Part loads - Import export

All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY

The human feet have to carry us every day and are constantly exposed to great strain. However, they receive far too little recognition for their heavy duty. Feet need a lot of attention, yet very few people like to talk about our daily companions and their supporting role. They are always enclosed, they have to surround themselves with skin-unfriendly fabrics and with shoes that are too tight, too wide or too high. Incorrectly treated and neglected feet often fail their duty and a lack of care often leads to deformations of bones, muscles and tendons and to damaged skin and nails. Yet, good foot care only takes up a little time. Foot creams and foot balms care for, disinfect and scent the skin and provide a supporting massage of the feet. WFS produces corresponding care products on customer’s order.

Universal drive control for utmost efficiency MAGSON magnetically coupled centrifugal pumps are extremely efficient by nature. Using the SFU frequency converter for optimum adjustment to changing conditions, this efficiency will increase even more. Thanks to leading-edge control technology, the SFU permanently adjusts the discharge rate to specific requirements. Whenever the rate has to be reduced or the pump has to be operated with changing volume flows, using a frequency converter will save you lots of money. Thus, the power required by a pump running at half speed is only 12% of the original demand. So the system operates with optimum efficiency but saves a lot of energy, especially in part-load operation.

Grease lubrication of unsheltered parts subject to heavy loading and/or impacts, such as friction, rolling and pivoting bearings, splined shafts, knockout spindles, threaded spindles and sliding surfaces of all kinds For harsh operating conditions Advantages and benefits Excellently suited as a safety lubricating grease in mixed friction sector with especially good wear protection Effectively protects against corrosion Contains Mox-active to improve performance For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease

For the lubrication of machine parts under high mechanical loads Silicone-free alternative for the lubrication of O-rings and sealings during assembly For the lubrication of plastic/plastic and plastic/metal combinations, e.g. beverage can holders in the automotive industry Advantages and benefits High shear stability Excellent adhesion on plastics and metals Compatible with plastics (see table OKS 468) Constant properties without drying, hardening or bleeding NSF H1 registered Silicone-free MOSH/MOAH-free

Pelton turbines are used in hydropower plants with a high head. The sealing system specifications are equally high.Control of the turbine output is infinitely variable from part to full load by adjusting the nozzle spear valve. The control unit for linear adjustment of the jet needle can be protected against water and silt infiltration by the MANOY® system seal WP. Types 466 and 486 (both inner sealing) were specially developed for these applications. Types 461 and 481 are for outer sealing configurations. In the context of design, types 481 and 486 must have a split housing. All versions can be supplied with customized profile dimensions for existing groove designs.

With the help of the MULTICELL concept, small multi-head applications can be easily implemented. In general, the plastic parts to be welded are loaded directly below the sonotrodes. A shuttle table can be optionally integrated for improved handling. This modular concept is particularly suitable for 20 kHz applications with sound insulation and can be customized by installation of a large number of accessory options. The compact make-up and high degree of mobility allow for universal application in manufacturing.

Metzner provides a number of proven automation solutions for the automatic loading and unloading of coating carriers for CVD and PVD coatings. The abbreviations PVD (Physical Vapour Deposition) and CVD (Chemical Vapour Deposition) stand for different coating processes. When loading the PVD spears, we differentiate between "single-loading" and "back-to-back loading". In addition to part loading, spacers are loaded onto the spears in addition to the parts. In single-loading, a spacer is located behind each individual insert, whereas in back-to-back-loading, two inserts are placed "back to back" and only then is a spacer loaded. To implement "back-to-back-loading", a turning station is integrated into the machinery. This station is used to turn the corresponding insert by 180 degrees, loading it directly onto the respective spear.

Metzner powder press and indexable insert automations of the "RPA 3-SC series" automatically remove pressed blanks from a powder press and deposit them quickly and gently in a definable sample. In the "RPA 3-SC1", the transfer of the individual sintering plates and the loading of the blanks is carried out by a SCARA 4-axis robot. The empty sintering plates are placed manually into a sintering plate magazine, removed with a sintering plate gripper if necessary, and fed to the loading position. The robot then moves to a gripper station, deposits the sintering plate gripper, picks up a part gripper, and starts loading the sintering plate. In the "RPA 3-SC2", sintering plates are placed manually on a double conveyor belt. One sintering plate at a time is automatically transported to the loading position via the conveyor belt. The robot immediately starts to load the blanks. Loaded sintering plates are ejected from the loading position and manually removed from the conveyor belt.

nduction Heating and Joining in one turnkey system. This turnkey system is used to heat electric motor housings with various dimensions for a wide range of joining processes. Example Heating System 1: the die-cast aluminium housing for an asynchronous motor (diameter 450 mm) is heated to approx. 290°C in approx. 5 minutes to fit the wound stator package. The parts are loaded and unloaded from the feeding belt parallel to the working time. The heating process takes place in two independent work stations. The generator has a switched output which means that only one generator is required for the two heating stations. The system is controlled using a SIEMENS PLC controller. Example Heating System 2: the aluminium housing (diameter 140 mm) of a synchronous motor is heated to approx. 280°C in approx. 3 minutes to fit the stator. The component is loaded into and unloaded from the heating station semiautomatically. The system is controlled using a PLC.