Minis - Import export

Bearing Assembly

Mini croissants w ham & cheese

Mini ham & sour cream tart

Mini apple tart

Danish pastry mini mix, v. of 5

Mini buttercroissants

Stainless steel gear pump for the delivery of alcohols, isocyanates or gels. The exact volumetric dosing of this series guarantees a low-pulsation and constant flow rate. Due to its compact size and high precision, the CHEM MINI is ideally suited for use in laboratories. Parts in contact with the medium can be made of stainless steel or ceramic materials. The series is available in sizes from 0.2-9-5.5 to 2.95-14-28, other sizes are also available on request. The range of application covers classic transfer and dosing tasks in the chemical and pharmaceutical industry. Due to decades of design experience and optimum material selection, this pump type is suitable for even the most difficult tasks and convinces by its reliability and dosing accuracy in vacuum applications.

Our low-cost alternative to manual stamping presses are standardised mini markers with a font size of 2, 3 or 4 mm, 6 wheels with relevant wheel labelling from 0 to 9 as well as an empty field. With the pin stop, the figure combination can be changed in a simple procedure and embossed on a tool to be labelled with manual marking.

Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links Assembly Instructions Application examples Applications in various industrial sectors. E2 mini One-/Two-piece E-Chain® Small pitch for silent operation High torsion resistance Double stop system and large pins for long service life Optimized weight/stability ratio Easy to mount Manifold interior separation Typical industrial sectors and applications Construction machinery Handling systems Installation Packaging machines Textile machines Vehicle construction Wood machines Glass machines Machine construction General mechanical engineering etc. UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request

secutex protective sleeves protect loads and textile lifting accessories against marks left by handling. If an edge exceeds the range covered by the norm, the usual textile lifting accessories can no longer be used in conjunction with the secutex protective sleeve. If the edge radius of a load is less than 2 mm, lifting experts refer to it as a “critically sharp edge“. secuwave and secuwave Mini are thicklycoated protective sleeves with a wave structure on the contact side. The wave structure increases the bending radius of “sharp edges”. The edge lies in a wave trough, while the load rests on the wave peak. Therefore, the “sharp edge“ has no contact with the protective sleeve. secuwave is delivered as a clip. This means that it can be subsequently added to a lifting situation. secuwave is available in two versions. The various sizes mean that the suitable wave size can be used. The smaller wave size means that the thick coating is more flexible in the bending direction.

Our tried-and-trusted bakery goods go mini

Cosmetic PET bottle MAPOL in combination with mini-triggers TS-031 & TS-033 https://www.lindner-kunststoffprodukte.de/wp-content/uploads/2017/12/Lindner_Kosmetik_Seifenspender_Mapol.pdf

other colours upon request

other colours upon request, various trigger designs available

air regulation, needle valve

The mini cylinders of the CH series are cylinders with extremely reduced dimensions. For space-saving screwing, also with O-ring seals, in shaped holes or for panel mounting.

The Laser Mini offers a selective measurement of methane without interfering cross-sensitivities. The device monitors itself and is therefore almost maintenance-free. Thanks to the menu navigation in conjunction with supporting displays of the measurement history, absolute value, etc., the Laser Mini is easy and safe to use even by inexperienced users. The Laser Mini only needs to be switched on.

JDN air hoists mini Carrying capacities: 125 kg, 250 kg, 500 kg, 980 kg Air pressure: 6 bar Standard Features interesting and inexpensive alternative even to hoists with other driving media suitable for lube-free operation suitable for application in hazardous areas (Explosion protection) few components only for easiest maintenance wear resistant motor braking system light weight for easy handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

cartridge type max. clamping force 1.3 kN max. operating pressure 200 bar as per data sheet B1.8271

with long clamping lever cartridge type max. 70 bar, as per data sheet B1.8262

clamping lever with contact bolt cartridge type max. 70 bar, as per data sheet B1.8262

without clamping lever cartridge type max. 70 bar, as per data sheet B1.8262

with long clamping lever cartridge type max. 250 bar, as per data sheet B1.8252

clamping lever with contact bolt cartridge type max. 250 bar, as per data sheet B1.8252

without clamping lever cartridge type max. 250 bar, as per data sheet B1.8252

The Mini Shaft Loader allows you to load short shafts. The loading is done automatically. Do you have remnants of long bar feeder and would you like to process them? Or do you want to load very short shafts automatically? The MSL is the ideal complement for the Multi-3000 to load short shafts. It has a multi-profile loading prism. So you can load round and hexagonal material and all this without changing channels. Special profiles are possible on request. Impact-free recharging thanks to the exclusive recharging cycle. The recharging cycle is based on the patented recharging mechanism of the Multi 3000. After fast and precise bar removal, the material is gently placed on the loading prism. The Mini Shaft Loader is connected to the bar feeder. This takes over the power supply and control of the loading system. The material is fed via the slide of the loading magazine.

The Powder Sampler Mini is a stainless steel sampler for small quantities. When the button is pressed, a sampling rod enters the sample material and retracts when released. In this way, a fixed amount of sample material is enclosed in the sample notch of the rod and removed. The sampler precisely collects 0.01 ml, 0.05 ml and 0.1 ml sample volumes, depending on the version. With an insertion depth of up to 300 mm, multiple target point samples can be collected at different depths. The small-volume powder sampler is made of high-quality stainless steel 1.4404/1.4571 (316L/316Ti). The Mini powder sampler is used for sampling powdery products from small containers, sacks, drums or open containers. Primarily in the pharmaceutical, medical products and biotechnology sectors, e.g. for testing raw materials, active ingredients and excipients.