Power hydraulics - Import export

shock dampening for low operating noise levels thanks to a heavy overall frame and the sturdy, warpresistant design with heavy doublepost guides even toughest materials can be cut smoothly with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control

GSW Shears find their place in CutToLength Lines or as Scrap Choppers. They are used to perform lasting and costefficient, no matter the roughness of the environment. Our pneumatic and hydraulic Shears are designed efficient in any way – and from 60 to 1500mm width The pneumatic machines run with up to 500 SPM while their heavy types are robust enough to lastingly process up to 3mm thick materials. Since they do not need hydraulic power or electric controls, they are extremely costefficient. If a combination of high SPM and thicker materials is necessary, our TSHL „light“ hydraulic Shears offer the solution. The TSHS series machines are built very heavy and stiff which allows them to cut up to 12mm thick materials. If yet larger widths than 1500mm are to be processed, we work together with most reliable German partners who supply us with highquality Shears in hydraulic, electric or servoelectric design. This way we can offer the very best suitable solution for any application.

shock dampening for low operating noise levels absolutely sturdy and warpresistant body design with heavy doublepost guides to smoothly cut even toughest materials with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control

We install the necessary hoses between hydraulic power units and press cylinders. We also create piping and circuits for thermal oils and cooling water.

1700-2500 PSI Hydraulic Power Packs for Hydraulic Circuits

Please contact us for more information on our program of DieClamps, Roller Bars, Consoles and individual Roller Components. We will gladly furnish a quotation for your specific need for you. Our offer included hydraulic power systems as well.

No coil expansion needed Selfcentering of coils through continuously adjustable coil side guides Wideopening alligator type straightening head for easy threading From 5 to 21 individually adjustable straightening rollers to serve any almost demand on the quality of the straightening result Drive via threephase servo motor; torque transmission simultaneously to all bottom straightening rollers, pinch rollers and cradle rollers Clockspring guard Allroll drive for straightening rollers Hydraulic hold down arm (optional w powered endwheel) Hydraulic threading system with snubber and peeler (optional w powered snubber wheel) Motorized coil guides Motorized straightening rollers Hydraulic opening / closing of straightening head Hard chromed rollers Edge guides adjustable to center via handwheel (optional motorized) Jobmemory feature for all motorized functions... etc

Can be dismantled in three parts so can be used from out of the building without a core drill, i.e. for FTTX, gas connections Pneumatically driven hammer bore head assembly is ideally suited for alternating soils. If the hammer bore head meets with resistance (larger rock inclusions, solid rock, rubble deposits or brickwork), the hammer effect is activated automatically. The complete system with hydraulic power unit and mixing unit MA09 can be placed on a small trailer for safe transportation. Can be dismantled Portable Can be applied from out of a building

ideally suited for large coil widths and thicknesses dual arbors for minimal deflection hydraulic wedge type expansion systems highestquality Reel Arbor with maintenancefree bearing and minimal deflection integrated hydraulically powered coil loading system for narrower coils even onesided use possible coil reels as seperate movable components proven support of large rollforming applications especially for the manufacture of welded tubes SHZR Series with variable speed drives via threephase motors and frequency inverter

Electric cylinders are self-locking. So they do not need energy when they stand still. This makes the electric cylinders to be an interesting alternative to pneumatic and hydraulic actuators. Powerful DC motors, signal lines, potentiometers and Hall-ICs for position indication, as well as integrated end switches uncomplicatedly serve for meeting the most frequent requirements.

The versatility and and capability of LAWECO products is most notably shown in coil processing systems. In the infeed and outfeed areas, coil lifting carriages primarily handle the coil. In conjunction with various rack systems even complete solutions can be realised. In the stack areas, stationary and movable scissor lift platforms provide the required handling. Here, it is also our goal to respond to the wishes and requirements of our customers and to provide individual solutions. Load bearing capacity up to 150 t Movable or stationary With simple, tandem or double scissor With materials handling technology or special constructions Mechanical coupling facility With powerful switching hydraulics or control valve technology With weighing device With positioning system

0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 200 KN Punching tools according to profile shape Aluminium profile – finished Cut to length Vertical punching Up to 8 profiles in one operation cycle Cycle time from 13 s / 1,63 s each piece Layout of punching tools for multiple profiles Quick change punching tools according to the profile shape Pneumatic material feed 8 profiles at once Special shaped quick change support Clamps according to profile shape – changeable Hydraulic punching unit Power 200 KN, stroke 20 mm Cycle spray mist device for each die and for the saw blade

Hydraulic Submersible Water Pumps with grill Hydraulic Submersible Water Pumps with Open Suction Hydraulic Mounted Submersible Water Pumps Brochure Submersible Water Pumps 7 MOTIVES TO CHOOSE HYDRAULIC PUMPS FOR THE POWER PERFORMANCES The hydraulic pumps have an unbeatable power / weight/ dimension ratio, example an hydraulic motor with power of 15 k W have a weight of only 4 k g and the dimension of a beer cr ate , which other type of motor either electric, gasoline, pneumatic or other can give such concentrated power. This gives to the hydraulic pumps compactness, lightness, easy handling and unmatched performances. In case of emergencies and calamities (like floods) where are necessary efficiency, high power, speed, capacity of operate in all situations then no other pumping system is better then hydraulic pumps, guarantee !!! FOR THE SAFETY Absence of electricity is an implicit assurance of safety as it is impossible to cause electric shocks, a man can work in all...

