Resins - Import export

Together with the Fachhochschule Münster – University of Applied Sciences we are working on ALWA PERM (patent No. 2583995). This is a metal-filled casting resin for producing a porous, resin-bound mould. These materials are applicable in the areas of thermoforming, the ceramic industry, intake moulds and devices, pneumatic cushioning, the filter industry, etc. ALWA PERM allows a castable production of porous metallic materials with a binder for the first time. The system offers a highly accurate mould surface reproduction. The profile characteristics goes far beyond the current state of the art. NO MORE DRILLING OF VACUUM HOLES! NO DAMAGE OF THE MOULD SURFACE DUE TO DRILLING HOLES

The PSG/553/RAC cable gland is an Ex d barrier cable gland for armoured and non-armoured elastomer and plastic insulated cables. The new series uses an innovative diaphragm sealing concept to seal the individual cores, so that there is no need to use compound or liquid resin. Available materials: Brass, Nickel plated brass, Stainless Steel 1.4404, V4A, 316L, Aluminum Types of Protection: Ex db IIC Gb, Ex eb IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. Explosion-proof acc to ATEX/IECEx Protection grades: IP66, IP67, IP68 (30 metres for 7 days), IP69, Deluge Protected DTS01, NEMA 4X

The Systems comprise the entire casting process: Preparation of the material components resin and hardener (conveying, homogenization, degassing), production of the reactive mix and casting of the parts under vacuum/atmosphere. Any resin system can be processed, also with strongly disproportional mixing ratios.

ALWA EPT 210 is a laminate and backfilling resin. Laminates can be produced with ALWA EPT 210 in order to manufacture glass fibre plastic parts, gauges, templates, moulds and applications with diverse fillers. ALWA EPT 210 is an epoxy resin that has a low viscosity and a light yellow colour. Under exothermic reaction, it cures in connection with the light yellow hardener H 10 at room temperature. The mixture shows a low viscosity and is particularly appropriate for laminating layers of up to 8 mm. For thicker laminates the application of layers must be interrupted several times in order to avoid too high reaction temperatures in the laminate.

ALWA EPF 10 is a temperature-resistant, steel-filled gelcoat based on epoxy resin. It is used to produce temperature and abrasion resistant surfaces for vacuum, PU foam, thermionic moulds and heating plates, among others.

Dymax GA201 forminplace (FIP)/cureinplace (CIP) gasketing resin is formulated for sealing plastic, glass and metal enclosures, and plated surfaces for automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, tackfree, flexible gasket. Features: - Cures with UV/Visible light - Moisture resistant - Chemical resistant - Tackfree cure - Soft, durable after complete cure - Conforms to intricate channels and recesses - Compliant with RoHS directives 2015/863/EU

Dymax GA140 forminplace (FIP) and cureinplace (CIP) gasketing resin is formulated for fuel cell, automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, tackfree, lowoutgassing, flexible gasket with compression set. Features: - Cures with UV/Visible light - Low outgassing - Cures soft and tack free - Excellent tear resistance - Clear in color - Cures in seconds - Silicone free - Conforms to intricate channels or recesses - Compliant with with RoHS directives 2015/863/EU

Gronbach manufactures decorative elements for the automotive industry in interior and exterior areas such as trim strips or trim parts made of aluminium, stainless steel and plastic hybrid technology. Functional components and plastic injection molded parts with a focus on fan wheels and turbines are also essential components of our technologies. As a specialist for surface finishing, you have a wide range of colours (anodising, powder coating), noble shapes and surfaces (brushing, grinding, polishing, blasting) and high-quality individualisation (screen printing, pad printing, under-anodising printing, laser engraving, etching techniques) at your disposal. In addition to the production of individual parts and the manufacture of complex assemblies as well as end products, we also offer you as a system supplier the complete project planning for new developments. Our portfolio includes: Automotive door sills Interior visible parts, e.g. side applications, decorative panels and...

The STRATE AWALIFT 1/2x2 is used in many applications that require small quantities of waste water to overcome a high discharge head. With a capacity of 15 m3/h, the system is suitable for up to 750 EW. The system can be adapted to your individual needs through the use of different motor variations. Drainage of small towns with up to about 750 residents that cannot be drained using natural gradient. Drainage with larger pumping heads and longer pressure pipes As an intermediate pumping station within a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features The tank with two separator systems Four centrifugal pumps ST (M)65/80, motors according to type and operating location required Four pump gate valves One Y-pipe Two STRATE non-return valves Two gate valves Level measurement LGA certified according to DIN EN 12050-1 /. -4

Especially by our research and development work we have succeeded in creating various permanent anti-sticking coating systems. The distinctive deep-drawing properties paired with thermal resistance allow it to be used in a wide range of applications. From façade coating and device covers in industrial engineering to household products, such as sliding surfaces for shavers. There are hardly any limits for our application possibilities.

