Multi-channel - Import export

Non-contacting multi-channel speed sensor with square wave output signal, stainless steel threaded tube, difference-hall-effect or inductive magnetic principle. Due to its design and its approvals especially suitable for shipbuilding industry. Robust housing: IP66/68 Excellent vibration and shock resistance Variable lengths, threads and electrical connections Optionally with two galvanically isolated output signals Optionally with additional status signal (e. g. direction of rotation detection) Approvals: ABS, BV, DNV-GL, LR

Non-contacting multi-channel speed sensor with square wave output signal, brass threaded tube, difference-hall-effect or inductive magnetic principle. Due to its design and its approvals especially suitable for shipbuilding industry. Robust housing: IP66/68 Excellent vibration and shock resistance Variable lengths, threads and electrical connections Optionally with two galvanically isolated output signals Optionally with additional status signal (e. g. direction of rotation detection) Approvals: ABS, BV, DNV-GL, LR

The All-in-One module 2511 is predestined for use in automated manufacturing testing of high-performance battery modules and battery packs, regardless of whether they are round, prismatic or pouch cells. In single or multichannel mode, important battery parameters such as AC and DC internal resistance or cell voltage can be recorded and evaluated extremely fast and precisely using fieldbus-capable technology in order to make quality-relevant statements regarding ageing .............. FEATURES AC and DC internal resistance measurement 10 … 300 mΩ Four-wire measurement method for highest precision Measuring and evaluation results in a few milliseconds Frequency ranges: 1kHz, 100 Hz, 10 Hz, 1 Hz Voltage measurement: 0 ... ±5 VDC/±60 VDC Temperature measurement: 0 °C … +100 °C Resolution: up to 0.01 μΩ Single to multi-channel applications, temperature measurement Extremely compact design, state-of-the-art interfaces PC software for intuitive parametrisation and configuration

The 9163 process value indicator covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via PROFIBUS, RS232 interface or analog output. The multi-channel version can be used with up to four sensors. These sensors can be combined using mathematical functions, so that even complex measurement tasks can be performed with just the one instrument. Visual alarms on the display make it easier and more convenient to assess when values lie off-limits. Up to four configurable outputs are available as relay or logic outputs. The excellent measurement accuracy of 0.1% also makes this instrument suitable for high-precision applications.

Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design - Multi-channel applications possible

Testing by means of mass flow method - Multi-channel applications possible - Different measuring ranges possible - Electronic pressure regulator - Completely remote controllable - Optionally remote controllable via ProfiNet

With the EASYPRO CS, you get a configurable system. This customised solution is ideal for industrial applications and saves costs as only the required components are installed. The design of the base plate allows the CS120 to be used in combination with up to three other measured variables in the water. The integrated TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls a large number of actuators and final control elements and is simple and intuitive to operate. Components of the EASYPRO CS (mounted on base plate): . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . DFR 45 flow controller with temperature sensor and sample water tapping point . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs

With the EASYPRO, you get a customised system for monitoring and controlling the water parameters in your swimming pool. The TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls numerous actuators and control elements and is simple and intuitive to operate. Multi-coloured LEDs provide a visual warning if the water parameters are outside the target range. . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . Flow controller DFR 45 with sample water tapping point and built-in temperature sensor . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs . Cover bonnet Some of the measuring cells are packaged separately and are not pre-assembled.

The IF2008/ETH interface module is designed for multi-channel applications. This module allows for up to 8 Micro-Epsilon sensors or encoders with RS422 interface to be integrated into an Ethernet network. Furthermore, the converter offers 4 programmable switching inputs/outputs (TTL and HTL logic) as well as 10 indicator LEDs, which show the channel or device status directly on the device. Parameter setting of the interface module can be easily done via the web interface.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

The capaNCDT DTV series is designed for non-contact detection of Disc Thickness Variation (DTV). Capacitive sensors for multi-track measurements and a carrying case including the complete measurement channel for mobile use are available. With the capaNCDT DTV measurement system, capacitive displacement sensors determine the thickness of the brake discs from both sides based on the difference principle. While the brake disc rotates, the thickness deviation is determined via the circumference of the entire disc. Using several sensors in pairs or the CSH1,4FL multi-channel sensor makes multi-track thickness measurement possible. Thickness measurements can be carried out in test benches, in road tests or in car repair shops. The DTV case is intended for mobile use, e.g., for quality assurance purposes and warranty claims.

Capacitive displacement sensors are designed for measurement tasks that require extremely high precision. The capaNCDT 6500 capacitive multi-channel system is ideally suited to reliable measurements down to sub-nanometre resolution. The controller offers a maximum response rate of 7.8kHz (digital, with up to four channels) or a frequency response of 8.5kHz. As well as an analogue output, an EtherCAT interface is also available. EtherCAT enables accurate data transmission in real time, with high speed integration into the existing measurement environment and synchronisation of two systems. Set up and configuration of the capaNCDT 6500 system are carried out easily using a web browser.

