Protective pipe - Import export

This „three parter“ is available in all dimensions from 50 - 300 mm. The PVC forwarding tube in your specified size is embedded in PU foam sheathing and additionally protected by a rugged corrugated PEHD pipe. The PVC underground tube is also available with a smooth outer tube.

This „three parter“ is available in all dimensions from 50 - 300 mm. The PVC forwarding tube in your specified size is embedded in PU foam sheathing and additionally protected by a rugged corrugated PEHD pipe. The PVC underground tube is also available with a smooth outer tube.

Self-adhesive, flexible pipe protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible pipe protection profile made of polyurethane foam. • For indoor use only • Suitable for pipes or cables with a diameter of 20 mm - 40 mm that are placed near walkways for structural reasons. • Ideal for use in manufacturing, shipping department and warehousing, stairwells or in confined areas such as basements or garages with low passageways, etc. • Marks danger spots, protects pipes and lines and mitigates impact injuries. • Profiles can be shortened to the desired length with a sharp cutter knife • Colour according to ASR A1.3 similar to RAL 1004/9003 (signal yellow/signal black) • Fire test according to DIN EN 13501-1 class E • Temperature resistant from -30°C - + 70°C • Profile length: 1 m • Inner diameter: 30 mm

Crossing of traffic routes and waterways in pipeline construction HDD Assist & Rescue Installation of protection pipes Dynamic pipe bursting Vertical applications Construction of circular support structures for tunnelling Tree relocation

Heat protection and fire protection for pipes and hoses. Also available as mats or rolls for surfaces

Protection of pipes and channels in the whole range of air-conditioning and ventilation technology In the cladding and metal construction, e.g. at railings, bridge parts or supports Advantages and benefits High efficiency through excellent adhesive properties and high resistance of the cured film to impact and scratches Best use as decoration layer of all metallic sur Economically due to low consumption and self-cleaning valve

Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.

Find out more of our corner, edge, pipe and surface protection.

The pressure relief valves GEMÜ N085 and N185 protect the plant and the piping system against gauge pressure and reduces pressure peaks. The third pipe spigot enables the valve to be installed in the main pipe. If the pressure increases, the spring is raised and the valve opens. The pressure is reduced to the preset value and can escape via the third pipe spigot into an adjacent pipe. If the pressure falls, the spring force presses the diaphragm in the direction of the seal seat and it is closed. The spring force can be adjusted as required using a set screw. - Valve adjustments can also be made under working pressure. - The optimization of piston, springs and control face ensures good control characteristics - The actuator is hermetically separated from the medium

The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O — accuracy: 0.1 % — diameter 39.5 mm — cable and sensor section separable — HART®-communication (setting of offset. span and damping) — permissible temperatures up to 85 °C — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm (AI2O3 99.9 %) — accessories e.g. mounting flange with cable gland and terminal clamp

The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 39.5 mm — cable and sensor section separable — especially for sewage, viscous and pasty media Optional Features: — IS-protection Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm pure ceramic (99.9 % AI2O3) — different kinds of cable — different kinds of elastomeres

Specially designed for working on mobile elevating work platforms (in accordance with CNB/P 11.074), this lanyard is based on a robust strap and includes an integrated energy absorber, a carabiner hook for attaching the lanyard to your personal protection kit and a pipe hook. Is it 1.8 m long and can be flexibly adjusted. For individuals weighing up to 140 kg. EN 354:2010 & EN 355:2002 CNB/P 11.074 (for implementation on a mobile elevating work platform) Adjustable length: 1.4 m - max. 1.8 m Max. 140 kg (incl. the user's clothes and equipment!)

For installation into pipes to the protection of vessels and components against deflagration of flammable liquids and gases. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The distance between a potential ignition source and the flame arrester must not exceed 50 times the inner pipe diameter. The installation of the Deflagration flame arrester into horizontal and vertical pipes is permissible. When equipped with one or two temperature sensors, the devices are protected under atmospheric conditions against a short time burning by a burning time tBT = 1.0 min. If only one temperature sensor, then it is to be placed on the device side where a burning could be expected.

For installation into pipes to protect containers and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Working unidirectional in pipes, whereby an operating pressure of 1.2 bar abs. and an maximum operating temperature of 60 °C must not be exceeded. Provided with one temperature sensor (PT 100) the armature is certified against short time burning from one side. The installation is not dependent on the position and both directions of flow are possible. During installation, please observe the direction of detonation and the indication „protected side“.

For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The installation of the detonation flame arrester into horizontal and vertical pipes is permissible. Provided with one or two temperature sensors (PT 100) the armature is certified against short time burning from one or both sides. If only one thermal sensor is attached, it must be installed into that part of the body from which a fire is expected.

For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. All sizes are tested against “stabilized burning” and withstand this up to a max. burn time BT ≤ 30.0 min. To detect a “stabilized burning” a temperature sensor must be installed at each endangered side. Mounting is acceptable in any position, in horizontal as well as in vertical pipes.

