Protective unit - Import export

The PLUS SYSTEM series of linear actuators consists of highly protected linear units featuring a self-sustaining anodized aluminum structure and a steel re-enforced driving belt. This is a line of exceptionally sturdy and high performance actuators in terms of load, moment control, speed and acceleration. High load capacity,High speed,Low wear and tear,Low friction,Low maintenance.Corrosion resistant version All Plus System series of linear actuators are available with stainless steel elements, for applications in harsh environments and/or subject to frequent washes. The Plus System linear units are made by using extruded anodized Anricorodal 6060 and 6082 aluminum, which houses bearings, linear rails, nuts and bolts and components made of low carbon SS AISI 303 and 404C steel, preventing or delaying corrosion caused by humidity experienced in the environments where the linear units are used.The PLUS SYSTEM series consists of 3 distinct products with different features: ELM,Robot,SC.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

Energy column/power bollard ES401 on a foundation created on site for indoor and outdoor use. The housing is made of stainless steel, the sockets are secured with 2-pole FI/LS and wired ready for connection. The degree of protection is IP44 (electrical units). Other equipment variants on request.

Socket pillar or power bollard ES323 for outdoor use on a foundation created on site. The housing and base are made of solid, glass bead blasted stainless steel. The device plate is also made of stainless steel and is unwired. Degree of protection IP44 (electrical units). Other equipment variants on request.

ES321 socket pillar/power bollard for outdoor use on an on-site foundation. The housing and base are made of solid, glass bead blasted stainless steel. The device plate is also made of stainless steel and is unwired. Degree of protection IP44 (electrical units). Other equipment variants on request

The products get transferred in a continuous-flow process. Products go through the scanner where the mass allocation of each product is determined using X-ray technology. The products are then weighed on the integrated weighing station according to their individual track. The system features a two-stage safety guarding for its radiation source. The CPS-X 400 is specifically designed for weight-accurate slicing of speciality products like Swiss Cheese and those which vary in density, e.g. fat to lean ratio. Optional: Detection of foreign objects: as well as ensuring reliable production, detecting foreign objects also protects units located downstream. This function can be used for detecting, e. g. stainless steel > Ø = 3 mm, glass/ceramic > Ø = 8 mm (product-dependent). Advantages Up to six products in one scan cycle Weight-precise cutting of cheese with holes Density determination of products with significant density differences (fat/lean proportion)

Mould parting agent for entire range of plastics processing if an adhesion-dependent further processing requiring silicone-free parting agent is carried out Welding parting agent for arc welding and inert-gas arc welding As nozzle spray for extended service life of welding nozzle and keeping nozzle opening clear on automatic welding units As workpiece protection against baking and burning on of weld spatters Advantages and benefits Silicone free release agent with high effective substances from renewable primary products Prevents from burning in of spatters at welding nozzles, on workpieces and robots and increases the lifetime of the welding torch Builts up an evenly thin, nearly dry film, no creation of pores Enables the fast change and cleaning of the welding nozzle Easily washable with OKS 2650 Additional painting, metallising and printing after prior degreasing without any difficulties possible

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air

Safe upending (90°) and rotating (180°) of coils Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type highstrength chain Rotating drive via welded surfacehardened sprocket, integrated in base Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Safe upending of coils (90°) Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type Highstrength chain Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models...

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models...

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models...

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models...

The key to successful power generation through wind is efficiency, and industrial aluminum is playing a key role in making wind turbines lighter. Working together with our partners, we’ve created a smaller, lighter tower casing behind the rotor blades, as well as an innovative aluminum enclosure for the turbine’s generator that is lighter and more efficient than fiberglass composite housings used previously. This housing reduces fire risk thanks to aluminum’s incombustibility and helps cool the generator due to aluminum’s thermal conductivity, extending the aluminum enclosure’s functional life. It also maximizes the unit’s recyclability and protects the generator from lightning, since the aluminum acts as a Faraday cage and is non-combustible in the event of a lightning strike.

Mould parting agent for entire range of plastics processing if an adhesion-dependent further processing requiring silicone-free parting agent is carried out Welding parting agent for arc welding and inert-gas arc welding As nozzle spray for extended service life of welding nozzle and keeping nozzle opening clear on automatic welding units As workpiece protection against baking and burning on of weld spatters Advantages and benefits Silicone free release agent with high effective substances from renewable primary products Prevents from burning in of spatters at welding nozzles, on workpieces and robots and increases the lifetime of the welding torch Builts up an evenly thin, nearly dry film, no creation of pores Enables the fast change and cleaning of the welding nozzle Easily washable with OKS 2650 Additional painting, metallising and printing after prior degreasing without any difficulties possible

Energy column/energy bollard EST24 for outdoor use on a foundation created on site. The case is made of brushed stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and fully wired. The energy column can be locked with a profile half cylinder. The degree of protection of the electrical units is IP44. Optional interior lighting selectable. Other equipment variants on request.

Power bollard ESP24 for outdoors, protection class: housing IP10, electr. Units IP44. The housing is made of 2 mm glass bead blasted stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and completely wired. The power bollard can be closed with a profile half cylinder. Thanks to the cable outlet, the door of the power bollard can also be locked when it is in use. Coatings in RAL colors are also possible on request! The equipment is variable.

The combination of a steam protector and a collecting tray is a valuable addition to any eye-level dishwasher. The steam protection strip shields the unit carcase against the steam escaping from the dishwasher when the appliance door is opened. The collecting tray fits flush with the carcase sides so that any dirt or condensation water underneath the dishwasher can be collected. Fitting is carried out without any additional tools using double-sided sticky tape.

Single-stage rotary vane pumps from Pfeiffer Vacuum have long been some of the most widely used products for processes in the low and medium vacuum range. Their long life and pumping speed, irrespective of the gas used, are the outstanding properties of this pump. Typical applications are found in widely ranging sectors: — Analytics (mass spectrometry, electron microscopy) — Coating technology (surface protection, decorative films, display units, monitor screens) — Vacuum metallurgy (vacuum soldering, vacuum sintering, vacuum alloys, furnace construction) — Leak detection technology (vacuum systems, automotive tanks, airbag cartridges, packaging) — Lighting industry (light bulb manufacture) — Drying industry (vacuum drying, transformer drying)

Wall distributor 5723E with 5 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The flush-mounted wall distributor 5723E is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5722E with 4 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of Sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The 5722E flush-mounted wall distributor is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost

Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.