Results for
FILTERTECHNIK JÄGER GMBH
Germany
Special FTJ filter fleeces are particularly suitable as precoat or support fleece on horizontal plate pressure filters or plate filters The following precoat agents are used: Diatomaceous earth Bleaching earth Cellulose Cornmeal The FTJ nonwovens Cora®Dot and Cora®Spun effect corresponding savings on precoat agents with extremely fine filtration.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX® Brake Cleaner is a highly effective cleaning agent for drum and disc brakes, brake linings and pads, clutch linings and pressure plates, as well as all parts in and around the motor vehicle which are contaminated with oil, grease, etc. Due to the high proportion of active ingredients, an intensive and fast-acting cleaning is achieved. No residues remain. It is not corrosive and generally does not attack rubber and plastics. However, due to the variety of plastics on the market, a compatibility test is recommended.
Request for a quoteJUNIE - JUL. NIEDERDRENK GMBH & CO. KG
Germany
8574 FURORE pressure cylinders with mouting plated, ø22 mm, 13 mm hub, metal nickel plated, for door thickness up to 26 mm, without cylinder core, accessory: 1 rose nickel plated and 1 brass sleeve
Request for a quoteAQUACHEM GMBH SEPARATIONSTECHNIK
Germany
In the tried-and-tested, gasketed design, the EC-series offers many benefits to the user on top of its ease of operation. Due to the internal drainage, use in even the most hygienically clean areas is possible. The press lock is performed by an automatically self-regulating pneumatic/hydraulic closing system. The automatic closing pressure maintenance ensures that the plate pack always remains closed. An adjustable pressure switch with a potential-free contact is provided for integration into the customer's control system. This prevents the feeding pump from running uncontrollably. Also, as with all AQUACHEM filter presses, the discharge manifold can be generated here at the customer's request. Due to the gasketed design, the seamless backflushing of the filter media in the filter press is possible. The filter press frame is phosphated and powder-coated, offering a high level of protection against external influences.
Request for a quoteFRIEDR. FREEK GMBH
Germany
Micanite is a kind of insulation paper which is impregnated with a heat resistant binder and afterwards pressed in several shifts under heat and high pressure to plates. This material is heat resistant up to 350 °C, as special construction (Phlogopit) up to 450 °C, and is used for the wire wound formers as well as for the encapsulating cover plates of mica surface heaters. Because of the typical "sandwich"-construction of Micanite Flat Heating Elements and their high watt density it is necessary to use a platen to press the mica heater onto the surface to be heated. Established on the market for round Flat Heating Elements are some standard dimensions (Ø 58 / Ø 65 / Ø 80 / Ø 100 / Ø 160 / Ø 260 mm). But normally Micanite Surface Heating Elements are constructed on customer's request. Mica heaters can be metal sheathed for higher mechanical stability. This makes the heater flexible, so that it is also possible to build a band heater.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Pneumatic Rotational Clamping Holding torque 76 Nm Direct clamping on the shaft: Rotation motions are prevented by the ACE models LOCKED R. Their clamping elements are available for shaft diameters of 50 to 340 mm and ensure maximum holding forces. The clamp is immediately applied by the diaphragm and spring-plate system when pressure is lost. Pneumatic quick-switch valves reduce the reaction times. The costs are low in comparison with hydraulic clamping systems. Their performance is, however, achieved or exceeded despite the compact and easy to assemble design. Special versions for YRT bearings as well as active clamping elements are additionally available. ACE recommends the use of the optional shaft flange as wear protection. The clamping force can be increased considerably by the use of the additional air function.
Request for a quoteING. KURT SCHADE GMBH & CO. KG
Germany
Our steel construction is certified according to the current standards DIN EN 1090-2 and DIN EN 3834-2. We manufacture welded parts, welded constructions and welded assemblies up to execution class 3 (EXC3). Steel construction components such as: - Assembly devices for aircraft or automobile construction - Machine frames for compressor construction - Welded frames such as track systems and transfer tables - High-precision vacuum clamping plates for high-pressure presses - Complete rudder systems We produce both: individual components and small series. Do you have any questions about our techniques, capacities or prices? Contact us, we will be happy to give you direct information.
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
STAUFF High Pressure Filters type SFZ are designed for sandwich plate mounting in hydraulic and lubrication applications, with a maximum operating pressure of 315 bar / 4.560 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for sandwich plate mounting ▪ Available as left or right version Operating Pressure ▪ Max. 315 bar / 4.560 PSI Nominal Flow Rate ▪ Max. 30 l/min / 8 US GPM Materials ▪ Filter head: Free Cutting Steel ▪ Filter bowl: Cold Drawn Steel Media Compatibility ▪ Mineral oils, other fluids on request
Request for a quoteMPT DOSING GMBH
Germany
Homogenizing large tank volumes, mixing-in additives during the production of lubrication oil and suspending solids in a liquid phase are typical applications for the pneumatic pulse-mixing technology of PULSAIR. The process, patented worldwide, is based on an injection of an adjustable pressure pulse underneath an accumulator plate, installed on the bottom of the mixing tank. The injected pressurized air forms a big air bubble, soaring within the tank and displacing the surrounding liquid. Meanwhile negative pressure is generated underneath the bubble, sucking the surrounding material. This produces in the tank a vertical flow directed upwards, adjustable according to the requirements by varying the pulse length and the pulse duration. Contrary to mechanical agitators the height of the tank is very marginal. No moving parts or shaft bearings are in the tank.
