Link - Import export

ipf cable sockets are used primarily for establishing the electrical connection of sensors. Their features are characterized by rugged design, the highest protection classes (IP67 \ IP68 \ IP69K) and, if desired, with 360° shielding. With the features: bus-ready, suitable for use with drag chains and robots, resistance to oil and chemicals, resistance to welding sparks, their resistance to cleaning agents or high-pressure and steam-jet cleaning, the expanded temperature range of up to +230°C, the rapid interconnection technology and special data transmission properties, the cable sockets meet all requirements in automation technology.

Connecting digital signals directly at the machine can contribute to significant cost and effort minimization. A classic application is the linking of different signals directly in the field. Thus, it is possible to avoid long line paths of many individual devices, which significantly reduces the wiring effort and the need for control inputs. All input signals on the logic modules are visualized by integrated LED and are electrically decoupled from each other. In this way, influences from one device to the other are reliably prevented. The outputs of the modules are overload-proof and the upcoming signal is also indicated by an LED. In addition to logical input signal connections such as AND and OR, versions with signal change control are also available. The ipf logic modules are available for DIN rail mounting or as field modules.

E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems

The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.

As the first weight transmitter for analogue strain gauge load cells, the Link E has a high-contrast touch display that makes it easy to read and easy to find all settings and information. Configuration takes place via your favourite web browser – no additional software required. ‘Smart Calibration’ enables adjustment entirely without the need for weights. This keeps installation and access times to a minimum. The Link E gives you the option to choose from nine widely-used interfaces for any application, including ModBus-TCP, Profibus, ProfiNet, DeviceNet or Ethernet/IP. The Link E is the result of the continued development of the successful PR 5211.

Signal linking of 2 voltages 3-way isolation 1 or 2 analogue outputs Plug-in filter modules 10..10 kHz

The bus-compatible AP10 position indicator serves for monitored format adjustment in order to reduce setup times and enhance machine efficiency.Readability has been optimized to achieve intuitive user guidance. The backlit display clearly indicates target and actual values  two-row position indicator for representing target and actual values and the two LEDs clearly show the direction to be set.  Electronic position indicator with bus interface. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus or IO-Link as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S position indicator. IP53 type of protection, IP65 as an option.

Our enclosed module featuring an internal power supply and printhead driver board, enables communication between the DOD printhead technology and the MPERIA controller through an Ethernet connection. V-Links can be stacked and networked through MPERIA®, providing a flexible and scalable system for small or very large applications.

The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections

The electronic pressure switch DS 350 is interesting for all users in plant and machine engineering, due to the integrated IO-Link interface to exchange process data, diagnostic reports and status messages with a superordinate control level, as standard. In addition, further information can be retrieved that allow conclusions to the application process. Especially in mechanical engineering, great demand for flexible operating conditions have to be satisfied. Features — Nominal pressure from 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.5% / 0.35 % (opt. 0.25 %) FSO — IO-Link according to specification V 1.1 — smart sensor profile — data transfer 38.4 kBaud — indication of measured values on a 4-digit LED display — rotatable and configurable display module — parameter settings via IO-Link or menu (VDMA-conform) — additional information via IO-Link accessible Optional features — different mechanical connections

The pressure transmitter DCT 553P is used in the food and pharmaceutical industries or in applications where a dead space-free process connection is required. A capacitive ceramic pressure sensor developed in-house is used as the basic sensor, which is characterized by a high overload and excellent surface quality. The special design prevents the formation of condensation inside the pressure transmitter and thus failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygienic version — protection IP 67/ IP 69 — high overpressure resistance — diaphragm ceramics Al2O3 (99.9 %) Optional: — different process connections

Check link core

(check link + rivet + clevis door check)

Check link assembly

Check link (plastic coated)

Check link (plastic coated)

Check link (plastic coated)

— Versions for flush and non-flush mounting — AC and DC sensors available — High switching frequencies up to 300 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal and plastic enclosure — Temperature range: -25°C up to +70°C or -40°C up to +100°C — Sensing distances: 10 mm up to 15 mm — Cable / connector versions — 10 – 36 V DC or 20-250 V AC — PNP / NPN or AC versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

— Flush and non-flush mount sensors in stainless steel enclosure 1.4305 — High switching frequencies up to 1000 kHz — Fully encapsulated versions to protection class IP67 — Temperature range: -25°C up to +70°C — Sensing distances: 1 mm up to 2 mm — Cable / connector versions — 10 – 36 V DC — PNP / NPN versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

