Results for
LÖDIGE INDUSTRIES GMBH
Germany
Goods lift for moving goods and passengers safely and efficiently Multi-passenger transport with ESCORTA - special option only from Lödige The ESCORTA goods lift is the ideal solution for easy vertical transportation in multi-level storage and production facilities. Thanks to its new certification (European Machinery Directive 2006/42/EG and DIN EN 81-41) multiple persons can now simply ride in the lift with their goods to the desired floor. This upgrade option ease the flow of goods and people, increases the level of comfort, making transporting goods between levels much easier and more pleasant. In its standard configuration, it has a load capacity of up to 3,000 kilograms and a lifting height of up to 18 meters (with two to six stopping points). The ESCORTA lift can be individually configured in great detail in terms of size, lifting height, materials and look. Cabin dimensions can vary greatly, with length, width and height each reaching nearly three meters.
Request for a quoteMETO INTERNATIONAL GMBH
Germany
The devices are equipped with an exclusive label edge detector 'Mech Sensor System ". This automatically detects the leading edge of the label and provides absolute dispensing accuracy of form labels. There are no special transport cuts or sensor marks required. Suitable for label sizes of 18 x 20 mm up to 100 x 60 mm.
Request for a quoteKAUP GMBH & CO KG
Germany
The extensive and many-sided drum clamp programme of KAUP encloses attachments which clamp, tip and turn single drums. Other attachments can carry up to four drums pre and side by side. The wide port folio is complemented by special solutions for the transport of special drums, by slip-on drum arms and drum tipping arms for already existing fork clamps.
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Keiper PU wide timing belts are made of abrasion-resistant polyurethane and high-strength aramid cords in widths up to 600mm. These timing belts are specially designed for synchronous transport applications. In view of the production width as well as outstanding mechanical and chemical properties, they can be used for many applications. Moreover, it is possible to use special materials such as, for example, polyurethane that is suitable for contact with foodstuffs, or a nylon coating on the tooth facing and back side. Properties and special features: High-strength aramid tension cords Parallel arrangement of tension cords for even distribution of tension Form-fit, synchronous running Low-noise, high abrasion resistance and flexibility Applications: As a substitute for transport belts for synchronous positioning Applications in the foodstuffs industry Sausage, meat and cheese processing Conveying of bulk goods
Request for a quoteSAMSYS GMBH
Germany
ar feeder for special profiles wanted ? To extend the MULTI 3000 to the bar feeder for special profiles, the Uni-erector can be mounted optionally. It enables the erection of rectangular profiles and special profiles for further transport to connected machine tools. Thus a smooth reloading process is possible. By simply setting a parameter, the erector can be selected or deselected. This enables a quick changeover from round material to a special profile. By deactivating it, the bar loader can load round or hexagonal material as normal. While with activated parameter the bar feeder will load the special or rectangular profile while the reloader is erecting. The use of square material is also optionally possible. The erector consists of two opposite rollers. To erect the material, these rollers move together during reloading. When the bar is threaded into the machine tool, the rollers open again. The distance between the rollers can be easily adjusted.
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
Combination machine for thick and thin: The AMS 533 TWIN skinning machine is particularly suited to processing cuts with thick tendonsand skin, such as pork loin, pork silverside, beef or veal silverside and boiled beef fillet. Advantages Removal of tendons and skin with one machine TWIN transport rollers and specially coordinated blades providethe highest possible yields Ideal cutting width for powerful skinning and tendon removal inlarge and small cuts Effort-saving work table design due to ergonomicmachine assembly Blade guard in cleaning position Gear brake motor with quick stop Product-specific precision adjustment Options: Quick-clamp blade holder for tool-less blade changing Body lever switch Skinning procedure protection Skinning gloves Special tension rollers
Request for a quoteSCHAAF TECHNOLOGIE GMBH
Germany
Long-lasting staple products Though food-extrusion is often associated with "fun" products like snacks and breakfast-cereals in a wide variety of shapes, sizes, colours and flavours targeted to children, the technique is also employed for some staple foods. One such product category is that of "flat-bread" or "crisp-bread". "Flat-" or "crisp-bread" is essentially an extruded strip that is cut into specified length and dried to a low enough moisture level to enable a long shelf life under ambient conditions. The advantages of the extruded flat-bread are - Option of using various blends of different cereals to achieve desired taste, texture and nutritional value Long shelf life without special storage environment Easy transportation and use for different occasions Diverse uses; can be eaten with various toppings, or asa sandwich with a filling in between two slices.
