Results for
DEKORTECH GMBH
Germany
Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Strong hot-tack ✔ Application temp.: 50 - 100°C ✔ For ABS, SAN, PET and more Our MT-I hot melt dispersions is tailored for heat transfer printing. With a wide activation temperatur range it can be used also on materials like PET. Futhermore, the formulation creates and adhesive film which has a high hot tack. Due to this it is easier to achieve great bonds and to print at higher speeds. It shows good adhesion on many materials, which makes it a great adhesive to skip cleaning the coating equipment. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional like pens. It shows good resistance against water. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.
Request for a quoteTROTEC GMBH
Germany
COMMERCIAL DEHUMIDIFIER TTK 350 SProfessional all-rounder for demanding drying operations Black and white combined in a powerful device. The TTK 350 S makes you stop thinking in terms of black and white or good and cheap. It is simply both combined in one device, allowing you to benefit from prices at a Far East level without compromising in terms of workmanship and reliability. For the quality of this dehumidifier is no accident – but traditional EU manufacturing. Not only the plastic-coated metal housing but also the stable carriage construction with bar handle and large transport wheels for maximum mobility demonstrate the dehumidifier's robust and durable design. The operating switch and the filling level warning light are protected from dust and spray water by a protective cap, and a slotted hygrostat rotary switch protects against inadvertent misadjustment of the switch position.
Request for a quoteFRIEDRICH AUGUST PICARD GMBH & CO. KG
Germany
The contact wheel FAPI-PUS/KS is an extremely soft version of a contact wheel with a polyurethane foam and plastic foam lamella coating. The overall height of the coating must also be selected based on the respective application. The alternating polyurethane and plastic foam lamellae make the contact wheel extremely soft and particularly adaptable. In practice, this contact wheel is used mainly for the finishing of strongly cambered or rounded workpieces. Because of the different material densities and the spacing between the lamellae heat dissipates very well during the grinding process. Advantages The contact wheels of the FAPI-PUS – series are coated only with polyurethane foam lamellae. Benefits of contact wheels with polyurethane foam lamellae: Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Self-adhesive strips with plastic-coated filing bar for organising punched documents in folders and the like. • FLEXIFIX® self-adhesive filing strips for attaching punched documents • Filing strips stick to smooth surfaces in files, document files and lever arch files
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Robust clear-view folder, suitable for A4 extra wide. With a labelling window and an inside pocket. • Loose-leaf binder with transparent front cover and coloured back cover • Suitable for filing punched pockets thanks to extra-wide A4 format • Tear resistant thanks to plastic-coated filing mechanism • Labelling window in business card format 90 x 57 mm on the front cover • Inside pocket at the back for storing unpunched documents • Suitable for hanging in a suspension filing system with the additional purchase of suspension rail product # 1531 • For A4+ format
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Robust loose-leaf binder with a coloured front and back cover. With a labelling window and an inside pocket. • Loose-leaf binder with a coloured front and back cover as a privacy protection for documents • Suitable for filing punched pockets thanks to extra-wide A4 format • Tear resistant thanks to plastic-coated filing mechanism • Labelling window in business card format 90 x 57 mm on the front cover • Inside pocket at the back for storing unpunched documents • Suitable for hanging in a suspension filing system with the additional purchase of suspension rail 1531 • For A4+ format
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For short, straight and figure cuts, large radii • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Strong design • With long flat jaws • Serrated inside jaws • With lap-joint and strong handles • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For straight cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For straight cuts • Cutting edge hardness 56-58 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For fitting internal circlips in holes • With 45° angled jaws • Anti-slip, twisted precision tips • Handles coated with plastic • Made of chrome vanadium steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For gripping small parts and forming wires • Smooth inside jaws, edges rounded • Tight-fit joint movement • With box-joint and opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Strong design • With long round jaws • Serrated inside jaws • With lap-joint and strong handles • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For gripping and bending • With long round jaws • Serrated inside jaws • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For short, straight and figure cuts, small radii • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For uninterrupted, straight and figure cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For gripping small parts and forming wires • Tips bent 45°, smooth inside jaws, edges rounded • Tight-fit joint movement • With box-joint and opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Specifically geared towards the requirements in the building and manufacturing industry • Cutting edges inductively hardened • Precision cutting edge for bolts, nails, rivets, hard wires and similar materials • Asymmetrical cutting edge for easily cutting long workpieces, too • Power transmission with optimum leverage for easy and effortless work • Tremendous cutting performance, up to 50 % power saving compared with conventional end cutting pliers • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Most popular shape for assembly work, trimming printed circuit boards, also for radio and telephone work • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Tight-fit joint movement • With box-joint and opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles coated with plastic • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Precision cutting edge for bolts, nails, rivets, hard wires and similar materials • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Tremendous cutting performance, up to 50 % power saving compared with conventional power side cutters • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteResults for
Plastic coating - Import exportNumber of results
35 ProductsCompany type
Category