The capaNCDT 6200 is the first entirely modular multi-channel measuring system. The controller can be expanded to 4 channels and is therefore suitable for flexible applications. All capacitive displacement sensors from Micro-Epsilon can be operated using the capaNCDT 6200 controller. The integrated Ethernet interface supports parameter setting and measurements via web interface. The DL6230 demodulator provides high resolution measurements. For high-speed measurements up to 20 kHz, the capaNCDT 6222 system is available.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

The range of functions has been limited deliberately to ensure operation is simple and self-explanatory. With its unique, large and clear digit height of 20 mm, the digital display can be installed easily in process control panels and control cabinets. Thanks to the large choice of measurement signals that can be indicated, the display is ideal for use in a huge range of industry-based applications. As a simple and compact digital display, it can also be used as a multi-channel solution in laboratory or test systems, where several different measurements may need to be taken and displayed simultaneously. Specific characteristics: — Less expensive digital display — For force, pressure or torque measurements using gauge sensors — Two limit alarms optionally available — Extremely easy-to-read display with 20 mm digit height — Display range -1999 to + 9999 — TARE function — Scaling possible using teach-in procedure or by entering sensor data directly

The SENSORMASTER 9163 covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via USB, RS232 or analog output. Features: — For force, pressure or torque measurements using strain gauge sensors — For position or angle measurement using potentiometric or DC/DC sensors — For temperature measurement using Pt 100 sensors or thermocouples — Optional multi-channel model — Optional Profibus or serial interface — 0.1 % measurement accuracy plus sensor-specific linearization — Range of mathematical functions (e.g. differential measurement) — OK/NOK feedback on multi color display and via 4 alarm limit outputs — High sampling rate (500/sec.)

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and Fieldbus controller can be integrated into any existing setup. The Fieldbus controller delivers all signals exactly where they are needed, to be combined, checked and linked. With the available Fieldbus interfaces, you are flexible, perfectly connected and you save time, costs and other resources when linking to and integrating into existing systems. Due to the integrated measuring input, the use of a Fieldbus controller module is sufficient for single-channel applications. For multi-channel applications, the system can be expanded to up to 9 measuring channels. Up to 8 bus-compatible model 9250 instrumentation amplifiers can be cascaded on the model 9251 Fieldbus controller.

Continuous flow pretreatment plants are designed for high throughput and consist of cleaning stages (degreasing), rinsing stages and possibly layer-forming processes such as phosphatisation. Continuous flow pretreatment Continuous flow pretreatment plants are universally usable. Their high throughput performances in particular make them interesting for many applications. Spraying rings apply different media to the components as they pass through. In the successive zones, therefore, the parts can pass through a cleaning programme tailored to the particular application that guarantees optimum and constant quality. Rippert builds continuous flow plants for small sheet metal parts up to large-scale drag cleaning with a high quality of workmanship. Multi-channel pretreatment plants are also possible, as is combined pre-cleaning by means of robots.

The NanoWeld stations provide the ideal platform for the development and production of opto-electronic components, like singleand multi-channel transmitters and receivers. The station works with exchangeable trays and grippers accepting all device housing types and lenses, optical fibers or receptacles to be aligned and attached. Cycle times for the rapid mass production of TOSA type assemblies reach less than 25 seconds while it takes several minutes for complex devices.All components and subassemblies to build the NanoWeld station are of highest quality and performance. Even customized systems start from a common platform which minimizes development time and cost. By using device-specific trays and grippers, the time to change between different batch processes or device types is reduced to the minimum. Loading and unloading of these trays is performed on a separate loading station outside of the automated NanoWeld. The automated alignment starts from a known reference position.

The cross-sections of multi-channel capillaries consist of a large number of single holes, which are either in a random order or neatly arranged. Depending on the application in which these capillaries are used they can fulfill several tasks. Materials Soda-lime glass (AR, I860, PH360 etc.) Borosilicate glass (DURAN©, PYREX©, SIMAX© etc.) Aluminum silicate glass (Schott 8252/8253) Process of Production Two different production methods are used to manufacture multi-channel capillaries: 1. Production from a preform Prior to drawing the capillary several performs are mounted and joined together. During this process the channels are created from a single capillary. Hollow spaces are then filled with glass rods and are evacuated with heat. All unintended side channels and hollow spaces between the capillaries are sealed during this process and result in a closed cross-section, which is only punctuated with the inner geometry of the single capillaries. Reproducible profile sizes,...

Non-contacting multi-channel stainless-steel speed sensor, eddy current principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Scanning of all electrically conductive materials (steel or aluminium). Insensitive against mechanical abrasion (metal chips). Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).

Non-contacting multi-channel stainless-steel speed sensor, difference-Hall principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Optionally with current output signal. Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).