System modern - Import export

Corner unit system For modern corner unit systems AGOFORM offers a matching interior organizer system available in three different sizes. In terms of functionality and design generously appointed compartments leave nothing to be desired. What's more, the corner unit solutions can be additionally combined with the variable ORGA-LINE interior dividers from the manufacturer Blum.

Corner unit system For modern corner unit systems AGOFORM offers a matching interior organizer system available in three different sizes. In terms of functionality and design generously appointed compartments leave nothing to be desired. What's more, the corner unit solutions can be additionally combined with the variable ORGA-LINE interior dividers from the manufacturer Blum.

GSW Roll Feeds Precise and fast positioning with lasting performance. Built with the attributes of parallel adjustment of the top roll, highprecision roll guiding and mechanical stroke limitation for fastest cycles. In combination with most modern motion control systems our Roll Feeds feature a highly reliable production support with dynamic feeding performance of max 30 m/s² acceleration. For smaller crosssections we offer the HSseries Roll Feed model This dynamic and costeffective solution makes the upgrade from gripper feeds to the much more flexible roll feed technology affordable. from coil up to 2000 mm material width and up to 8 mm thickness max crosssection approx. 2000 x 5 mm Vmax approx. 80 200 m/min max cycles with pilot release approx. 100 220 SPM from plate or bar up to 20 mm material thickness

The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate

The ViscoMT-XL drum emptying system offers a modern way of emptying containers. The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - Bridge frame can be driven underneath with drums on pallets - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

The compact MEMDOS SMART LP stepper motor pump combines the size advantages of a solenoid diaphragm dosing pump with the precision of a motorised diaphragm dosing pump. This pump is available in five performance ranges, making it suitable for different applications. The drive of the MEMDOS SMART LP is fully controllable, which allows the stroke frequency to be continuously adjusted and thus ensures precise dosing. The ability to integrate the pump into sophisticated automation networks is particularly noteworthy. A version with an Ethernet-based MODBUS interface is available for this purpose, allowing seamless communication and control within modern industrial systems.

VARIO cutlery inserts With the VARIO cutlery insert series AGOFORM presents a product that meets all the criteria of a modern drawer organizer system. The drawer insert series is based on transverse cutlery compartments and a multi-purpose section offering space for alternative storage. The high-grade combination of wood and synthetic material rounds this product group off. On request AGOFORM will be happy to include accessories, such as knife blocks, variable dividers and spice jar inserts for twelve or six jars – in an attractive solid beech look. This range is rounded off by a variable multi-purpose insert that can be partitioned to suit. As far as drawer organization goes, VARIO offers an array of options. The stylish wood dividers are slotted in longitudinally to meet individual storage needs. It goes without saying that AGOFORM's claim to optimum user-friendliness applies here too: thus the insert can be cut to size to fit any drawer system in all drawer widths from 300 mm to 1200 mm carcase width. The four different build-in depths 450, 500, 550 and 600mm complete the range.

VARIO cutlery inserts With the VARIO cutlery insert series AGOFORM presents a product that meets all the criteria of a modern drawer organizer system. The drawer insert series is based on transverse cutlery compartments and a multi-purpose section offering space for alternative storage. The high-grade combination of wood and synthetic material rounds this product group off. On request AGOFORM will be happy to include accessories, such as knife blocks, variable dividers and spice jar inserts for twelve or six jars – in an attractive solid beech look. This range is rounded off by a variable multi-purpose insert that can be partitioned to suit. As far as drawer organization goes, VARIO offers an array of options. The stylish wood dividers are slotted in longitudinally to meet individual storage needs. It goes without saying that AGOFORM's claim to optimum user-friendliness applies here too: thus the insert can be cut to size to fit any drawer system in all drawer widths from 300 mm to 1200 mm carcase width. The four different build-in depths 450, 500, 550 and 600mm complete the range.

Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements over the last few years regarding measurement accuracy and reliability of temperature measurements has meant that many equipment operators must reconsider the suitability and performance capacity of their temperature measurement equipment. Resistant thermometers can be used between -200 °C and +850 °C. An important common property is that their output parameters are available in the form of electric signals that can be relatively easily transferred to measurement and control instruments for processing, storage and display.

If the demands on your product are constantly increasing, we will help you keep up with your systems. In a personal meeting, we will find the best options for retrofitting your systems and applications and bring your system up to date.Typical modernizations and retrofits include the following:Computer exchange.Control update / exchange.Spindle exchange.Extension by additional axes.Retrofit tilt and swivel unit for 5-axis machining.Additional automation technology.Software solutions.Loggingfunktionen

DIGIFORCE® 9311 is the new standard in efficient quality control. The pioneering force/displacement controller delivers rapid, precise evaluation results for applications that demand both high quality and high productivity. The smart performance features and intelligent hardware make test equipment quicker to set up, easier to use and capable of automatic integration in modern production systems. This unrivalled product specification gives businesses the added security and dependability they need for increasingly complex production processes. The DIGIFORCE® 9311 monitors processes in which precisely defined functional relationships need to be demonstrated between two measured quantities of the process. For instance when recording and monitoring processes such as press-insertion, joining, riveting, stamping or caulking, reliable quality control depends on synchronous and high-speed acquisition of measured values combined with analysis based on versatile evaluation elements.

The ViscoMT-D bin emptying system offers a modern way of emptying small containers and bins cleanly. The use of our dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 100 ml to 5 l - viscosities of approx. 80,000 - 1,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of filler-loaded material - no backflow within the withdrawal pump - electrical control of the pump with pressure control - direct dosing from the container possible - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, fats, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes)

The ViscoMT-L 3 / 18 barrel emptying system offers a modern way of emptying containers.The connection with the ViscoTec VMP dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 50 l to 300 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - removal of materials loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

Schlötter Systems Dr.-Ing. Max Schlötter GmbH & Co. KG is among the leading manufacturers of electroplating systems and surface treatment facilities. With more than 1,000 systems realized since 1957, we draw upon a wealth of experience in production-ready solutions. At Schlötter, we leverage our expertise in systems engineering and surface technology to precisely tailor each system to the coating processes required by our clients. We design and manufacture rack, barrel, and manual systems, modernize facilities, and support our customers with our systems technology services throughout the long lifespan of our systems. Rack systems Barrel systems Manual systems Electroplating systems Anodizing systems Cleaning and pickling systems Chemical systems Printed circuit board systems Plastic electroplating systems Schlötter Systems in All Surface Technology Industries Schlötter systems are utilized for a wide range of surface technology applications.

The CS-3000 suspension system is characterised by a combination of well thought-out ergonomics and modern industrial design. It consists of a large number of components that can be combined in any way. The CS-3000 suspension system is an innovative system solution that functions according to the modular principle. — Long service life and safe operation thanks to anodised aluminium tubes — Clean lines, thanks to smooth transitions between the tube and system components (very easy to clean) — Coated tube fastening screws for sealing the thread holes and secure connections — Relative appearance and connection of narrow profiles thanks to the possibility of reducing the cross section from square to round tube — Protection class IP65 — Modular flexible system lets you upgrade the couplings (also after installation), e.g. with adapters for slim enclosures or with tilt adapters — Well designed ergonomics for simple and virtually fatigue free operation

Our systems dose in parallel into stationary and mobile tanks. The systems work with mass flow meters or measuring cells and scales. Dosing cluster ■ Dosing of large components for mixtures up to 12 tonnes ■ Stationary or mobile tanks ■ Flow rate: 30 - 250 litres/min ■ Parallel dosing with several scales or with mass flow meters ■ Barcode-supported dosing ■ Unattended operation ■ Integrated suction on the dosing cluster ■ Different weighing ranges ■ Explosion protection according to Atex The advantages are obvious: simply add the remaining large components to your premixes - in a single additional work step - and of course with barcode support and fully automatically. With our modern storage systems, you can remove large components from several drums simultaneously at any time. Labour and cleaning-intensive pumping from drums into mixing containers is a thing of the past.

