile runs before download to a PC. The built-in harsh-environment radio transmitter provides real-time data from within the process, speeding up fault-finding and process optimizations. The loggers can be recharged from flat to usable in just five minutes. A full charge via high-speed USB takes only 90 minutes and can provide 20 profile runs.

The DATAPAQ DP5 data loggers combine speed of readings, high accuracy and high resolution all in one versatile unit. They are used in short duration low height processes in electronics and coating curing applications. The DP5 data logger features include: • Temperature range: -100°C to 1370°C/-328°F to 2498°F (Type K thermocouples) • USB and Bluetooth communication • Fast sampling capability and large memory • Available in four height and width options and up to 12 thermocouple channels • User-replaceable NiMH battery and charging from any USB power socket ensure the Datapaq DP5 is always ready for use • Start/stop buttons and time or temperature trigger for improved user control

The Reactotherm is a heavy duty processor with an intensive mixing and kneading effect and self-cleaning ability. It is used for thermal processing of a wide variety of pasty, viscous, and fouling products. It can be operated continuously or batch-wise. The Reactotherm consists of a cylindrical, horizontal shell and a rotor with segmented discs and mixing bars. Stationary mixing hooks are attached to the inside of the shell. The close clearance between the mixing hooks, the segmented discs and the rotor result in a high mixing and kneading effect and the self-cleaning properties of the rotor. The inside of the shell is cleaned by the mixing bars. Fouling of heat exchange surfaces and the formation of agglomerates are avoided. The shell, the rotor shaft and the discs can be heated or cooled. The product transport is accomplished by the slightly pitched mixing bars.

DATAPAQ Furnace Tracker systems offer accurate and reliable in-process temperature profiling and surveying solutions for a wide variety of demanding high temperature heat treatment processes in the glass and metalls industries and in aluminum manufacturing (Annealing * Brazing * Homogenizing * Decorating * Tempering * Forming * Frit Sealing * Normalizing * Billet Reheating * Slab Reheating * Pressure and Vacuum Processes). TB4000 Series Thermal Barriers: Rugged 304 stainless steel construction Microporous insulation provides the best thermal protection of any known material Various heights available to meet limited clearances TB4900 Series Thermal Barriers Exceptional durability and thermal resistance Outstanding resistance to oxidation and distortion One way lid and base alignment avoids thermocouple damage DATAPAQ temperature profiling systems comprise high-accuracy industrial-strength data loggers, thermocouples, thermal barriers, and analysis software.

Short path distillation is a thermal separation technology operating at process pressures in the range of 1 to 0,001 mbar. It lowers the boiling temperature and is an excellent method for gentle thermal treatment of heat sensitive, high boiling products. The short path evaporator consist basically of a cylindrical body with a heating jacket, a rotor and an internal condenser. The rotor creates a mechanically agitated, thin product film on the heating surface inside of the body. By means of gravity the product flows down in a spiral path, whereby the volatile portion of the product evaporates. The vapour passes by the shortest route and with practically no pressure drop to the internal condenser. The non-volatile portion reaches the lower part of the evaporator and is discharged through the bottom product outlet. The residual vapours and inert gases flow through the vacuum nozzle to the vacuum system.

The automotive industry standard in thermal profiling of paint cure processes Silicone-free technology Multiple oven tests possible before returning to PC Process Pass/Fail at oven exit Up to 16 measurement locations in a single run Hard wired real-time data analysis from batch ovens Fully customizable and easy-to-use Insight analysis software Wide range of thermal barriers & thermocouples to suit your process needs

Our low bac honey (low bacteria = germ-reduced) has been specially developed for microbiologically demanding and sensitive products. Our internally developed thermal process reduces germs by heating the honey.

Plastic-coated steel cablestrands are cut to length using a special shear cut module and then stripped with the cutting module of the AM3500 without the wires "jumping open".Bare steel cable wires are transported by the modified AM 3500 directly to the special cutting machine, which is coupled between the AM 3500 and the material stacker and which cuts the material to length by a thermal process. Due to the special electric welding process used here, the individual wires do not twist up during cutting, and a smooth rope start and a smooth rope end without thickening are produced. Long steel cable wires/strands are placed in a tray after processing, while short pieces of material fall down a chute into a collecting container. With the high-performance solution developed by Metzner, the customer can process different types of material in different processes. Further advantages of the machinery are high precision, high quality, an increase in productivity and lower personnel costs.

Synthetic, white diffuse reflective raw material as foils. Features: High degree of reflectance from 250-2500nm with 98% at 555nm. High stability to optical and thermal radiation. Further processing by the customer or Gigahertz-Optik GmbH.