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
We process the following materials: ■ chrome-nickel steel ■ various types of steel ■ non-ferrous metals ■ various aluminium alloys steel processing, stainless steel, machine engineering, tool engineering, metal processing, sheet steel processing, material 16 Mo3, Hardox, 1.4301, 1.4571, 1.4404, S355, S235, metal products, steel products, supplier construction machinery, power station, energy station, offshore equipment, pipes, steel halls, metal construction, profiles, handrails, balconies, stairs, roofing, pallet warehouse, pallet inverters, scrap conveyors, transport racks, special frames, devices, die blocks, barrel press, fork shoes, fork extensions, industrial gates, fences, customized constructions, industrial service, furnaces, playgrounds, sports fields, cladding, casing, housing, covers, noise-protection cabins, machine frames, large milled parts, conveyor technology, conveyor line, plunge pools, tank barrels and much more
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
Powerful derinding machine for large and small pieces of cheese. In addition to an ideal cutting width, the Weber Cheese Skinner offers product-specific height adjustment of the blade, meaning that natural and plastic rinds can be optimally removed. Maximum product yield is guaranteed. Advantages Powerful and with a compact footprint A special cheese transport roller and perfectly adjusted blades for optimal processing results Ideal cutting width for powerful derinding of large and small pieces of cheese Bolted blade with blade protection in cleaning position Unique geared brake motor with quick stop Options: special voltages
Request for a quoteKAUP GMBH & CO KG
Germany
KAUP attachments of the class T413 designed with high visibility are mainly used for in-plant, non-palletised transportation of bales of paper, waste paper, tobacco and textiles or also boxes and containers. Pulp, foamed plastic (polystyrene) wool and Big-Bags can also be transported with specially designed clamping arms.
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
The smart solution: Fully-automatic defatting machine ASD 460 enables removal of fat layers from loins and cutlets in predefined strengths. Advantages Fully-automatic recognition of the fat strength using Weber camera technology, with programmable controlled movementalong longitudinal profile Continuous work process Sensor-controlled electronic spring for perfect pressure application Uniform fat layers Considerable minimisation of reworking (trimming) Back bacon instead of small trimming cuts Clearly improved product image for cooking after slicing Product-specific blade holders Combinable with pre-installed derinder Options: Special Weber transport rollers Product-specific blade holders Product-specific pressure devices for products withand without bones Fixed or adjustable guide plates for supply and output belts
Request for a quoteCRAEMER GMBH
Germany
This Craemer original was specially designed for transporting ready mortar and is perfectioned for the daily handling at the construction site. Characteristics: — Made from flexible, breaking resistant PE, specially developed for the construction industry — High manufacturing quality — Stable frame — Solid anti-wear ribs protect the base from wearing through — Craneable thanks to sturdy handles — If used appropriately and serviced regularly, the German quality control authority TÜV attests the ready mortar skip a safe service life of five years Accessories: — Individual marking by own colour or labelling
Request for a quoteBEHA INNOVATION GMBH
Germany
Can Cables are specially designed for the transport of empty or filled cans on short or very long conveying distances. The belts are made of very hard PU or TPE raw materials and some also have a steel reinforcement.
Request for a quoteRIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
Feeding of filtered-out materials to silo systems over long distances (up to 700 m). Pneumatic medium-pressure conveyor systems For the conveying of filtered-out materials such as wooden splinters and wood dust or for the conveying of products in the derived timber products industry with large conveying quantities over great distances. Pneumatic medium-pressure conveyor systems are economical, reliable and enable flexible adaptations to individual conveying routes. The conveying air stream is generated by a rotary piston compressor. As opposed to fans, these have almost vertical characteristic curves; i.e. the volumetric flow rate remains almost constant as the pressure in the conveying system increases. This ensures safe material transport. Special cellular wheel sluices are necessary for channelling the conveying material into the conveying stream, such as knife gates for derived timber products. Cyclones, filters or combinations of the two are used to separate the conveying material from the conveying stream. The economical conveying lengths lie between around 150 and 750 m. The loading of the conveying stream can amount to up to 5 kg/m³ and essentially depends on the grain size, density and form of the material to be conveyed.
Request for a quoteRUHLAMAT GMBH
Germany
The LP2000 passport pre-personalisation machine automatically handles passports and e-passports in ICAO ID-3 size. Perforation laser, various numbering systems, and contactless chip encoding stations can be installed on the machine according to the specific project requirements. Thus a customised configuration with high level of flexibility and standardisation can be realised. A sophisticated double-step transportation mode allows parallel processing to reach a high throughput. Several software solutions create a high level of security and make operation very easy. Flexible, scalable design according to passport requirements Fully automatic handling of passports and e-passports Gentle passport booklet transport by special carriers Patented, space-saving chip encoding tower Laser perforation method (PERFLEX) Integration of customer specific technologies Easy integration into existing manufacturing setup Inline quality control Multiple Inline RFID chip controls (ATS, UID) Optional...
Request for a quoteFLÖTER VERPACKUNGS-SERVICE GMBH
Germany
The reliable AirWave standard film with 20µm is perfect e.g. as intermediate wrapper, crosswise wrapping and wrapper to protect your goods during transportation. Special print: Candy Backside: transparent 100% recyclable material 20μm wall thickness For heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.