We find decorative coatings wherever an attractive or optically effective surface is required. Examples include the construction sector (interior and exterior), office organisation, interior decoration, reflectors, veterinary medicine, labels, roof construction and other niche segments.

Whether highly opaque dispersion paint or diffusion-open silicate paint, synthetic resin lacquers or epoxy resin primers, our experienced employees develop suitable solutions and are at your side with help and advice.

ALWA MOULD SLV is a universal two-component fast casting PU resin for mould making. It is used for the production of milling devices, negatives, product holders, foundry moulds, mould plates, copy moulds, core boxes, pattern plates, casting moulds, prototype parts, supporting moulds and synthetic cast. It consists of a beige-brown low viscosity resin component A (polyol mixture) and a red-brown, low viscosity hardener (component B) based on isocyanate (Methylendi(phenylisocyanat)e = MDI). Two types are available with different pot life: *ALWA MOULD SLV 3 ~ 3 min. pot life *ALWA MOULD SLV 9 ~ 9 min. pot life

ALWA BARRIER COAT is a laminate resin, which is applied to protect the gelcoat for instance with glass fleece (e.g., ALWA MOULD COAT and ALWA UP GELCOAT).

ALWA UP GELCOAT is an aluminium filled polyester surface resin with a temperature resistance of 110 °C. Pot life is approx. 20 – 30 min. at room temperature, when using 1 – 2 % hardener (art. no. 3150001). The top layer can be polished to high gloss.

ALWA MOULD COAT is a vinylester resin and is used for surfaces of RTM, polyester and laminate moulds.

ALWA HT RESIN is a resin-based on isocyanate and epoxy (EP), which reacts after adding a catalyst. ALWA HT RESIN offers a range of possibilities for producers of fibre-reinforced materials (e.g., glass fibre, kevlar and carbon), semi-finished and finished goods. The system is also suitable for prepreg and reaction compounds. ALWA HT RESIN is particularly interesting for the aerospace and aircraft industry as well for the rail transport, automotive and electronics industry. The application area of epic resins are electro casting resins, lamination and injection technology (RTM procedure), vacuum infusion, casting and ramming compounds, impregnation resin, casting and injection moulding process as well as prepreg technologies, among others. ALWA HT RESIN is offered in two versions. *ALWA HT RESIN M100 with approx. 50 mPa s *ALWA HT RESIN M2200 with approx. 2200 mPa s The resins can be mixed with one another which enables a flexible adjustment of the viscosity.

ALWA MOULD P is a cold curing casting resin for the production of porous moulds, slabs and blocks for the ceramic industry. It is a porous and high-strength plastic, which is well-suited for high pressure casting applications. ALWA MOULD P can be used in various areas of the tableware and sanitary ceramics, technical ceramics, plastic mould procedure as well as various filtration processes. The high stability and defined porosity of the material allows highly accurate mould surface reproductions. With ALWA MOULD P various geometric moulds for filtration processes of suspensions can be produced. ALWA MOULD P can be used for ceramic slip pressure casting procedures. In this procedure, water is removed by a filtration process of a clay suspension (slip), so that an increasing clay layer is built on the mould wall over time. The moulds, slabs and blocks of ALWA MOULD P are easily machinable (e.g., drilling, milling).

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

The B70H is a modification of our B70V and is designed for horizontal use on a transport trolley. It can be used in situations where the B70V comes up against spatial or handling limits and thus rounds off our Eccentric screw pumps with a mobile variant. The pump is suitable for pumping aqueous to highly viscous Newtonian and non- Newtonian media as well as media containing solids and shear-sensitive media. It is also used in explosion-proof zones for aggressive and highly flammable liquids with high delivery pressure. * also available in explosion-proof design on request * Horizontal version * with stainless steel transport trolley Features & Advantages * Conveying possible at low room height * No physical strain due to heavy lifting * Mobility is given by the transport trolley * Simple size change possible * Easy handling of pumps with large weights

The patented casting resin system ALWA MOULD D consists of two resin components and an aluminium filler. The fast curing of the material allows to produce your own technologically highest quality moulds in just a few hours. As our material is very good castable, compact moulds of any desired volume can be made from our product, such as acrylic baths, boats, etc. (<1 kg – 2500 kg). In comparison to other materials (e.g., glass fibre reinforced plastic), the system is more temperature-resistant, allows castings without air bubbles and does not have to be post-cured. Furthermore, the finished mould is easy machinable (e.g., drilling, milling, grinding, planning, sawing, turning, etc.). ALWA MOULD D moulds can be modified with repair filler, so that a fresh view can be created at an early stage of a new design process and prototypes can be examined at short notice.