1000-fold proven components of the KAUP modular design combined in a particular way: these make up KAUP Stationary Material Handling Equipment. They consist of project related system solutions which can be integrated in every production process. Our devices have already been implemented for handling bagged products such as sugar or cement. But also in goods handling and storage of consumer goods and beverages, when turning sheet metal or paper sheets for processing on both sides, our application orientated devices are in great demand. The majority of our equipment is driven by a hydraulic power unit. They can be controlled automatically, semiautomatically or manually and so optimally adjusted to the customer requirements.

Immersion pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies.In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boostingpumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. Extended length is possible. See mechanical/hydraulic features within the technical information section. Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Please contact us for delivery quantity

Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Horizontal cutter pumps

Our range of transformers oil water coolers can be supplied in different mounting variants. The standard water cooler version is designed for direct mounting to the transformer tank. In addition, our range of products comprises free-standing transformer oil coolers designed to customer specifications. The coolers in general are used for specific types of transformers, such as furnace transformers or rectifier transformers. A further application is machine transformer cooling at hydraulic power plants. Transformer oil water coolers are available in different design versions.

Technical data UNI FUTURE with pressure transducer Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg SUPPLIED WITH Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data cube with pressure transducer and lock valve Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Keeps the pressure of max. 850 bar upon actuation of the stop valve Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg The lock valve for pipe crimping tools prevents reduction of oil pressure in the tool. So it is possible to hold hydraulic pressure over not time limited space. Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data UNI FUTURE 2050 SCU Also as a drive towards a cutting system Automatic detection with switch-off pressure required for achieving the required operating pressure of 20 bis 700 bar Suitable for all tools with a oil flow to 700cm³ With pressure gauge (1000 bar) and ground connector on the front side With pressure sensors for advanced features Detection tool with speed adjustment to (tool speed 10mm/sec) BG provision to fulfill Optional jogging for intermittent tool feed. Power adjustable,short time possible to 1,2 kW ch Network and battery (24/230V) Powerful Li-Ionen Battery 25,2 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy spaving mode– 10 minuets after the last activity or to low battery condition, switches off the unit Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatic adjustment to 1l/min Size L/B/H: 222 x 168 x 229mm (Handle height 40mm) Weight: ca. 6,9 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Tool bag for hydraulic power unit Uni Future 2050 High strengh grey polyester-woven fabric Waterproof > 0,2 bar High scouring resistance Protect your tools from external environmental influences (Dirt/Dust) Overall space-saving storage Easy handling Low weight DIMENSIONS: 350 x 280 x 300 mm

Safety cutting unit consisting of: Hydraulic power unit cube Integrated pressure gauge up to 1000 bar 10m High pressure hydraulic hose (metal free ), firmy connected to the cutting head Superlight cutting head ipr50HS Remote Control 3m Power charger 3m User manual Tool case The total weight of our 95 securty system weights about 17 KG and not 30 KG!

Quenched special steel body! Powerful impact resistance, especially against impulses. Valve is designed to suppress pressure loss, particularly suitable for hydraulic applications which need big fluid flow rates. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Easy to handle. In addition to conventional female thread type, male thread types (male tapered thread, male parallel thread with 30˚ flare, and male parallel thread with 30˚ coneseat) are newly added. Male thread types are designed especially for direct connection to hydraulic power units effectively. Male parallel thread type complies with both metal seal and Oring seal. (In case of Oring seal, Orings available in the market can be used.) Optional HSPDC Cuplas are available for diecasting machine applications with severe pressure variation. The overall length of male thread type is shorter than that of female thread type plus conversion nipple available in the market.

Application The portable HD 2500 is designed for delivering high hydraulic pressure up to 2500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 2500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Application The portable HD 1500 is designed for delivering high hydraulic pressure up to 1500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 1500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Description TDC 1500 Year of construction 2017 Serial Number 36160700-1 Product contacted material 316L Seal design PTFE – FEP Silicone Vessel diameter (mm) 1,460 Total volume (l) 1,780 Useful volume (l) 1,000 Agitator drive (HP) 30 Speed range (rpm) 3 – 33 Mechanical seal Yes (lift-off / contacting seal) PED No ATEX No ASME / “U” STAMP Yes Dust filter (m²) 0.9 Hydraulic power pack Yes Control System Yes Motor and Gearbox 30 HP – 3×480 V+N, 60Hz Electric components CSA Class 1, Zone 2, Group IIB, T3

Hydraulic clamping systems from AMF: powerful, precise and flexible. The hydraulic clamping systems from AMF include a wide range of components, which in turn are available in many different designs. This means that we are able to offer fully developed technology with different features tailored precisely to the needs of the different areas of use.

Valve Bench for Hydraulic Power Station

Power Hydraulic Unit 7 Pumps and Oil Tank