Special adhesives - Import export

Dispensing tool for industrial applications based on Meto ProLine. Perfectly suitable for processing of plastic labels (PP and PE) with special adhesive for difficult substrates like styrofoam. Label sizes 26 x 30 mm “roof shape” and 26 mm round. We recommend transparent PP labels and/or white PE labels with super permanent adhesive, but removable same time.

A clean solution that allows you to label your tires in an efficient and safe manner: The adhesive-free edge of the Bizerba tire labels minimizes the cleaning effort of your application devices. It ensures optimal adhesion even on the most difficult surfaces. Matching your needs the specifically developed quality label is printable by means of thermal transfer ribbon or ink-jet. Bizerba tire labels are the right solution - meeting the special requirements of your product in terms of labeling: We have developed a soft special adhesive with strong adhesion which safely sticks to very grooved rubber surfaces. In all weathers.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

Our special solution for labeling fresh, moist or greasy food: Manufactured from a material approved for food. Water and grease resistant properties and printable in thermal transfer process. Suiting your needs we realize your individual label in true Bizerba quality. Bizerba labels for direct food contact safely and reliably fulfil their function: Our ISEGA-tested solution can be safely applied to your fresh, moist or even greasy food. Bizerba offers you various solutions: For multicolored preprints, paper or film labels with a permanent, special acrylate-based adhesive can be used. Another alternative with particularly resistant properties is our polyethylene film-based synthetic paper label. It combines the print quality of coated paper with the robustness of a high performance film: The label is tearproof and resistant against water, grease and chemicals.

E-glass is the basic material for isoGLAS®. Texturing guarantees a large storage volume and thus good insulation properties. isoGLAS® products are extremely textile and harmless to health. Available dimension: width: 8 - 120 mm, thickness: 0,2 - 10 mm. Special version: one side self-adhesive.

S-Ply® is the registered name for composite leaf springs that are manufactured by Prause Durotec. The reinforcing material has a strictly parallel-oriented, non-interlaced glass or carbon fibre structure. The fibres are neither pre-stretched nor bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure.   Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesion to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all of the benefits offered by the raw materials selected to form the composite material.   The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress.  In addition, it has good load carrying and transmissio

  S-Ply® is a glass-fibre composite material that is suitable for the highest dynamic requirements. The load carrying and supporting material is a strictly parallel-orientated, non-woven, glass- or carbon-fibre laminate (UD-prepregnated).     The glass-fibres are not stretched and not bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesive to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all the benefits offered by the raw materials selected to form the composite material.  The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has g

It is possible to have square as well as round shapes, drilled holes and slots from Ø2 – Ø30 mm, with counter bores and tapped holes. To reduce stress concentration and shearing stress when mounting, we recommend the reinforcement of the clamping areas by fixing glass reinforced laminate (GHGW) plates. GHGW-reinforcement plates can be purchased loose or attached to the leaf spring. A special two-component adhesive is applied for the bonding. Following images indicate possible spring shapes:

The bearing assemblies are equipped with the S10 boot seal as standard. Temperature: –30 ° C to +80 ° C (NBR). Max. Peripheral speed: 5 m / s. For the sealing of the construction (e.g. when using a bearing element) the seal can be ordered by the meter. The joint is then glued with Loctite 401® adhesive. Special seals are available on request. Franke offers Viton seals for high temperatures or aggressive media.

The removable info frame for sensitive surfaces With special adhesive strips, DURAFRAME® WALLPAPER allows information to be displayed on wallpaper, wood and most plastics. Ideal for short-term use, after which the info frame can be removed again without leaving any residue and without damaging the surface.

The CUSTOMline hot melt machine is the top solution for customized casting requirements. It is configured specifically according to customer requirements and can handle complex casting tasks with exceptional precision and efficiency. This machine is ideal for special applications where standard solutions are not sufficient. With the CUSTOMline you get a casting machine that is tailored precisely to the specific needs of your production process in order to achieve optimal results. product [hot melt application systems, hot melt coating machines for paper, hot melt, hot melt adhesives, hot melt packaging, hot melt adhesives, special machines for adhesive processing, hot melts, machines for gluing, machine for gluing, melt casting technology with hot melt, hot melt coating, gluing machines, special machines for casting, sealing, foaming, gluing, special packaging machines]

In order to get started with low pressure molding technology, for prototyping new projects and producing small series, Labline offers a selection of small devices tailored to the requirements of low pressure molding technology. The basis here is the hand-held casting gun with a 0.2l tank for filling the casting materials in granulate form. In order to achieve process stability and reproducibility even with this manual processing, a timer can be connected. Two different clamping devices are available for convenient handling of sample and pre-series tools. product [hot melt application systems, hot melt coating machines for paper, hot melt, hot melt adhesive, hot melt adhesives, special machines for adhesive processing, hot melt packaging, machine for gluing, machines for gluing, hot melts, gluing machines, hot melt coating, gluing machines for labels, laboratory coating machines, systems for adhesive technology]

The control of the quantities of industrial liquids is an economic necessity considering the high value of these products. The volume measuring instruments required for this must be adjusted to the particular operating conditions and the characteristics of the materials to be measured both with respect to design and the materials used for these instruments. Oval Wheel Meters of the OI series meet all of these requirements. They are used for the measurement of liquid intermediate and finished products such as liquefied gases, acids, alkaline solutions, fats, alcohols, solvents, dispersions, polymers, polycondensates, paints, colours and adhesives etc. Special emphasis should be placed on the capability to measure liquids with very high viscosities (up to 1.000.000 mPa ·s) but with low pressure loss. The OI series of oval wheel meters assures a high degree of quality fort he products being manufactured due to the high measuring accuracy of the flow meters. Technical specification...