Membrane and bladder accumulators are important components of modern hydraulic systems. Monitoring the nitrogen pressure level is becoming ever more important for ensuring correct operation. The STAUFF Accumulator Adaptor together with the PT-RF pressure sensors allow maintenance personal to quickly and easily check the accumulator pressure without pressure loss. Pressure values, serial numbers, date and time will automatically be stored in the memory of the reader and then easily and conveniently read out on the PC later on. For this, the Accumulator Adaptor is screwed onto the nitrogene connection of the accumulator and a PT-RF pressure sensor is attached at the side. ▪ max. Pressure: 400 bar / 5801 PSI ▪ Burst Pressure: 1600 bar / 23206 PSI ▪ Sealing Material: NBR (Buna-N®)

"Escargot seasoning Juicy steaks, delicate fish dishes, grilled vegetables, freshly baked bread - there is only little that cannot be refined by subtly seasoned herb butter. Create your own herb butter specialities with our versatile seasoning with lots of herbs and a touch of garlic. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-mail: b2b-international@hela.eu Phone: +49 4102 496-0 Internet: www.hela.eu Video: https://www.youtube.com/watch?time_continue=5&v=awbvoU2oopU"

Hela Curry Garathi 300g the light roasted note harmonizes perfectly with all hot curries, shelfishes and crustaceans, fish, poultry, vegetables and dark types of fish like tartar and carpaccio of fish and meat. Severity level: +++++ Without additives to be declared on menus (as per §9 of "Zusatzstoff-Zulassungsverordnung", Germany). Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team comprises of more than 600 dedicated, qualified colleagues from a wide range of fields. With 10 locations worldwide, we deliver to over 30,000 satisfied customers in more than 70 countries. Aside from our standard range we develop products as per individual customer's demands. E-mail: b2b-international@hela.eu phone: +49 4102 496-0 internet: www.hela.eu Video: https://www.youtube.com/watch?time_continue=5&v=awbvoU2oopU

Marinating hot chili oil -Natural- with sea salt Some like it hot! A real recommendation for your spicy hot grill skewers, crispy grilled belly slices or delicious juicy neck steaks. Our insider tip: Chili Wings - not for the faint-hearted! Maybe not mainstream, but you have to try it! Without added allergens*. Also suitable for bread products. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-Mail: b2b-international@hela.eu Tel.: +49 4102 496-0 Internet: www.hela.eu *as per EU regulation 1169/2011

Compound for Bratwurst (FINE) ProFit It is the classic on the grill and in the pan, everyone knows it, everyone loves it: the fine Bratwurst. With our compound mixture you can easily and safely produce delicious fine Bratwurst varieties, spicy in taste and with good browning properties. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-Mail: b2b-international@hela.eu Tel.: +49 4102 496-0 Internet: www.hela.eu Video: https://www.youtube.com/watch?time_continue=5&v=awbvoU2oopU

Marinating oil curry -Natural- with sea salt Refines in particular all poultry parts and skewers, also with vegetables, as well as lamb. Specially developed for lovers of the "classic" Indian taste who do not like it so hot, but prefer a very balanced composition with a subtle fruity note. Without added allergens*.Also suitable for bread products. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-Mail: b2b-international@hela.eu Tel.: +49 4102 496-0 Internet: www.hela.eu *as per EU regulation 1169/2011

