Storage area - Import export

Safe and powerful For an efficient body shell process, the correct bodywork components must be reliably brought from their intermediate storage areas and production lines to be assembled. Lödige’s materials handling and control solutions automate this procedure. Your advantages using Lödige solutions in the body shop: Connection to the pressed component store Conveying on several levels possible Connection to bodywork store Horizontal materials handling systems High levels of automation possible Control connection to robotic systems

ATEX certified flameproof thermostats ATEX EEx d IIC T6 The Exheat „HFT“ flameproof thermostat are ATEX certified, suitable for installation in zone 1 or 2 hazardous areas. It is designed for the temperature control of work or storage areas, in conjunction with a hazardous area air heater.

The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. This prevents the danger of the liquid splashing while being poured from a high height – for example if the filling container is standing on the floor. The user also has both hands free while dispensing and is able to remove larger quantities conveniently. A scale with container can also be placed on the storage area so the liquid that is being dispensed can be measured accurately. The holder can be used for Bürkle pumps with discharge tube or discharge hose. Discharge hoses can easily be inserted into the foldaway fastening. Can be used for plastic or stainless steel drums.

Hazardous area convector heater ATEX II 2G IECEx & II 2 G EEx e IIC T2 – T4 ATEX The „FCR“ range of convector heaters has been designed to provide space heating in work or storage areas located in zone 1 or 2 hazardous areas, where the flammable atmosphere is a group IIA, IIB or IIC gas.

Flameproof air warmers ATEX II 2 G/D IECEx & ATEX Ex ’d’ IIC T2 – T4 The FWD range of air warmers is designed for use in small work or storage areas which are located in Zone 1 and 2 or Zone 21 and 22 Hazardous Areas where the flammable atmosphere is a IIA, IIB or IIC Gas Group.

HR-Structures canopies without wall cladding: The ideal solution to quickly create covered loading zones and storage areas. Our storage tents protect from direct sun, rain, hail or snow from above. The areas of application of our canopies: - Storage for weather-insensitive goods - Protected loading of transporters - Protected parking and storage area - Picking for all kinds of goods - Roofing of sports facilities The covering of your roofing can be freely chosen between a PVC tarpaulin or a trapezoidal sheet. Our highly tear-resistant PVC tarpaulin can be installed quickly and cost-effectively due to its low weight, while our trapezoidal sheets offer even better weather protection and the possibility of installing photovoltaic modules. Depending on your wishes and local conditions, your roofing can be anchored using ground nails or dowels to ensure maximum stability.

Flameproof air warmers ATEX II 2 G/D IECEx & ATEX Ex II 2 G/D Ex d IIC T2 – T4 The „FWDT“ range of air warmers with an easy to adjust external thermostat is designed for heating small work or storage areas and similar applications, located in zone 1 and 2 or Zone 21 and 22 Hazardous areas, where the flammable atmosphere is a group IIA, IIB or IIC Gas Group.

Hazardous area air warmers ATEX II 2 G IECEx & II 2 G EEx e IIC T2 – T4 ATEX The FAW range offers a versatile lightweight air warming solution for small work and storage areas located in Zone 1 and Zone 2 Hazardous Areas. The range is suitable for use with 1 phase or 3 phase power supplies up to 440 volts. The range can also be configured for use with DC power supplies.

Our uninsulated halls offer simple and inexpensive all-round protection for the storage of temperature-insensitive goods. They are ideally suited for storage, roofing of construction sites or for temporary assembly. The areas of application of our uninsulated halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair For your roof and wall covering you can choose between a PVC tarpaulin or a trapezoidal sheet. Made of highly tear-resistant, and durable industrial PVC, tarps are a cost-effective alternative compared to other cladding options.

One or several TWS take over products or complete load carriers such as pallets in the high-bay shelf storage area. The TRAPO Warehouse Lift (TWL) receives a TWS in order to store and retrieve in the storage lanes via a rail system at different levels. The TWS covers three metres per second at an acceleration rate of 1.5m/s² and completes the cycle of driving out, gripping and driving in in a maximum of three seconds.