— AC and DC sensors available — High switching frequencies up to 4000 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal or plastic enclosures — Temperature range: -25°C up to +70°C — Sensing distances: 2 mm to 8 mm — Cable / connector versions — 10 – 36 V DC or 76-250 V AC — PNP / NPN versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

Versa-Link™ stainless steel conveyor belt makes installing your conveyor belt quick and easy! Versa-Link’s Advanced Link Rods join the conveyor belt together in as little as 30 seconds with no tools required. Forged Edge Technology creates an edge that is flush with the side of belt, eliminating any catch points that can damage your belt during operation. With up to 81% open area, Versa-Link™ provides maximum air/liquid flow through capabilities that is great for frying, cooking, coating, and cooling applications. Versa-Link™ is USDA Accepted, with a clean-in-place design that saves time during sanitation.

L - 140 mm, B - 80 mm, D - 17 mm | Gewicht 0,8 kg Aufhänge-Ring (Master Link) | 4,0 t Tragkraft | Güteklasse 10 | für 1-Strangkette 10 mm, 2- Strang 7+8 mm

The 8B standard manifolds in various designs and materials. Due to the special design, several manifolds can be easily connected in series. Depending on the application, the media can be either distributed directly or shut off as required using the appropriate fittings.

The Scotch-Yoke drive of the DTL series has a modified link drive characteristic and reduces the slide speed during the forming phase. Thus the presses are not only suitable for cutting, punching and forming tasks, but also for drawing operations. The extra time that the material receives for plastic flow significantly increases the quality of the produced parts. The reduced impact speed of the slide extends the life of the press and the die. Overview: ● Press capacity: 6,000 - 30,000 kN ● Part size: large ● Slide kinematics: link ● Application: as a single press system either as progdie or transfer mode, as well as a press line Description and benefits: ● The outside located pressure points and a long 8-fold slide guiding system well compensate off-center loads, spare press and die and ensure a constant part quality. ● The automatic centralized lubrication system increases pro-ductivity and availability.

Compact presses for a wide range of medium sized parts. Due to its drive-related slide kinematics, the MCL series is particularly suitable for drawn parts. Overview: ● Pressing capacity: 3,000 - 8,000 kN ● Component size: medium ● Slide kinematics: link ● Applications: stamping, drawing, forming Features and benefits: ● The compact design requires little floor space and no foundation at presses below 4,000 kN. ● The very solid, low-stress annealed press bodies are FEM-calculated and optimized by so-called “hot-spot analysis” in areas which are subject to higher loads. ● Motor, clutch/brake unit, lubrication system and control are of German origin and guarantee a long service life and maximum dynamics. ● The slide guiding system ensures a high level of tilting rigidity and reduces the cutting impact during the cut through when it comes to the processing of higher-strength materials.

Electrostatic Innovations from Eltex have been creating safety in hazardous areas for over 60 years: Controlled electrostatic grounding protects production sites and employees when handling highly flammable and explosive substances. During filling or decanting processes involving potentially explosive liquids or materials, the Eltex Terracompact II automatically identifies faulty, disrupted or defective ground links in the installation. Any disruption in the ground links results in an automatic shutdown of the process. The Terracompact II is a standard enclosure for mounting on DIN 46277 top-hat rails for installation in a control cabinet or a control room.

Bush conveyor chains are often used for conveying tasksinvolving long transport distances at relatively low speeds. Since only a small minority of chains used in the industry are totally compliant with one specific standard, ELITE conveyor chains are custom-made to a specific customer order and consequently fulfil a large number of special requirements. ELITE highlights: • Pins usually made of heat-treated alloy steel, inductionhardened • Bushes made from seamless precision steel tube, case-hardened • Link plates made of high-strength tempered steel or case-hardened steel alloy • Rollers (where present) made of case-hardened steel, case-hardened

The Motion06 Manual Sorting Belt Conveyor is used in those places where bulky luggage is collected centrally from the various luggage lines and prepared for inspection. As a special solution, it can be adjusted to a huge range of conditions, such as conveyor height, positioning of the control system, belt lengths, conveying direction or conveying speed. The heart of the sorting belt is formed by two plastic link conveyors, which are characterised by a very smooth and wearresistant surface and have a far longer life span than roller tables that have been used in the past. The individual pieces of luggage are transported to a certain position by the electronic link conveyor and then manually pushed off in the direction of the conveyor. This procedure makes the work of airport personnel considerably easier.

For heavy-duty applications Rotary chains are roller chains with cranked links. The cranked links give the rotary chain greater elasticity to withstand shock loads. Main application areas for rotary chains: Excavators Tracked vehicles Drilling rigs