Moving it - Import export

“Lift and move” motion profile with multiple stations and long travel lengths. Synchronized movement system with hard anodized profiles. Polyamide nylon wheels with a rack and pinion system manage horizontal and vertical movement. Column modules carry out lifting movement via a recirculating ball screw drive. The column modules are operated with a single geared motor through a transmission with shafts and corner stops. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

Shuttle system for moving robots and heavy loads for long distances with high dynamics. The motion system is available with recirculating ball guides or rollers while the driving system has been designed with rack and pinion. The shuttle is equipped with adjustable ties to achieve alignment even on irregular surfaces. Cable carrier and dampers at the stroke end are included. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

FTA Floating moving end Compensate parallel errors The igus® compensator for gliding applications with E2/000 and small E4.1 energy chains. At moving arms with strong lateral offset the floating moving end provides for a compensation and therefore for a force-free run of the energy chain in the guide trough. This extends the life time of your application. -Small, light and low priced -Compatible with PPDS basic analysis units -The basic ”floating moving end“ can be used with the following chain series: 2500, 2700, 3500, E4.28, E4.32 and E4.42 Max. travel distance:100m Max. acceleration: up zo 50m = 2 m/s 2 | 50-100m = 1 m/s 2

Moving solutions for all who need to transport or lift an object but have no fork lift or crane available Our Lift Trolleys, Lift Tables and Box Tilters will not let you down.

A stationary production aid everywhere where bigger loads have to be lifted or lowered, e.g. as loading table behind compact feed lines Stroke from 800 1600 mm Electrohydraulically driven lifting and lowering, controlled via hand sensor device (Totmann) on a 3m cable.

No more strenuous bending when taking parts out of a container Increases production while reducing sick leave Heavy containers and skeleton containers can be transported as easily as with a pallet truck ´ Container can be tilted hydraulically with a footpump in an angle of 0 90 degrees to achieve the best working position

MOVE cutlery inserts feature simple no-frills linework and square shapes. The combination of fixed elements and movable dividers within the multi-purpose compartments complements the design and introduces greater flexibility to the organization of kitchen drawers. Modern vacuum thermoforming and tool technology make it possible to control the flow of material in the production process to such an extent that a good material distribution is achieved even when handling highly stretched surfaces. The new styling devoid of radii and graduations harmoniously adapts itself to the design of the drawer guidance systems. As one has come to expect from AGOFORM, every carcase size has its own divisions and variants from 300mm to 1200mm width in two different depths. A sturdy construction coupled with hygienic polystyrene makes for a durable, easy-clean product of the highest quality.

MOVE cutlery inserts feature simple no-frills linework and square shapes. The combination of fixed elements and movable dividers within the multi-purpose compartments complements the design and introduces greater flexibility to the organization of kitchen drawers. Modern vacuum thermoforming and tool technology make it possible to control the flow of material in the production process to such an extent that a good material distribution is achieved even when handling highly stretched surfaces. The new styling devoid of radii and graduations harmoniously adapts itself to the design of the drawer guidance systems. As one has come to expect from AGOFORM, every carcase size has its own divisions and variants from 300mm to 1200mm width in two different depths. A sturdy construction coupled with hygienic polystyrene makes for a durable, easy-clean product of the highest quality.

© bekuplast GmbH 2018 - All rights reserved. Legal Notice Data Protection Information General Terms and Conditions

© bekuplast GmbH 2018 - All rights reserved. Legal Notice Data Protection Information General Terms and Conditions

© bekuplast GmbH 2018 - All rights reserved. Legal Notice Data Protection Information General Terms and Conditions

STRONG. SOLID. LONG-TERM ACCURACY - Travelling column machining centers with modular equipment variants and particularly high performance. STABILITY, YOU CAN FEEL! - Combination of extremely rigid & stable machine - High stability during machining - Extremely high rigidity sets new standards for moving column machining centers LONG-TERM ACCURACY - Long-term machining with consistent product quality - High precision even after years of use CUSTOMIZED MACHINE SOLUTIONS - Joint development of your milling strategy - from development to commissioning - Expertise from individual to series production, also automated 24/7 - Possibility of integrated automation FLEXIBILITY THAT INSPIRES! - Wide range of options | rotary table, magnetic table, swivel table, additional magazine, partition wall, etc. - From heavy-duty machining to high-precision finishing of a wide range of materials

The IRCON ScanIR3 infrared linescanner provides real-time, thermal imaging of continuous sheet and web-based processes as well as discrete manufacturing processes. The robust housing includes built-in provisions for water-cooling and air-purge, and features built-in laser sighting. A rugged processor box provides universal input and output capabilities in the field without the need for an external computer. The versatile ScanView Pro software allows for custom configuration of operating parameters and display of thermal images and temperature profiles on a standard PC. Features: Fast scan speed up to 150 lines per second Up to 1024 measurement points per line High optical resolution up to 200:1 (allows for installation further from the measured process with excellent precision) Reliable Ethernet communication (optional fiber optics) Brushless scanning motor Field-replaceable window One bundled sensing head cable with one-click connector to the scanner

designed for various tool interfaces, e.g. HSK, SK, collet chuck slot and short taper equipped with manual or automatic clamping system permanent grease lubrication or oil-air lubrication

Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 72x72 mm, 96x96 mm, 144x144 mm. Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.

Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 60 mm, 80 mm, 100 mm, 130 mm (diameter). Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.

Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 72x72 mm, 96x96 mm, 144x144 mm. Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.

The container roller 4336 movement set can be used for manoeuvring containers on paved ground. The attachment of the rollers may be effected from below into the ISO-corners, the side pockets of the ISO-corners remaining free for other purposes. A Container Roller Set is consisting of: 4 individual container rollers 1 unsteered drawbar

The container roller 4336 movement set can be used for manoeuvring containers on paved ground. The attachment of the rollers may be effected from below into the ISO-corners, the side pockets of the ISO-corners remaining free for other purposes. A Container Roller Set is consisting of: 4 individual container rollers 1 unsteered drawbar

The container roller 4336 movement set can be used for manoeuvring containers on paved ground. The attachment of the rollers may be effected from below into the ISO-corners, the side pockets of the ISO-corners remaining free for other purposes. A Container Roller Set is consisting of: 4 individual container rollers 1 unsteered drawbar

The container roller 4336 movement set can be used for manoeuvring containers on paved ground. The attachment of the rollers may be effected from below into the ISO-corners, the side pockets of the ISO-corners remaining free for other purposes. A Container Roller Set is consisting of: 4 individual container rollers 1 unsteered drawbar

Container rollers with load upstroke for lifting and moving of ISO containers Set of rollers consisting of drawbar and four corner units Rolling up to 6 km/h

MIXACO Container-Mover The container mover enables simple and quick transportation. You will also receive a battery charger in the scope of delivery. The advantages at a glance •Forward and backward movements of the container that do not strain the head due to heavy-duty electric drive •Simple handling •Handle with height adjustment •Adjustable speed •Self-engaging coupling for quick coupling and decoupling without tools

Frequently, a production run starts or ends with the automatic feeding or removal of workpieces. Our feeders and stackers are produced in various capacity levels, with vacuum suction traverses, with or without pit. The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

Venjakob/Nutro offers a wide spectrum of material handling systems, from simple, manual systems to fully automatic "non-contact" operation. Venjakob/Nutro is able to provide customer-specific constructions for automatic feeding and delivery as well as integrate transport devices or material handling robots in the spraying plant. The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

There are often several possibilities to realise automatic accumulation or separation of workpieces in a production process. Venjakob optimises workpiece handling in a customised approach. This picture shows how a drying zone can be shortened by the use of vertical workpiece guidance. Vertical buffer zones are often planned to obtain free movement areas for the production line. The VEN MOVE system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

The processing of both faces of a workpiece requires a professional turning solution. The turning process (Fig. 1) with lane change shown, achieves a very high turning capacity while simultaneously safeguarding the quality of the parts to be processed. Workpiece processing often requires turning from longitudinal to cross and vice versa. A cone and crank rocker linkage represent a simple and safe possibility to turn workpieces. (Fig. 3) The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

At the time of workpiece transfer, a change is made from longitudinal transport to crosswise transport. In contrast to curve conveyors, angular transfer systems operate in cycles. Depending on the requirement, they can be planned as collecting or separating device. Possible configurations include 90° or 180° belt, chain or rake cross conveyors. A rake or crank rocker linkage or an electro-pneumatic control can be used to transfer workpieces from lenthwise to crosswise or vice versa. The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

PowerFlex is designed to be a robust, flexible and reliable conveyor solution for almost any operation requirement. Using its integrated handles and intuitive design, the conveyor can be contorted and shaped to fit into infinite environments. Its braked castors, 240v power supply and renowned latching connections make it an incredibly userfriendly piece of equipment. The PowerFlex SmartFlow platform differs from traditional PowerFlex with its distinct controls functionality. SmartFlow allows for multiple flow control options within one conveyor. Different user operations call for different equipment functionality – SmartFlow puts them all in one place. The selector switch is mounted on the unit’s selfcontained control box, which allows you to switch from 5 varying flow control modes. See below for further details. PFSF also retains all PowerFlex’s renowned functionality – simply connect multiple SmartFlow units to create whatever length is required.