For installation into pipes to the protection of vessels and components against deflagration of flammable liquids and gases. Approved for all substances of explosion group IIA1 (old: I) with a maximum experimental safe gap (MESG) ≥ 1.14 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The distance between a potential ignition source and the flame arrester must not exceed 50 times the inner pipe diameter. An installation into horizontal and vertical pipes is permissible. To detect a thermal load on the KITO® flame arrester element in operation a temperature sensor can be implemented as an option into the flame arrester body. Proof against “stabilized burning” and withstand this up to a max. burn time BT = 1.0 min.

Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Cable conduits made of PP with plug-in sleeve Manufactured acc. to DIN 16878 or prEN 14285 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Cable conduits made of PVC-U with plug-in sleeve Manufactured acc. to DIN 16875 Standard design: Sleeve type: plug-in sleeve Sealing ring: inserted in the factory Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black/anthracite Possible designs: Länge: 1 m to 6 m Farbe: special colours are available on request Labelling: acc. to customer specifications

Cable protection tubes for industry with different properties: With our corrugated tubes, threaded tubes, protective hoses and connection fittings, you are well equipped for all eventualities. They easily withstand both low and high temperatures and also have excellent fire protection and flame properties. Many of our products for industrial cable protection systems are also distinguished by the following features: self-extinguishing halogen-free cadmium-free low flue gas emission weatherproof chemical permanence antistatic Accessories for your industrial cable protection: Of course FRÄNKISCHE Rohrwerke also supplies the appropriate accessories for your industrial cable protection. Mounting clips (with and without base) Mounting rails System holder (Corrugated) pipe clamps PETP - pipe edge protection v.m. Our products for industrial cable protection systems are suitable for all industrial pipe systems from our range.

The divisible corrugated conduits from FRÄNKISCHE Industrial Pipes offer the perfect solution for retrofit application of cable protection, also pre-assembled cable harnesses with already installed connectors. This divisible conduit type is suitable for applications in which cables or pipelines have to be marked separately. The suitable accessories from FRÄNKISCHE Industrial Pipes enable clean laying and fixing of pipes that are safely protected by FIPSPLIT - divisible corrugated pipes.

KURO cable protection pipes made of unplasticised PVC-U are ideal for the pressure-free underground installation of power and telecommunications cables. They also ensure perfect protection against all kinds of mechanical damage when used as cable protection pipes. HERE‘S HOW YOU BENEFIT: - Manufacture according to DIN 16873 and 8061/8062 - Advanced integral ring seal socket technology with permanent seal and long socket

KURO cable protection pipes made of unplasticised PVC-U are ideal for the pressure-free underground installation of power and telecommunications cables. They also ensure perfect protection against all kinds of mechanical damage when used as cable protection pipes. HERE‘S HOW YOU BENEFIT: - Manufacture according to DIN 16873 and 8061/8062 - Advanced integral ring seal socket technology with permanent seal and long socket

KURO cable protection pipes made of unplasticised PVC-U are ideal for the pressure-free underground installation of power and telecommunications cables. They also ensure perfect protection against all kinds of mechanical damage when used as cable protection pipes. HERE‘S HOW YOU BENEFIT: - Manufacture according to DIN 16873 and 8061/8062 - Advanced integral ring seal socket technology with permanent seal and long socket

KURO cable protection pipes made of unplasticised PVC-U are ideal for the pressure-free underground installation of power and telecommunications cables. They also ensure perfect protection against all kinds of mechanical damage when used as cable protection pipes. HERE‘S HOW YOU BENEFIT: - Manufacture according to DIN 16873 and 8061/8062 - Advanced integral ring seal socket technology with permanent seal and long socket

The challenging nature of civil engineering demands high quality protection from external loads. We can offer you a diverse cable protection programme for use in the power industry, traffic technology and communication technology.. Our strategic manufacturing relies on the highest standards for quality and accuracy in accordance with DIN 8061/62 und DIN 16873. Sophisticated quality controls and short lead times enable a fast and smooth transfer of your cable protection pipes. Are you looking for a solution to meet your specific requirements? Why not take advantage of our customized solutions in our workshop and utilize our wealth of experience.

The challenging nature of civil engineering demands high quality protection from external loads. We can offer you a diverse cable protection programme for use in the power industry, traffic technology and communication technology.. Our strategic manufacturing relies on the highest standards for quality and accuracy in accordance with DIN 8061/62 und DIN 16873. Sophisticated quality controls and short lead times enable a fast and smooth transfer of your cable protection pipes. Are you looking for a solution to meet your specific requirements? Why not take advantage of our customized solutions in our workshop and utilize our wealth of experience.

Practical, time-saving foam installation box with preconfigured multilayer pipe and fittings / connections for radiators. For masonry walls. Distance between flow and return flow 50 mm, with thermal and sound insulation as well as condensate protection. 2 MultiFit-Flex multilayer pipe connections dimension 16 mm. Box dimension: 120 x 95 x 50 mm (length x width w/o plate/width with plate x depth)