The 44 Kg TTW 25000 S barrel fan with dimension 1,060*525*1,140mm is designed to introduce a cost efficient option for semi-professional use both indoors and out being no less than the similar TTW series that are much more professional and expensive.In places where there is a requirement for high air exchange rates within investment expenditure such as ventilation tasks in production environments, agriculture or storage areas,these barrel fans are quite efficient. The device with a galvanized steel case and a chassis is also equipped with an inclined drum capable of being variably aligned for vertical flow positions,making it easily portable.This enables the direction of air current at high wall or ceiling sections as well. Practical advantages: A cost-saving option for semi-professional ventilation applications Air circulation capacity to 27,600 m³/h Plug-in devices easy to handle

Electrical Surface Heating that brings heat to cold areas – for cold storage and cooling chambers as well as industrial plants and open spaces.

As one of the largest independent contract manufacturers in Germany, the Pritzwalk gear factory (ZWP) based in Brandenburg undertakes the following production: Ring gears, gears, planetary gears, sun gears and shafts with internal gearing. Due to our generous outdoor storage area, ZWP can store the raw material for long-term procurement projects. This means that there are no lead times for special materials, so that a waiting time of e.g. 3-6 months can be avoided. Immediate access to materials is possible and production can take place immediately. The rising raw material prices, long waiting times or availability of the material used make warehousing and production according to defined lot sizes interesting again. Delivery call-offs can be made with immediate delivery capability and cost savings. Finished parts are of course preserved inside. We are looking for a conversation with you for a holistic solution.

As one of the largest independent contract manufacturers in Germany, the Pritzwalk gear factory based in Brandenburg undertakes the following production: Ring gears, gears, planetary gears, sun gears and shafts with internal gearing. Due to our generous outdoor storage area, ZWP can store the raw material for long-term procurement projects. This means that there are no lead times for special materials, so that a waiting time of e.g. 3-6 months can be avoided. Immediate access to materials is possible and production can take place immediately. The rising raw material prices, long waiting times or availability of the material used make warehousing and production according to defined lot sizes interesting again. Delivery call-offs can be made with immediate delivery capability and cost savings. Finished parts are of course preserved inside. We are looking for a conversation with you for a holistic solution.

To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.

Funnel stand with two funnel holders and two reducing inserts. Space-saving design with two practical storage areas. Sturdy and stable funnel stand, resistant to chemicals, shatter-proof and with continuously variable height adjustment. The funnel stand is suitable for all funnels from 40 to 180 mm in diameter. The funnel holders can be used with reducing inserts for small funnels. The funnel stand also makes an excellent filtering stand. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. The laboratory stand can be flexibly adapted with corresponding accessories, for example with adjustment funnel holders or a holder for Imhoff funnels. The funnel stand can also be converted into a pipette stand.

Stainless steel desiccant dehumidifier TTR 250 The TTR 250 guarantees reliable adsorption air dehumidification in the corrosion-resistant stainless steel housing The low-maintenance TTR 250 stainless steel desiccant dehumidifier does not only guarantee high dehumidification values especially at low dew points. Its housing is also known for a high corrosion resistance and good hygiene characteristics. The TTR 250 is therefore perfectly suitable for humidity regulation in production and storage areas as well as for protection against corrosion and condensation in all humidity-sensitive environments and facilities where special hygienic standards apply or where there are extremely material-straining atmospheres.

Our thermally insulated halls are the highest quality solution and offer the best protection for sensitive goods. Thanks to all-round high insulation by means of sandwich elements, these lightweight halls can be used in all areas. The areas of application of our thermally insulated halls: - Storage for sensitive goods - protected parking and storage space - Assembly and commissioning for goods of all kinds - Maintenance and repair - Production and workshop - Sales and exhibition areas Benefit from the excellent heat-insulating and low-maintenance properties of full cladding made of sandwich elements. They consist of two outer shells made of steel and a foam core made of polyurethane or mineral wool, thus ensuring optimum insulation. This means that the energy required to heat the industrial hall can be significantly reduced. As a positive side effect, appropriate noise protection is generated at the same time.

HR-Structures' lightly thermally insulated industrial halls are equipped with Thermoplane roofing and sandwich panel wall cladding. This combination is the smartest solution for slightly temperature-insensitive goods. The areas of application of our lightly thermally insulated halls: - Storage for slightly temperature-sensitive goods - Protected parking and storage space - Assembly and order picking for all kinds of goods - Maintenance and servicing Roofing by means of Thermoplane is the best solution if no elaborate insulation measures are desired, but condensation and condensation water in the hall are to be avoided. It consists of two shells which are filled with air and thus provide additional insulation. Wall cladding made of sandwich elements is the best way to gain the maximum insulation.

