Results for
ROLLON GMBH
Germany
Uniline System is a family of pre-assembled linear units boasting a compact size and high speed ensured by the COMPACT RAIL roller bearings, mounted on a self-sustaining extruded aluminum profile. The linear units are driven by a steel reinforced polyurethane belt system. The horizontal seals and the raceway cleaners fitted on both ends of the carriage ensure full protection from dirt. The linear actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed and life. The rails in the linear axes of the four product series are laid out in different combinations to meet all application requirements. Using long or multiple sliders increases the...
Request for a quoteIGUS® GMBH
Germany
This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.
Request for a quoteIGUS® GMBH
Germany
dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective
Request for a quoteIGUS® GMBH
Germany
dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective
Request for a quoteIGUS® GMBH
Germany
dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs
Request for a quoteIGUS® GMBH
Germany
robolink® drive wheel Connection to motors Drive shaft d4 - d12 with/without feather keyway Material: PA2200 and aluminum 3.5 rope coils = 500 mm Rope way d1 [mm]: robolink® multi-axis joint robolink® Configurator d1 [mm]:
Request for a quoteIGUS® GMBH
Germany
When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern
Request for a quoteIGUS® GMBH
Germany
Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Request for a quoteIGUS® GMBH
Germany
For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Request for a quoteLUTZ PUMPEN GMBH
Germany
Compact and powerful single phase two-value capacitor motor. Light and convenient Quiet and durable With motor protection switch, connection cable and plug Quick motor assembly/disassembly by Lutz hand wheel Type of drive: Electric Explosion Protection: not explosion-proof
Request for a quoteHASPA GMBH
Germany
Motor side connection DIN-Connection Handpiece side connection Claw connection KB Type mm Connection Motor / Handpiece Shaft length m Art.no. shaft Art.no. core Art.no. casing Speed min-1 weight(ca.) g B 6,0 DIN 30/ KB 180 1,50 102 001 112 001 122 001 24000 1000 B 7,1 DIN 20/ KB 180 1,50 102 002 112 002 122 002 20000 1400 B 7,1 DIN 20/ KB 180 2,00 11 020 022 11 120 022 11 220 022 20000 1700 B 7,2 DIN 30/ KB 180 1,50 102 003 112 003 122 003 20000 1400 B 7,2 DIN 30/ KB 180 2,00 11 020 032 11 120 032 11 220 032 20000 1700 B10,1 DIN 30/ KB 180 1,50 102 004 112 004 122 004 16000 2300 B10,1 DIN 30/ KB 180 2,00 11 020 042 11 120 043 11 220 042 16000 2900 B10,2 DIN 30/ KB 250 1,50 102 005 112 005 122 005 16000 2300 B10,2 DIN 30/ KB 250 2,00 11 020 052 11 120 052 11 220 052 16000 2900 B12,0 DIN 30/ KB 250 2,00 102 006 112 006 122 006 12000 4200 B15,0 DIN 30/ KB 310 2,00 102 007 112 007 122 007 5000 6100 Working shafts type C Motor side connection sliede connection GZ Hand piece side...
Request for a quoteLUTZ PUMPEN GMBH
Germany
0.55 kW Compact externally ventilated single-phase three-phase motor with capacitor, 5 m connection cable included and shock-proof plug. The motor is designed in a way that acid vapours or aggressive atmosphere cannot damage it. Light and convenient Quiet and durable Quick motor assembly/disassembly by Lutz hand wheel
Request for a quoteFLUX-GERÄTE GMBH
Germany
The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle. Product attributes: - Sealless in the liquid area - With mains connection - Powerful commutator motor with brushes - Ergonomic design handle - Low weight - Small outer tube diameter - Holding hook for hand nozzle at pump discharge - With integrated holder for the pump Benefits: - Also suitable for transferring smaller quantities - Can pump out of narrow-necked containers - Minimal force required to change drums - With mains connection - enables very long operating times - High operational safety due to overload cut-out switch - Easy single-hand operation - Hand nozzle always quickly at hand due to holding hook - Low storage space required
Request for a quoteFLUX-GERÄTE GMBH
Germany
The new generation FLUX VISCOPOWER progressive cavity pumps for industry and hygienic (pharma, food, cosmetic) applications are suitable for pumping thin to high-viscosity fluids. The displacement pumps work with low turbulence at a constant pressure and provide for a gentle and pulsation-free operation. The VISCOPOWER progressive cavity pumps can be designed for industrial applications as well as for the pharmaceutical, food and cosmetic (Hygienic) sectors. All progressive cavity pumps VISCOPOWER are mobile and stationary, consist of only a few components and are easy and quick to dismantle. There is a choice of versions for immersing in the material and for installing outside the container; versions with explosion protection, 3A certification and FLUX FOOD pumps (Directive (EC) 1935/2004 and FDA CFR 21 compliant). For connection of the motor there is a choice between bearing flange and gear.