Request for a quoteFLÖTER VERPACKUNGS-SERVICE GMBH
Germany
The reliable AirWave standard film with 20µm is perfect e.g. as intermediate wrapper, crosswise wrapping and wrapper to protect your goods during transportation. Special print: Stars Backside: transparent 100% recyclable material 20μm wall thickness For heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FLÖTER VERPACKUNGS-SERVICE GMBH
Germany
The reliable AirWave Bio film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. Special print: Green Christmas backside brown FSC® (C162510) certified Bio-compostable Paper weight 20g/m² Total thickness 50µ For light to very light goods Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 machine.
Request for a quoteFLÖTER VERPACKUNGS-SERVICE GMBH
Germany
The reliable AirWave Bio film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. Special print: Christmas tree backside is transparent 100% home compostable 20μm wall thickness Suitable for heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 machine.
Request for a quoteFLÖTER VERPACKUNGS-SERVICE GMBH
Germany
The reliable AirWave standard film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. Special print: Candy backside is transparent 100% recyclable material 20μm wall thickness Suitable for heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.
Request for a quoteFLÖTER VERPACKUNGS-SERVICE GMBH
Germany
The reliable AirWave standard film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. Special print: Stars backside is transparent 100% recyclable material 20μm wall thickness Suitable for heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
Light lever pulldown will connect the plug and socket without fail ready to flow liquid or gases. This Cupla complies with diversified applications in liquid or gas transportation. Endface seal structure enables no bumps or hollows on the internal fluid passage, and ensures smooth fluid transportation. “Special lip seal” adopted (except 3/4”, 1” sizes and silicon rubber seal) for light lever action and tight and sure sealing when connected. Connection part dimensions comply with US military specifications MILAA59326. The variety of body materials, sizes and end configurations has been standardized to comply with wide range of applications. Additional stopper function design will enhance safety (madetoorder product).
Request for a quoteEXCOR KORROSIONSSCHUTZ-TECHNOLOGIEN UND -PRODUKTE GMBH
Germany
As compared with conventional LDPE and HDPE films, multi-layer, diagonally laminated EXCOR VALENO X Film delivers extremely good strength properties. These make it ideal for multiple uses, while the ability to use both sides without having to worry about the effective direction provide additional operational security. EXCOR VALENO X Film is ideally suitable for packaging very bulky objects such as machinery, particularly if severe mechanical stresses are anticipated during transport. As single or multiple use packaging, VALENO X Film often comes in the form of covers specifically designed to fit the shape of the merchandise to be transported, complete with special closure and fastening accessories.
Request for a quoteVERFAHRENSTECHNIK HÜBERS GMBH
Germany
Impregnation systems to close micropores in metal castings as well as in copper, aluminium or magnesium alloy castings. The parts to be impregnated are fixed in baskets. The latter are transported by a special crane system as well as with reservoir roller conveyors. Excess material is removed by centrifuging of the baskets. The impregnating agent remaining in the pores in fluid form is hardened by heating in a hot water bath. The process sequence runs fully automatically under a microprocessor control.
Request for a quoteJOSEF JASPER GMBH & CO. KG
Germany
For standard size tanks a reliable transportation can be ensured by our own trucks with mounted hydraulic cranes. Special transports with extra wide loads, overlengths and large component heights are possible with our cooperate partners. Due to the near domestic port, apparatus of larger dimensions can be transported to the desired destination by ship. Our services include route planning, inclusive of obtaining the required permits and the hoisting gear needed for loading and unloading heavy components.
Request for a quoteIWIS ANTRIEBSSYSTEME GMBH & CO. KG
Germany
JWIS brand plate chains with special plates pressed directly onto the chain pins guarantee an absolutely flat, step-free transport track in the tightest of spaces. The iwis plate chain program includes roller chains according to standard ISO 606 (DIN 8187), ISO 1275 (DIN 8181) as well as works standard Highlights: • Guarantees an absolutely flat, step-free transport track • Low noise emission • Effective protection of functional areas of the chain • Intermeshing design of plates provides a continuous flat surface for workpiece transport • Special plate shape allows the construction of very tight bends • Long conveying distances possible in very small spaces • No risk of injury • DIN sprockets may be used • CAD data of all plate chain types available
Request for a quoteMODUS HIGH-TECH ELECTRONICS GMBH
Germany
The almost maintenance-free modusAOI MCS18/42-Inline was specially developed for transport conveyor modules in production lines. Existing lines can easily be retrofifitted with this system. The small, cost effective system comes with a 18 or 42 megapixels camera, control unit, modus software and led lighting inclusive controller. Characteristics: Single system for inspection of printed circuit boards from the top side. Combination of diverse application tasks such as SMD placement, pre-reflow, chip control, THT fitting, conformal coating and full screening for lost components. Reads barcodes and data-matrix codes in any position and quantity even on multi-PCBs.
Request for a quoteACHBERG SILOANLAGEN GMBH & CO. KG
Germany
Silos with a total height of upto 25 m and a diameter of 4.2 m are completely manufactured in the factory and transported by our specialized freight forwarders to installation site on time. Our qualified technicians carry out the mechanical and electrical installation. Afterwards we put the silo into operation.
Request for a quoteResults for
Special transport - Import exportNumber of results
29 ProductsCountries
Company type
Category