Self-adhesive floor-marking shape “T” for indicating danger zones, storage spaces, walkways etc. • Floor marking shape: "T" • Floor-marking shape for indicating dangerous areas, storage spaces, walkways, etc. • Self-adhesive symbol for application on floors in interior areas • Abrasion resistant and hard-wearing • Colour code: RAL 1003 signal yellow

The OPTIFLEX 1100 is a guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for basic storage applications in non-hazardous areas. The level transmitter is a higher performing replacement for traditional level transmitters such as RF capacitance or conductive level transmitters. It offers 3 types of probes which can all be shorted on site.

Multidirectional sideloader with electric drive in the load classes between 1.5 t and 50.0 t. These all-purpose industrial trucks can be used for the handling of long goods, sheet metal , chip boards, tools, cable drums, rollers, oversized pallets and round bars in narrow aisle rack systems or free range within indoor and outdoor areas. Within the production series, the industrial trucks can be tailor-made to meet the individual requirements of the customers. load bearing capacities from 1.5 to 50.0 t for indoor and outdoor applications guided operation in narrow aisles or free range multidirectional steering for optimal manoeuvrability quiet and environmentally friendly electric drive AC motor technology for reduced energy and maintenance costs reduced wheel arm height for optimized utilization of the lower storage rack areas

S Styrofoam chips must be stored in warehouses and occupy valuable storage areas. FLOETER offers the economically and ecologically correct solution here: Compact air cushion rolls are easy to process, space-saving and recyclable. Wrapped in the right air cushion-type film, your goods are economically and effectively protected. Positive impact for the environment - with air cushions With the innovative air cushion systems from FLOETER, your employees can be sure that they are doing something good for the environment. The FLOETER air cushion systems meet the required legal standards and regulations. In addition, FLOETER is certified according to ISO 9001: 2015 and applies the environmental management system according to DIN EN ISO 14001: 2015.

Metzner has developed a fully automatic processing machine with outstanding cutting quality and great length accuracy for steel cable wires of up to 20 mm diameter. The steel cable wires are fed by a motorised feeding device in combination with a contact-free loop control. Then, program-controlled and positionally accurate marking tapes are applied to the steel cable – with a cycle time of less than two seconds. In addition, a wax printer marks all the fastening and processing points that will be required for subsequent processing. This labelling method is carried out in a continuous process. The cut is then made using a special cutting process. Precise length accuracy is achieved by a special laser measuring system. A material stacker with a storage area of up to 12 metres ensures that the steel cable wires are deposited in an orderly manner. All cut steel rope can be stored and sorted according to length to allow it to be removed at a later point.

This laser system is quickly set up for the welding task. The flexible laser arm can be rotated 360 ° and offers a very high or low working position. The laser head can be rotated to the left and right and the tilt-swivel lens directs the laser beam to the point desired by the operator. The robust housing has stable aluminum handles at the corners for increased impact protection of the edges. Integrated fastening options are available here for easy lashing during transport. The gas bottle can be transported during welding with a small trailer, the 5th wheel on the laser. Generous storage areas and special brackets on the machine sides ensure that tools, welding wire and whatever else is always within reach. Operation is intuitive via a touch display. Some apps help to weld surfaces, shafts and circular welds. The 450 W fiber laser can be used for pulsed welding or for welding in CW mode.

Container trolleys for boxes: This shapely and flexible trolley is solid and specifically suitable for storage and shipping areas. Its slight dimensions allow you to drive it through narrow corridors easily. Standard versions include boxes, handle on one narrow side, 4 solid rubber-tyred guide rolls (100 mm Ø), ball bearing, 2 of which featuring an arresting device. Containers with half-opened front as well as cardboard boxes of the most various sizes can take place on this solid trolley space-saving and orderly. Closed or wire sides and back walls are optionally available. Transport trolleys for stacking boxes: These mobile transport trolleys can be used to load assembly lines or as a convenient order picking assistant! These trolleys can be also delivered in a custom size (special dimensions) according to your wishes. Platform lay-up shelves with anti-slip grooved covering are also available for for the carrying of cardboard boxes, containers and many others.

We can manufacture doors for chiller coldrooms and freezer storage areas (both hinged and sliding varieties). Delivery time for standard products is 2 - 3 weeks.

We can manufacture doors for chiller coldrooms and freezer storage areas (both hinged and sliding varieties). Delivery time for standard products is 2 - 3 weeks.

We can manufacture doors for chiller coldrooms and freezer storage areas (both hinged and sliding varieties). Delivery time for standard products is 2 - 3 weeks.