This two-component Special Adhesive is used to install anchorage devices in concrete and masonry. The cartridge contains 330 ml and is enough for around 10 applications. The required mixing nozzles are included in the package. Two-component Special Adhesive (330 ml) Specially designed for concrete and masonry Mixing nozzles included Suitable for our optional Cartridge applicator gun WIT

You can use this mesh sleeve to apply special adhesive when installing an anchorage device in a suspended ceiling or masonry with cavities. This metal mesh sleeve can be supplied with 3 different types of thread: M10, M16 and M22. Designed for suspended ceilings and masonry with cavities Available with 3 different types of thread: M10, M16 and M22

This easy-to-use cartridge applicator gun is used to apply our Special Adhesive WIT-VM 250. It lets you fill in the bore holes - after the dust and any other particles have been removed - with precision. Robust and durable Easy to use Suitable for applying Special Adhesive WIT-VM-250

The thread (M12) of this particularly robust stainless steel anchorage point is permanently installed in concrete using special adhesive. Once installed, it is suitable for all directions of load. You can install it on the ground, in a wall or overhead, depending on your individual needs. EN 795:2012, A Concrete ≥ C20/25 Recommended accessories: Special Adhesive WIT-VM-250

You can move freely all around this centrally-installed stainless steel anchorage point. It is equipped with a rotating anchorage eyelet - making it suitable for wall, ground, facade and overhead installation. The 80 mm thread (M16) is firmly cemented into concrete using special adhesive. National technical approval ("abZ"): Z-14.9-688 (max. 2 individuals) (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 (max. 3 individuals) EN 50308:2004 (max. 2 individuals) Freely rotating eyelet Concrete ≥ C20/25 Recommended accessories: Special Adhesive WIT-VM-250 Not suitable for recurrent abseiling usage when installed overhead!

This stainless steel anchorage point (Ø 16 mm) was specially developed with a larger base plate (370 x 370 mm) for installation in lightweight or porous concrete. The 8 anchor rods supplied in the package are cemented permanently into the concrete substructure using special adhesive. EN 795:2012, A + CEN/TS 16415:2013 Porous concrete ≥ P3.3 Add a supporting tube for usage as an end or corner post in a lifeline system Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

This stainless steel anchorage point (Ø 16 mm) is attached laterally to a concrete surface. It is reinforced by screwing on the supporting tube supplied (Ø 42 mm) - making it ideal for usage as a stronge support in a lifeline system. Our standard package includes 2 anchor rods and an angular plate - all made of stainless steel material. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Concrete ≥ C20/25 Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

Thanks to its angular bracket, this stainless steel anchorage point (Ø 16 mm) can be quickly and easily installed in a lateral position. The 2 anchor rods included in the package are permanently installed in the concrete subsurface using a special two-component adhesive. Once installed, this anchor is suitable for all directions of load. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation 2-hole system for flexible installation Concrete ≥ C20/25 Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

To ensure that your anchorage devices are securely installed in a concrete surface or masonry, the bore holes should be carefully cleaned prior to using special adhesive. This dust pump is designed to quickly remove any dust or residual particles that might cause problems from the bore holes. High capacity Air chamber length: 42 cm

Use this stainless steel hook device, which is firmly anchored to your building structure, to secure your ladder and prevent it from slipping and tipping. Attach it permanently to a wall or facade. Depending on your requirements, it can be screwed on, dowelled on or cemented into place using special adhesive. For fixing to a facade Ladder safety device for indoor and outdoor usage Prevents slipping and tipping Designed for rungs at least 280 mm wide Installation to be carried out using suitable installation materials depending on the surface (not included)

This stainless steel anchorage point (Ø 16 mm) - designed to secure individuals - has been certified by the German Institute for Construction Technology (DIBt). It is installed in concrete using two-component adhesive and is suitable for installation on a roof surface or facade - on the ground, in a wall or overhead. National technical approval ("abZ"): Z-14.9-688 (pls. observe the provisions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 Concrete ≥ C20/25 Recommended accessories: Special adhesive WIT-VM-250 Important: When the device protudes ≥ 100mm above the subsurface in a wall/facade lifeline system (corner or end support), an additional supporting tube is required

This reinforced, stainless steel anchorage point - designed for concrete applications - does not create any tension in the substructure and is suitable for unprotected surfaces. It includes a base plate (150 x 150 mm) and a welded-on supporting tube (Ø 42 mm) for extra stability and is installed using the 4 anchor rods supplied. All you need is an installation depth of a mere 60 mm. EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Concrete ≥ C20/25 For installation depths ≥ 60mm Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

High temperatur sheet gasket from expanded graphite with stainless steel foil reinforcement Characteristics One layer of 0.05 mm stainless steel carrier (3 mm thickness 2 layers) with graphite on both sides fixed by a special only 10 µm thick adhesive coating. Purity 98 % Practically no cold flow or creep under temperature Excellent in use at cycling temperatures Very good sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Suitable for sensitive flange connections Housings of pumps and fittings Suitable for In all industries Approvals BAM DVGW Variant Economic grade alternative D 5.2 with 0.05 mm stainless steel foil reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in der Dicke 0.55 / 0.75 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

A specialized product that was developed for installing ignition elements and insulating them from the environment. Expansion of the inner diameter is also possible with longer components. For embedding other components, special gas and water-proof adhesives are available, which also retain their properties at high temperatures.

Light-colored piston lubricant with special additives for better adhesion and lubricating properties Type viscous oil Appearence light-coloured Properties and Advantages • increased service life of piston and shot sleeve • economical in use • reduced smoke and gas development

It is now possible to manufacture removable labels eben for critical surfaces without any compromises regarding visual and physical durability. For that purpose, HERMA has developed a special range of adhesives that is suitable for many substrates. It allows labels to reliably perform their task, after which they can be easily removed.