Curry Spice Ketchup hot, 800ml The high portion of selected spices and herbs gives our spice ketchup its matchless taste. Perfect with French fries, Currywurst and any kinds of grills. A great companion also for rice dishes and pasta. Or use it as a marinde or to fine-tune sauces. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service in industry as well as in small and medium-sized enterprises. Hela was founded in 1905. Today our team comprises of more than 600 dedicated, qualified colleagues from a wide range of fields. With 10 locations worldwide, we deliver to over 30,000 satisfied customers in more than 70 countries. Aside from our standard range we develop products as per individual customer's demands. E-Mail: b2b-international@hela.eu Tel.: +49 4102 496-0 Internet: www.hela.eu Video: https://www.youtube.com/watch?time_continue=5&v=awbvoU2oopU

Seasoning Hamburger "MC" Extra For succulent burgers with a fluffy bite. The seasoning adds a fine-aromatic flavour with a slight pepper note to the meat. Due to encapsulated salt no precious meat juice is drawn from product, it remains succulent and delicious. Perfect for other minced meat dishes, too. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service in industry as well as in small and medium-sized enterprises. Hela was founded in 1905. Today our team comprises of more than 600 dedicated, qualified colleagues from a wide range of fields. With 10 locations worldwide, we deliver to over 30,000 satisfied customers in more than 70 countries. Aside from our standard range we develop products as per individual customer's demands. E-Mail: b2b-international@hela.eu Tel.: +49 4102 496-0 Internet: www.hela.eu Video: https://www.youtube.com/watch?time_continue=5&v=awbvoU2oopU

Marinating oil Gyros Natural with sea salt Gyros, pan-sliced or grilled lamb chops, souvlaki or bifteki - with our seasoning oil Naturell Gyros you give your hearty meat specialities the irresistible taste of Greece. With a delicious garlic note and a lavish Mediterranean herb bouquet. Without added allergens*. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-Mail: b2b-international@hela.eu Tel.: +49 4102 496-0 Internet: www.hela.eu *as per EU regulation 1169/2011

"Marinating Oil Tomato with Sea Salt Add this certain Mediterranean something to your BBQ specialities! Great on meat, fish and seafood, but a highlight also on aubergines and courgettes or fresh baguettes. For tempting colour and the extra taste of fruity, sun-ripened tomatoes. No added allergens*. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-mail: b2b-international@hela.eu Phone: +49 4102 496-0 Internet: www.hela.eu Video: Video: https://www.youtube.com/watch?time_continue=5&v=awbvoU2oopU"

"Steakal OG Steak Seasoning With our steakal OG you can turn your juicy grilled steak into a real delight for your taste buds - just sprinkle it on to perfectly underline the full meat flavour. Mixed with oil you get a spicy marinade, together with green pepper corns you create wonderfully racy pepper sauces. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-mail: b2b-international@hela.eu Phone: +49 4102 496-0 Internet: www.hela.eu Video: https://www.youtube.com/watch?time_continue=5&v=awbvoU2oopU"

Marinating oil Provence -Natural- with sea salt The aromatic, powerful herb note, delicious red pepper pieces and the characteristic hearty garlic note conjure up the taste of Provence on your plate in late summer. It goes well with all types of meat, especially with lamb and seafood. Without added allergens*. Also suitable for bread products. Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-Mail: b2b-international@hela.eu Tel.: +49 4102 496-0 Internet: www.hela.eu *as per EU regulation 1169/2011

Compound ''FINE'' for Mettwurst Piquant seasoning mixture for the production of hearty, firm raw sausages. Whether in small calibre as a snack or classic as a cold cut, the spicy pepper note with a hint of garlic ensures a real treat for the palate. We are happy to help you with the selection of starter cultures, just contact us! Hela. We are your competent partner for taste and modern functional systems for meat processing, HoReCa and food service, for the trade as well as for industry. Hela was founded in 1905. Today our team consists of more than 600 dedicated and qualified colleagues from various fields. With 10 locations worldwide, we supply more than 30,000 satisfied customers in over 70 countries. In addition to our standard product range, we also develop products individually according to customer requirements. E-mail: b2b-international@hela.eu Phone: +49 4102 496-0 Internet: www.hela.eu Video: https://www.youtube.com/watch?time_continue=5&v=awbvoU2oopU