Motor connection - Import export

Uniline System is a family of pre-assembled linear units boasting a compact size and high speed ensured by the COMPACT RAIL roller bearings, mounted on a self-sustaining extruded aluminum profile. The linear units are driven by a steel reinforced polyurethane belt system. The horizontal seals and the raceway cleaners fitted on both ends of the carriage ensure full protection from dirt. The linear actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed and life. The rails in the linear axes of the four product series are laid out in different combinations to meet all application requirements. Using long or multiple sliders increases the...

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

robolink® drive wheel Connection to motors Drive shaft d4 - d12 with/without feather keyway Material: PA2200 and aluminum 3.5 rope coils = 500 mm Rope way d1 [mm]: robolink® multi-axis joint robolink® Configurator d1 [mm]:

The TAC 6500 air purifier is an ideal solution for air extraction and cleaning of working areas that are contaminated with hazardous substances. This device has a maximum air flow rate of 5700 cubic meters per hour.This air purifier has been designed for tough daily use on changing building sites. Since it has an infinitely adjustable air flow, this purifier can be configured to carry out almost any application. Technical details of the TAC 6500 air purifier: Dust class (in accordance with DIN EN 60335-2-69): dust class H (transmission level ≤ 0.005%) for substances with workplace exposure limits ≤ 0.1 mg/m³, carcinogenic substances in accordance with GefStoffV §11, TRGS 905 or 906, approvable for asbestos abatement in accordance with TRGS 519 Max. air flow rate, without filter: approx. 5,700 m³/h Maximum low pressure: 1,240 Pa Recommended amount of air for dust class H: 3,000 m³/h Motor power: 1,270 W Connection voltage: 230 V / 50-60 Hz

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

The unrestricted availability of energy is playing an increasingly important role. Highly efficient gas or diesel generators, so-called gensets, are used as power generators, e.g. as emergency power generators in hospitals or as temporary power suppliers in areas that are difficult to access. Another area of application is large data centres, where the unrestricted and uninterrupted availability of electricity must be guaranteed. Gensets ensure the power supply in any situation, even under extreme conditions. Our genset gearboxes are connected between the motor and the generator, so that a frequency adjustment for the required power grid is achieved. It is possible to adjust the frequency from 50Hz to 60Hz as well as from 60Hz to 50Hz. The speed transmission is highly efficient, as the single-stage spur gears guarantee a high efficiency of >99%. The use of a labyrinth sealing system also means that the drives require very low maintenance.

The unrestricted availability of energy is playing an increasingly important role. Highly efficient gas or diesel generators, so-called gensets, are used as power generators, e.g. as emergency power generators in hospitals or as temporary power suppliers in areas that are difficult to access. Another area of application is large data centres, where the unrestricted and uninterrupted availability of electricity must be guaranteed. Gensets ensure the power supply in any situation, even under extreme conditions. Our genset gearboxes are connected between the motor and the generator, so that a frequency adjustment for the required power grid is achieved. It is possible to adjust the frequency from 50Hz to 60Hz as well as from 60Hz to 50Hz. The speed transmission is highly efficient, as the single-stage spur gears guarantee a high efficiency of >99%. The use of a labyrinth sealing system also means that the drives require very low maintenance.