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V HD-SR Industrywith circulation/flushing connection for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V HD-SR Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2
Request for a quoteTROTEC GMBH
Germany
The TAC 6500 air purifier is an ideal solution for air extraction and cleaning of working areas that are contaminated with hazardous substances. This device has a maximum air flow rate of 5700 cubic meters per hour.This air purifier has been designed for tough daily use on changing building sites. Since it has an infinitely adjustable air flow, this purifier can be configured to carry out almost any application. Technical details of the TAC 6500 air purifier: Dust class (in accordance with DIN EN 60335-2-69): dust class H (transmission level ≤ 0.005%) for substances with workplace exposure limits ≤ 0.1 mg/m³, carcinogenic substances in accordance with GefStoffV §11, TRGS 905 or 906, approvable for asbestos abatement in accordance with TRGS 519 Max. air flow rate, without filter: approx. 5,700 m³/h Maximum low pressure: 1,240 Pa Recommended amount of air for dust class H: 3,000 m³/h Motor power: 1,270 W Connection voltage: 230 V / 50-60 Hz
Request for a quoteFLUX-GERÄTE GMBH
Germany
The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 1,5 m hose and hand nozzle. Product attributes: - Connection motor and pump via quick-action coupling - Sealless in the liquid area - Small outer tube diameter - Holding hook for hand nozzles at the pump discharge - Low weight Benefits: - Motor easy to remove - Several pumps can be operated in series with one motor - Also suitable for filling smaller quantities - Can transfer from narrow-necked and containers difficult to access - Minimal force required to change drums - Hand nozzle always quickly at hand due to holding hook - Low storage space required
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HASPA GMBH
Germany
Motor side connection DIN-Connection Handpiece side connection SSKA Type mm Connection Motor / Handpiece shaft length m Art.no. shaft Art.no. core Art.no. casing rubber Art.no. casing metal AWS 6/1 DIN 30/ SSK 1 1,25 105 201(M) 105 211 105 221 AWS 6/1 DIN 30/ SSK 1 1,50 105 202 (M) 105 212 105 222 AWS 7/1 DIN 30/ SSK 1 1,25 105 234 (M) 105 244 105 301 AWS 7/1 DIN 30/ SSK 1 1,50 105 208 (G) 105 214 105 228 AWS 7/2 DIN 30/ SSK 7/2 1,50 105 204 (G) 105 214 105 224 AWS 7/2 DIN 30/ SSK 7/2 2,00 105 205 (G) 111 215 105 225 AWS10/2 DIN 30/ SSK 10/2 1,50 105 206 (G) 105 216 105 226 AWS10/2 DIN 30/ SSK 10/2 2,00 105 207 (G) 105 217 105 227 AWS12/2 DIN 30/ SSK 12/3 2,00 105 238 105 219 105 230 AWS12/2 DIN 30/ SSK 12/2 2,00 105 240 105 220 105 231 AWS13/3 DIN 30/ K 3 2,00 105 239 105 229 105 232 Connection types of working shafts - overview
Request for a quoteHASPA GMBH
Germany
Motor side connection DIN-Connection Handpiece side connection DIN-Connection Type mm Connection Motor / Handpiece Shaft length m Art.no. shaft Art.no. core Art.no. casing Speed min-1 weight(ca.) g D 6.1 DIN 20 / DIN 20 1,50 105 001 115 001 125 001 24000 1200 D 6.2 DIN 30 / DIN 20 1,50 105 002 115 002 125 002 24000 1200 D 6.3 DIN 30 / DIN 30 1,50 105 003 115 003 125 003 24000 1200 D 7.1 DIN 30 / DIN 21 1,50 105 004 115 004 125 004 20000 1400 D 7.1 DIN 30 / DIN 21 2,00 11 050 042 11 150 042 11 250 042 20000 1700 D 7.2 DIN 30 / DIN 30 1,50 105 005 115 005 125 005 20000 1400 D 7.2 DIN 30 / DIN 30 2,00 11 050 052 11 150 052 11 250 052 20000 1700 Type mm Connection Motor / Handpiece Shaft length m Art.no. shaft Art.no. core Art.no. casing Speed min-1 weight(ca.) g D10.1 DIN 30 / DIN 30 1,50 105 006 115 006 125 006 16000 2300 D10.1 DIN 30 / DIN 30 2,00 11 050 062 11 150 062 11 250 062 16000 2900 D10.2 DIN 40 / DIN 30 1,50 105 007 115 007 125 007 16000 2300 D10.2 DIN 40 / DIN 30 2,00...
