Protective unit - Import export

The PLUS SYSTEM series of linear actuators consists of highly protected linear units featuring a self-sustaining anodized aluminum structure and a steel re-enforced driving belt. This is a line of exceptionally sturdy and high performance actuators in terms of load, moment control, speed and acceleration. High load capacity,High speed,Low wear and tear,Low friction,Low maintenance.Corrosion resistant version All Plus System series of linear actuators are available with stainless steel elements, for applications in harsh environments and/or subject to frequent washes. The Plus System linear units are made by using extruded anodized Anricorodal 6060 and 6082 aluminum, which houses bearings, linear rails, nuts and bolts and components made of low carbon SS AISI 303 and 404C steel, preventing or delaying corrosion caused by humidity experienced in the environments where the linear units are used.The PLUS SYSTEM series consists of 3 distinct products with different features: ELM,Robot,SC.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

Energy column/power bollard ES401 on a foundation created on site for indoor and outdoor use. The housing is made of stainless steel, the sockets are secured with 2-pole FI/LS and wired ready for connection. The degree of protection is IP44 (electrical units). Other equipment variants on request.

Socket pillar or power bollard ES323 for outdoor use on a foundation created on site. The housing and base are made of solid, glass bead blasted stainless steel. The device plate is also made of stainless steel and is unwired. Degree of protection IP44 (electrical units). Other equipment variants on request.

ES321 socket pillar/power bollard for outdoor use on an on-site foundation. The housing and base are made of solid, glass bead blasted stainless steel. The device plate is also made of stainless steel and is unwired. Degree of protection IP44 (electrical units). Other equipment variants on request

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air

Safe upending (90°) and rotating (180°) of coils Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type highstrength chain Rotating drive via welded surfacehardened sprocket, integrated in base Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Safe upending of coils (90°) Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type Highstrength chain Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

The combination of a steam protector and a collecting tray is a valuable addition to any eye-level dishwasher. The steam protection strip shields the unit carcase against the steam escaping from the dishwasher when the appliance door is opened. The collecting tray fits flush with the carcase sides so that any dirt or condensation water underneath the dishwasher can be collected. Fitting is carried out without any additional tools using double-sided sticky tape.

The key to successful power generation through wind is efficiency, and industrial aluminum is playing a key role in making wind turbines lighter. Working together with our partners, we’ve created a smaller, lighter tower casing behind the rotor blades, as well as an innovative aluminum enclosure for the turbine’s generator that is lighter and more efficient than fiberglass composite housings used previously. This housing reduces fire risk thanks to aluminum’s incombustibility and helps cool the generator due to aluminum’s thermal conductivity, extending the aluminum enclosure’s functional life. It also maximizes the unit’s recyclability and protects the generator from lightning, since the aluminum acts as a Faraday cage and is non-combustible in the event of a lightning strike.

Energy column/energy bollard EST24 for outdoor use on a foundation created on site. The case is made of brushed stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and fully wired. The energy column can be locked with a profile half cylinder. The degree of protection of the electrical units is IP44. Optional interior lighting selectable. Other equipment variants on request.

Power bollard ESP24 for outdoors, protection class: housing IP10, electr. Units IP44. The housing is made of 2 mm glass bead blasted stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and completely wired. The power bollard can be closed with a profile half cylinder. Thanks to the cable outlet, the door of the power bollard can also be locked when it is in use. Coatings in RAL colors are also possible on request! The equipment is variable.

The combination of a steam protector and a collecting tray is a valuable addition to any eye-level dishwasher. The steam protection strip shields the unit carcase against the steam escaping from the dishwasher when the appliance door is opened. The collecting tray fits flush with the carcase sides so that any dirt or condensation water underneath the dishwasher can be collected. Fitting is carried out without any additional tools using double-sided sticky tape.

Wall distributor 5723E with 5 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The flush-mounted wall distributor 5723E is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost

Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor with 2 slots, splash-proof. Degree of protection IP44 (electrical units). The housing is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. The cover also closes in straight or angled form when standard plugs are inserted. Ideal for sports halls: tested, unrestricted ball throwing safety in accordance with DIN 18032-3: 1997-04. Further equipment variants and colors on request.

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages Two gun connection for stud welding guns

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Fully controlled power source with thyristor bridge For threaded studs up to 8 mm Designed for welding on building sits Self-diagnosis: Overheating and mains phase failure, short circuit control, malfunction of pilot arc Microprocessor controlled Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Stud counter: standard

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages