Results for
INTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Idler pulley with pin made of stainless steel. The embossing ensures a smooth and steady drive of the conveyor belt.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
In the field of plastics we offer metal strips with PVC plastisol and/or organosol coatings, as well as polyamide plastics. PP (polypropylene), PE (polyethylene), PC (polycarbonate), PET (polyethylene terephthalate) and PLA (polyactide), TPE (thermoplastic elastomer), TPU (thermoplastic polyurethane) and others. These can be produced with a layer thickness of 5-200 μm Depending on the plastic, higher layer thicknesses can also be achieved. In addition, most plastics can also be equipped with antibacterial properties; of course in all colour variations. Although a one-sided coating more common, we are able to apply the same and/or different plastic adhesives for both sides.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
We coat rollers up to 3 m in diameter and weighing up to 2 t! We will be happy to provide you with rollers complete with wheels. We have good international contacts for procuring wheels made from steel, aluminium and stainless steel. Upon request we can mill a profile in the coating or form profiles directly during casting.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
No-crush roll made of polyurethane with hard core as well as ball bearing. This ensures enormous flexibility - an ideal application in the paper industry. Furthermore, different diameters as well as profiles are possible. The recovery properties of the no-crush roll are determined by the profile and the hardness.
Request for a quoteEICHSFELDER SCHRAUBENWERK GMBH
Germany
Hook for tail gate locking system (partial plastic coated)
Request for a quoteEICHSFELDER SCHRAUBENWERK GMBH
Germany
Pawl (plastic coated stamped part)
Request for a quoteEICHSFELDER SCHRAUBENWERK GMBH
Germany
Check link (plastic coated)
Request for a quoteEICHSFELDER SCHRAUBENWERK GMBH
Germany
Check link (plastic coated)
Request for a quoteEICHSFELDER SCHRAUBENWERK GMBH
Germany
Check link (plastic coated)
Request for a quoteSPRIMAG SPRITZMASCHINENBAU GMBH & CO. KG
Germany
precise coating of flat parts
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
These systems can only be fastened by adhering (glue or double-sided tape). Adequate adhesive is available from specialised trade. The following materials can be found at the rear: A18B-Ks: Polyamide (PA) A22B-Ks: Polyamide (PA) A31B-Ks: Galvanised steel AS031NdB-00s-03: Polyamide (PA) A43B-Ks: Polyamide (PA)
Request for a quoteSIKO GMBH
Germany
Various sizes. Plastic-coated or bright-finished surface. Various hub versions.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
In coil coating, an organic coating is applied to the surface of a metal strip in a continuous process. The HUEHOCO portfolio includes both decorative and weather-resistant coatings as well as system solutions for a firm bonding of the metal strip with various rubber compounds and/or various plastics. For technical applications, there are also high-temperature resistant and non-stick as well as anti-friction systems, directly rubber- or plastic-coated metal strips. Since 1989 we have been the first company in the world to offer our customers the opportunity to have their goods delivered "endlessly" wound with more than 200,000 metres in a single strip on metal or plastic spools. Depending on our customers' requirements, we can process all wrought aluminium alloys, stainless steels, steel grades and non-ferrous metals available on the market in various degrees of hardness.
Request for a quoteSIKO GMBH
Germany
Premium knurled aluminum handwheel. Compact design. Various sizes. Surface plastic-coated, anodized or bright-finished. Various hub versions.
Request for a quoteSIKO GMBH
Germany
Robust handwheel made of aluminum casting. Rounded design with dirt corners minimized. Various sizes. Plastic-coated or bright-finished surface. Various hub versions. Turning handle as an option (see accessories).
Request for a quoteSIKO GMBH
Germany
Classical handwheel made of aluminum casting. Various sizes. Plastic-coated or bright-finished surface. Various hub versions. Turning handle as an option (see accessories).
Request for a quoteDEKORTECH GMBH
Germany
Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Strong hot-tack ✔ Application temp.: 50 - 100°C ✔ For ABS, SAN, PET and more Our MT-I hot melt dispersions is tailored for heat transfer printing. With a wide activation temperatur range it can be used also on materials like PET. Futhermore, the formulation creates and adhesive film which has a high hot tack. Due to this it is easier to achieve great bonds and to print at higher speeds. It shows good adhesion on many materials, which makes it a great adhesive to skip cleaning the coating equipment. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional like pens. It shows good resistance against water. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
JOSEF MACK GMBH & CO.KG
Germany
The great variety of contact shoe shapes and materials means there are very few limits in terms of applications. Which linear current transmission system are you working on at the moment? Amongst other applications, our collector shoes are in use on power rails and current collectors, as grounding contacts, or for electrifying port cranes (E-RTG). One special feature: MACK contact shoes can be plastic coated if required. This provides partial insulation and enables perfect coordination throughout the whole system. Exactly as you need it.
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
Filling compound such as epoxy resin filler (“epoxy putty”), fine filler or repair putty are used for corrosion protection, repairing scratches and unevenness in metal, wood and fibreglass-reinforced plastics. These coatings are mainly used in boat building.
Request for a quoteMICRO-EPSILON
Germany
In its sensor housing, the combiSENSOR combines two displacement sensors. This unique sensor concept enables one-sided thickness measurement of electrically non-conductive materials on metallic objects. Its field of application is the thickness measurement of plastic film or of plastic coating on metal plates. The eddy current sensor penetrates the plastic layer and measures the distance to a metallic material underneath it, e.g. a metal plate. The capacitive sensor synchronously detects the distance to the plastic material. The thickness is determined based on the difference of both sensor signals.
Request for a quoteTEMCA GMBH & CO. KG
Germany
The foam soap dispenser CLIVIA® Colored-Edition S50 is the optimal supplement in all washrooms. The dispensers offer highest convenience to the user due to silky foam structure and pleasant skin feeling. The dispenser is made of robust ABS-plastic, coated with a soft touch Oberfläche and lockable. There is a viewing window for simple maintenance. The capacity of CLIVIA® Colored-Edition S50 foam soap cartridges is 500 ml. Remark: Guarantee only when used with our CLIVIA®-soap (due to tested viscosity).
Request for a quoteTEMCA GMBH & CO. KG
Germany
The foam soap dispenser CLIVIA® Colored-Edition S50 is the optimal supplement in all washrooms. The dispensers offer highest convenience to the user due to silky foam structure and pleasant skin feeling. The dispenser is made of robust ABS-plastic, coated with a soft touch Oberfläche and lockable. There is a viewing window for simple maintenance. The capacity of CLIVIA® Colored-Edition S50 foam soap cartridges is 500 ml. Remark: Guarantee only when used with our CLIVIA®-soap (due to tested viscosity).
Request for a quoteTEMCA GMBH & CO. KG
Germany
The foam soap dispenser CLIVIA® Colored-Edition S50 is the optimal supplement in all washrooms. The dispensers offer highest convenience to the user due to silky foam structure and pleasant skin feeling. The dispenser is made of robust ABS-plastic, coated with a soft touch Oberfläche and lockable. There is a viewing window for simple maintenance. The capacity of CLIVIA® Colored-Edition S50 foam soap cartridges is 500 ml. Remark: Guarantee only when used with our CLIVIA®-soap (due to tested viscosity).
Request for a quoteTEMCA GMBH & CO. KG
Germany
The foam soap dispenser CLIVIA® Colored-Edition S50 is the optimal supplement in all washrooms. The dispensers offer highest convenience to the user due to silky foam structure and pleasant skin feeling. The dispenser is made of robust ABS-plastic, coated with a soft touch Oberfläche and lockable. There is a viewing window for simple maintenance. The capacity of CLIVIA® Colored-Edition S50 foam soap cartridges is 500 ml. Remark: Guarantee only when used with our CLIVIA®-soap (due to tested viscosity).
Request for a quoteTEMCA GMBH & CO. KG
Germany
The foam soap dispenser CLIVIA® Colored-Edition S50 is the optimal supplement in all washrooms. The dispensers offer highest convenience to the user due to silky foam structure and pleasant skin feeling. The dispenser is made of robust ABS-plastic, coated with a soft touch Oberfläche and lockable. There is a viewing window for simple maintenance. The capacity of CLIVIA® Colored-Edition S50 foam soap cartridges is 500 ml. Remark: Guarantee only when used with our CLIVIA®-soap (due to tested viscosity).
Request for a quoteTEMCA GMBH & CO. KG
Germany
The foam soap dispenser CLIVIA® Colored-Edition S50 is the optimal supplement in all washrooms. The dispensers offer highest convenience to the user due to silky foam structure and pleasant skin feeling. The dispenser is made of robust ABS-plastic, coated with a soft touch Oberfläche and lockable. There is a viewing window for simple maintenance. The capacity of CLIVIA® Colored-Edition S50 foam soap cartridges is 500 ml. Remark: Guarantee only when used with our CLIVIA®-soap (due to tested viscosity).
Request for a quoteLUTZ PUMPEN GMBH
Germany
Suitable for neutral and aggressive liquids as well as liquids containing solids Application: Centrifugal pump for dry-well installation featuring a bearing-less cantilever design with direct-coupled IEC motor. Specially designed for plant engineering and confined spaces. The B80 HME Series can be operated beside the container in a dry-well installation. Liquid flowing up inside the shaft guide tube returns to the container via an overflow line. Pumps in dry-well installations allow an easier access to carry out maintenance and repair work. Features: Directly-coupled in bearing-less cantilever design Radial and axial fixed drive elements in two-piece bearing shell Pump housing in glass-fibre or carbon-fibre reinforced plastic (PP or PVDF) Gas seal for protecting the motor bearing Plastic-coated drive shaft Driven by IEC standardised motors Benefits: Compact dimensions Service-friendly dry-well installation Self-centring alignment in the bearing shell Vibration-free and...
Request for a quoteKULLEN-KOTI GMBH
Germany
The roller brush type 964 is made of single section brushes mounted together on a core up to the required face width. This roller brush type can be mounted on cores made from stainless steel, plastic coated steel, or mild steel. Kullen-Koti recommends especially this brush type for heavy-duty operations with a high dense brush surface, e. g. by using our single section brushes with twisted steel knots (Type Z-SH). But we can manufacure the single section in almost all other fill material types. For mounting the single section brushes on the core or by the operator himself on the existing primary shaft, we use our fixing ring (FRB / scew nut (MB) system. The single section brushes are available in 10 particular series-diameter (KD.) The single section brushes can be supplied as roller brushes type 964 with the following core systems: - system WK 1/WK 2 with journals. - tubular core with reduction bushes (WK 3). - "Throw-Away" system with thin-walked tube with arbor hole fitting on...
Request for a quoteKULLEN-KOTI GMBH
Germany
The STS-spiral roller brush range from Kullen-Koti contains all measurements from small to extra large and this unbeatable selection of diameters makes this brush a totally reliable tool for light brushing tasks. Due to the high fill density and precisely ground surface it achieves outstanding results. A flawless radial true runing is a requirement in most cases to achieve the desired brush effect. Therefore the brush cores are electrodynamically pre-balanced and re-balanced according to the required RPM after assembly of the spiral brushes. The balancing quality refers to quality grade G 2.5 as per ISO 1940. As core material we have available: mild steel, stainless steel, non-ferrous metal or plastic coated steel. Fixing of the spiral coils The coils are generally mounted onto the roller cores with pressure rings (PRB) in order to prevent the brush from roating on the core. Depending on the work and the rotation speed of the brush the coils can also be spot-welded or screwed...
Request for a quoteResults for
Plastic coating - Import exportNumber of results
110 ProductsCountries
Company type
Category