Request for a quoteHASPA GMBH
Germany
Motor side: DIN-connection Handpiece side: Slide connection GS Type mm Connection Motor / Handpiece shaft length m Art.no. shaft Art.no. core Art.no. casing speed min-1 weight(ca.) g S 4/1 GS28 / GS 16 1,25 101 401 111 401 121 401 24000 600 S 4/2 GS28 / GS 28 1,25 101 402 111 402 121 402 24000 600 S 4/3 DIN 30/ GS 16 1,25 101 403 111 403 121 403 24000 600 S 4/4 DIN 30/ GS 28 1,25 101 404 111 404 121 404 24000 600 S 6/1 GS28 / GS 16 1,25 101 601 111 601 121 601 24000 1000 S 6/2 GS28 / GS 28 1,25 101 602 111 602 121 602 24000 1000 S 6/3 DIN 30/ GS 16 1,25 101 603 111 603 121 603 24000 1000 S 6/4 DIN 30/ GS 28 1,25 101 604 111 604 121 604 24000 1000 Type mm Connection Motor / Handpiece shaft length m Art.no. shaft Art.no. core Art.no. casing speed min-1 weight(ca.) g S 7/1 GS28 / GS 22 1,50 101 701 111 701 121 701 20000 1400 S 7/1 GS28 / GS 22 2,00 11 017 012 11 117 012 11 217 012 20000 1700 S 7/2 GS28 / GS 28 1,50 101 702 111 702 121 702 20000 1400 S 7/2 GS28 / GS 28 2,00 11 017...
Request for a quoteETH MESSTECHNIK GMBH
Germany
Metal Bellows Coupling with collet clamps / Hub material: aluminum Backlash-free metal bellows coupling with clamp hubs Hub material: aluminum Alternatively to steel executions we recommend our series KB4AL from size 80 - 500 For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy assembly and low inertia Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 500 Nm
Request for a quoteETH MESSTECHNIK GMBH
Germany
Metal Bellows Coupling with collet clamps, compact Backlash-free metal bellows coupling with compact clamp hubs For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 1400 Nm
Request for a quoteETH MESSTECHNIK GMBH
Germany
Metal Bellows Coupling with collet clamps Backlash-free metal bellows coupling with clamp hubs Hub material: up to 60Nm – aluminum, up from 80Nm - steel For shaft diameters from 10 – 80 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy to assemble Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 1400 Nm
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
The rectifier with built-in current sensor for fast turn-off is designed for the operation of electromagnetic devices. It ensures fast turn-on and turn-off. The rectifier with bridge circuit comprises a thyristor and timer. During overexcitation, the rectifier delivers bridge rectified output voltage before changing over to half-wave rectification. On the DC side, the output voltage is enabled by the built-in current sensor which measures the AC current of the connected motor. If the motor is stopped, the rectifier turns off on the DC side as soon as the current falls below the turn-off threshold. The turn-off voltage generated by the inductive load is limited. The rectifier is suitable for connection in parallel with AC motors. The current sensor must be wired into the motor current path in such a way that the current flow created when the motor operates in generator mode will not pass through the sensor. This is crucial to avoid delayed or impaired DC side switching.
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE material pressure tanks VS are tanks made from stainless steel. All necessary fittings (f.i. two reducing valves) are installed on lid. The lid is equiped with clamping brackets for fast and easy opening and closing. available volume: 2 ltr. Also available with only one pressure reducer. options: air motor stirrer, level reading device, connections for several sprayguns max. pressure: 2,5 bar
Request for a quoteALFRED SCHÜTZE APPARATEBAU GMBH
Germany
SCHÜTZE material pressure tanks of series Vol./.. for better handling of your spray intensions. Ideal for all spray jobs with a low material consumption, f.i. spraying release agents. available volumes: 1; 2; 4; 6; 10; 20 and 40 ltr. materials: 1 - 10 ltr = aluminium 20; 40 ltr. = stainless steel Also available with only one pressure reducer. options: air motor stirrer, level reading device, connections for several sprayguns max. pressure: 2,5 bar
Request for a quoteLEAX DETMOLD GMBH
Germany
This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.
Request for a quoteLEAX DETMOLD GMBH
Germany
This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.
Request for a quoteLEAX DETMOLD GMBH
Germany
This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.
Request for a quoteResults for
Motor connection - Import exportNumber of results
33 ProductsCountries
Company type
Category