Reinforcement - Import export

Round copper wire made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys, in bare, tin-plated, nickel-plated and silver-plated, soft annealed. Single wire diameter ranging from Ø 0.05 mm to Ø 0.254 mm. Number of wires used for strands: between 2 and 16 (subject to single-wire diameter). Single wire or multi wire on special bobbins fit for use in braiding machines. The braids manufactured by these machines are used in cables and conductors geared towards electromagnetic shielding or protection against damage as well as serving as a reinforcement.

The pressure regulator type 8042 in reinforced version is a smart combination of a pilot pressure regulator with a sliding gate control valve and is excellently suited for gases and vapors. The pressure regulator, which operates with auxiliary pneumatic energy, is characterized by highest dynamics and control quality. External or manual set point adjustment completes the compact and simple design of the valve and regulator.

The core of the technology is the automated welding process, where the tank is simultaneously welded on the inside and the outside. Similar to the Lipp double fold technology the material will be pre formed by Lipp special forming machines and reinforcement ribs are applied for additional stability. By doing so, the wall thickness can be reduced which will have an economic effect on the overall material costs, without compromising structural stability. The process also enables the installation of roofs and other accessories at ground level, which reduces the risk of working at heights. The main application for the new Lipp welding technology is the drinking water sector. However, there is lots of market potential in the food and beverage industry, chemicals and pharmaceuticals as well as other industries. The black steel welding technology enables the installation of bulk silos with huge diameters and volumes, which is a significant improvement compared to today.

We produce blanks from plastic in line with your specifications. Upon your request, we also process pellets specified and also provided by you in our injection molding department. We keep a wide range of common plastic grades in stock, which we process into test specimens of various sizes according to your specifications. On request we also procure special materials and process these in line with your specific requirements. We process every available type of pellets to form DIN A5 format sheets or smaller sheets lap shear test specimens 100 x 25 x 3 mm dumbbell test specimens We deliver various surface finishes structured high-gloss automotive graining used by a wide range of car manufacturers We deliver every SMC quality depending on the availability of prepregs with class-A finish also in automotive quality Types of plastics ABS, PC, PE, PMMA, POM, PP, PS, PVC, PET, PTFE, PA6, PA6.6, PU, Polymer-based glass fiber-reinforced plastics

Composite Bearings

Composite Bearings

Composite Bearing

PTFE Thrust Washer

Bags with euroslot reinforcement can be used even for heavy weights. The packaging is open at the end of the bag, with a crosswise sealing underneath the euroslot. With its extremely rigid header, the bag becomes strong and suitable also for heavy weight contents. Several hanging slots spread the load over a larger area. We would be pleased to give you advice about our euroslot bags. We look forward to your inquiry by mail or by phone: +49 (0)9181/2960-0!

The sliding gate manual valve type 8050 in reinforced design and long construction is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

Support sleeves for reinforcing plastic components. Made of stainless steel with customised design. The bushings can be produced not only round but also oval as a deep-drawn part.

Oil hoses in inch and dash sizes. With or without stainless steel coating for normal and high temperature applications.

Composite PTFE Bearing

with PTFE Tape Liner

with PTFE Tape Liner

Composite Bearing

Simply as a replacement for steel! Plastic does not corrode and is much less costly than steel when ordered in large batches. Glass fibre reinforcement makes the plastic tough and loadbearing. Upon request, we can check whether your steel or stainless steel parts can be replaced by glass fibre-reinforced polyamides or polyurethanes at lower cost. Threads and internal threads are also possible, also steel inlays. It just depends on the batch size.

Easy installation through wide opening Excellent loading capacity Wide grip range for all types of pipes We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Robust and economic plastic handwheel. Various sizes. Hub made of zinc-coated steel for high stability and easy shaft mounting. Various hub versions. With thread for mounting a turning handle (see accessories).

High performance pipe clamp for plumbing, ventilation, air conditioning and industrial application Excellent loading capacity Easy installation through wide opening High performance noise and vibration absorption Precise fitting for every pipe We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Westfälsche Drahtindustrie GmbH uses highly efficient plant technology at its Salzgitter site to produce cold-ribbed reinforcing steel (CR) in rings and coils, as well as structural steel mesh. Thanks to special wire rod primary material for our CR products, which we have developed in close cooperation with our suppliers, our reinforcing wire achieves first-class technical values, particularly in terms of elongation and the Re/Rm ratio The advantages for the user: easy processing and dimensional accuracy of the hangers. Seamless quality monitoring from the wire rod to the finished product by our own quality centre and our external monitoring centre (MPA Dortmund) guarantees the highest level of lasting quality and safety.

• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened

Steel mesh constructions from WDM Deutenberg save stability of your construction plans from the inside. Our reinforcement meshes are greatly proven, e.g. for aerated concrete, reinforced concrete or floor fill concrete.

These insulating cases combine electrical insulation with high mechanical strength. As they are resistant to electrolytic corrosion, they are essential for connections between incompatible metals. Material: PA-glass fibre reinforced Colour: black Colour white on written request.

The Metzner CCM 2 circular cutting machine processes steel-reinforced profiles and sponge rubber materials with dry cutting (optionally with micro-knife moistening to cool the circular knife). The standard model comes with an integrated discharge conveyor (1300 mm length); range of application both in-line and off-line.

Upgrade your ABS-Lock X anchorage point for usage as a corner or end support in a lifeline system. This additional stainless steel reinforcement (Ø 42 mm) includes an energy absorber and is capable of withstanding the pre-tensioning load exerted on your stainless steel cable. Supporting tube for Ø 16 mm posts Designed for usage as a corner or end support in a lifeline system Includes an energy absorber

Use this system to test the load-bearing capacity of the subsurface when conducting the annual inspections of your ABS-Lock OnTop fall arrest device for bitumen and fabric-reinforced plastic membranes. The set consists of 2 circular, stainless steel testing units. For testing the subsurface Suitable for bitumen and fabric-reinforced roof membranes

Simply install this high-quality guard rail, which is made of aluminium and stainless steel, on a bitumen or fabric-reinforced plastic membrane - completely penetration-free. The guard rail is 1100 mm high (handrail) and is suitable for roof pitches of up to 10°. EN 13374:2013, A Designed for flat roofs with a pitch of maximum 10° Handrail height: 1100 mm Distance between the posts: Max. 2.50 m Weight per post: Approx. 3 kg (traditional posts: 30 kg) Bitumen patches are included in the package PVC patches need to be provided and cut to size onsite

Install this stainless steel anchorage point (Ø 16 mm) - specially-designed for flat roofs (max. 10° pitch) - on bitumen or fabric-reinforced plastic sheeting without penetrating your roof surface - and without the need for extra weights. The crossbars, which are made of high-quality, lightweight aluminium, ensure that the force is reliably distributed whilst keeping the weight down. Meets the requirements of EN 795:2012, A + CEN/TS 16415:2013 Designed for flat roofs with a pitch of up to 10° Min. 15 m² roof space required Fused to a bitumen/fabric-reinforced plastic membrane Penetration-free installation - no extra weights required