Request for a quoteFATH GMBH
Germany
T-Slot Nuts and Rhombus T-Slot Nuts for Aluminum Profiles for groove width: 5 - 6 - 6,5 - 8 - 10 - 11 - 12 different designs possible: — single, double — retractable, swiveling — with/without thread — ESD-capable different fixations possible: — spring plate — spring ball — pressure spring different materials possible: — steel, galvanized — plastic — stainless steel separate spring for slot nut as mounting and positioning aid available as accessory many different designs in lengths and widths with/without fixation in the delivery assortment individual designs on request
Request for a quoteMSE FILTERPRESSEN GMBH
Germany
Based on the decisive properties of the flexible material, the rubberised filter press is mainly used for the filtration of particularly aggressive suspensions and environments. The aggressive suspensions include, for example, solvents or acids. In this context, the conventional painting of the steel parts is no longer sufficient. THE RUBBERIZED FILTER PRESS OF MSE AS PROTECTIVE MEASURES AGAINST AGGRESSIVE SUSPENSIONS In a complex process, the load-bearing filter press components are coated with a layer of 3mm thick plastic. In the case of the rubberised filter press, the hydraulic stands, feed stand, pressure plate and supporting beams are hard rubberised and the smaller components are made of polypropylene. It is also possible to rubberise only the components in contact with the product, such as the feed stand and the pressure plate. The composition of the rubber coating depends on the special surface requirements of our customers.
Request for a quoteERNST WAGNER GMBH & CO. KG
Germany
Large roll dispenser in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; visible surfaces satin finished and brushed. Designed for one standard large roll. Spring pressure plate to prevent unintended unrolling. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material. Dimensions 353 x 350 x 120 mm
Request for a quoteMOSCA GMBH
Germany
• Top-mounted SoniXs ultrasonic sealing unit • Automatic height adjustment of pressure plate to bundle height • Easy accessibility • Electrically driven lift plate with geared brake motor • Strap dispenser • Siemens PLC control with touch panel • 2-column design from 2,200 mm passage width Different Models: [KZV-111] • Top-mounted sealing head • One SoniXs- sealing head and one vertical strap guide • Movable strap lance for strapping of palletized goods [KZS-111] Like basic model KZV-111, with laterally moveable turntable [KOV-111] Like basic model KZV-111, with additional underfeed channel for unpalletized goods [KVV-111] Like basic model KZV-111, bottom arch with automatically controlled strap lance or underfeed channel; particularly suitable for strapping of frequently changing package types with or without pallets Options: • Automatic balk feeder with large buffer [KOV] • Angle edge protection for securing sensitive products for transport [KOV]
Request for a quoteSIEMPELKAMP MASCHINENFABRIK GMBH
Germany
The ContiRoll® press is the core element of the forming and press line and at the same time the focus of Siempelkamp’s innovations. More than 300 presses have been sold to all parts of the world since its launch 30 years ago. The concept has been continuously developed by Siempelkamp ever since, especially product quality, user friendliness and resource eciency. The exible infeed section adjusts to the formed mat in dependence on the recipe thus oering an optimal combination of a quick pressure build-up and a reliable evacuation of air from the mat. The booster heater integrated in the infeed end transfers a maximum of thermal energy into the mat. Very fast pressure and temperature build-up ensure an optimal density prole and excellent physical properties of the engineered board. Today, the 8th ContiRoll® generation is in use. It oers almost isobaric pressure distribution. Patented pressure distribution plates ensure consistent pressure in working direction acting on the product.
Request for a quoteHERMA GMBH
Germany
HERMA wrap-around labeler 152C: precise labeling at low cost Equipped with the high-performance labeler HERMA 500, it is suitable for up to 200 cylindrical products per minute The easy-to-maintain solution with a folding belt and back pressure plate offers amazing performance and a fast return on investment Most adjustments can be made without tools with little time required With the optional roller prism technology, even spiral misalignment is almost completely eliminated; even aligned labeling succeeds perfectly Clean Design with closed holes, minimum gaps and grooves, and rounded corners protects the 152C from contamination and makes it easy to clean and maintain Installation of a printer unit such as a hot stamp or thermal transfer printer is possible without any problems Is now available much faster due to the Clean Design and digitized ordering processes, optionally in EU or US versions.
Request for a quoteHEGEWALD & PESCHKE, MESS- UND PRÜFTECHNIK GMBH
Germany
Entire testing according to EN 1957 in one test stand possible No falsification of measured values because no rearrangements or transport of the mattresses and cushion frames between the durability test and the measurement of the hardness values H and HS are necessary The system can also be used for tests according to ASTM F1566 (necessary accessories: corresponding pressure plate for hardness testing, roller for tests according to ASTM F1566) The adjustable testing table frame guarantees a high flexibility for specimens of different sizes Flexible test parameter entry (e.g. number of cycles, test load) Automatic shutdown of the machine when the pre-set number of cycles is reached Exensive testing and evaluation software Alternative: Single test stand for durability tests on mattresses, spring cores and (box spring) beds according to EN 1957/ASTM F1566 Single test stand for the hardness measurement on mattresses, spring cores and (box spring) beds according to EN 1957/ASTM F1566
Request for a quoteHYDRAULIK SCHWERIN GMBH
Germany
Our standard range was developed with regard to technical and economic aspects especially for the increased requirements in machine and plant manufacturing. Steel and aluminum manifolds, adapter, blind and intermediate measurement plates are in stock at any time, allowing us to quickly meet your urgent requirements for various pressure stages. All plates have corrosion protection (zinc-plated or anodized).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Pressure plates - Import exportNumber of results
17 ProductsCountries
Company type
Category