Joints - Import export

The central idea of high pressure tools is to concentrate the energy of a high pressure water jet at the smallest possible point to maximise its effect. The smaller the area to be sprayed, the slower the process will be on large areas. The solution is to move the high pressure water jet quickly and systematically. Rotating joints allow the water to be transferred from fixed to rotating parts of the high pressure tool so that the water jet is moved in a targeted manner. KAMAT rotary joints are suitable for pressures up to 4,000 bar. They can be driven by internal or external energy and can reach up to 3,000 revolutions per minute. For fatigue-free and safe working, we also offer easy-to-use swivels for high pressure hoses, suitable for our high pressure pumps. Also designed and manufactured in-house, these swivels are internally streamlined to minimise flow restrictions.

universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite ballbearings (can be relubricated) no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air 10,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 190 °C water steam heat transfer oil air SPEED MAXIMUM 700 1/min NPT thread 1500 1/min ISO 228 thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

Highquality stainless steel hose joints from HJS to be welded into the exhaust system yourself. With this hose joint you get a highquality and longlasting decoupling of the exhaust pipes.

Universal joints for steering. The joints are maintenancefree and permanently lubricated.

Stainless steel barrel screw joint with a R 2" steel fine outer thread for tubes dia. 32 mm.

These are the pipes made from aluminum,which as the connector to connect the parts.

Rotationally symmetrical driving gears in a line producing for automotive industry are mutually connected by electron beam welding. The camera inspection carried out until was not able to assess the quality of the weld seams at the required precision. Non-contact laser measurement system Particular Challenge: As the welding seams show a high reflectivity and are located at a position hard to access, inspection is difficult, all the more so as they dispose of a width of only 500µm. Therefore it is quite a challenge for the laser measurement system. The QuellTech solution: A QuellTech Laser Scanner Q4-5 with extremely small shape factor and high resolution proved to be perfectly suited for this application. In order to suppress reflections from elements in the surroundings, a particular algorithm has been integrated. Furthermore, this laser measurement system features a particularly adapted laser wavelength and an ultrafine laser line.

igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm Most important features: Very low weight High tensile forces Combinable with rod end bearings of the dimensional series E vibration dampening Noise dampening Available for left-hand and right-hand threads igubal® clevis joints are solid polymer made of igumid G according to DIN 71752, which can be combined with the rod end bearings of the dimensional series E as counterpiece. They consist of clevis joint, pin and circlip, or alternatively with spring loaded pin. igubal® spherical bearings application examples When to use it? When high stiffening is required When freedom from corrosion is desired When lubrication should not be used When you want to save weight When maintenance-free dry operation is desired When the easiest installation should be implemented When combinations with pneumatic cylinders and gas struts should be implemented When not to use? When temperatures above +200°C prevail When dimensions over 20 mm are needed igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm

DOF* rotating Can only be used as the first joint in a system. Material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) *degree of freedom Balls: DOF* rotating Can only be used as the first joint in a system. Material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) *degree of freedom Balls:

Oscillatory robolink® joint - optional with angle sensors material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) Balls: Oscillatory robolink® joint - optional with angle sensors material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) Balls:

igubal® - WGRM Angle joint for rotating and pivoting motions igubal® - WGRM igubal® low-cost angle joint Low-priced connection, many combination options igubal® low-cost angle joint igubal® axial joint AGRM For all mechanical combinations igubal® axial joint AGRM igubal® AGRM LC, AGLM LC Many combination potentials igubal® AGRM LC, AGLM LC igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints adjustable Fixed position spherical bearings, clearance- free movement of the ball pin adjustable Replaceable Reduce costs and time with removable ball pins Replaceable igubal® - WGRM Angle joint for rotating and pivoting motions igubal® - WGRM igubal® low-cost angle joint Low-priced connection, many combination options igubal® low-cost angle joint igubal® axial joint AGRM For all mechanical combinations igubal® axial joint AGRM igubal® AGRM LC, AGLM LC Many combination potentials igubal® AGRM LC, AGLM LC igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints adjustable Fixed position spherical bearings, clearance- free movement of the ball pin adjustable Replaceable Reduce costs and time with removable ball pins Replaceable

robolink®-2-axial joint: Weight: 400 g max. load: pivoting 12 Nm, rotating 5 Nm Pivot angle: 180° (+180°/0°) Rotation angle: 340° (± 170°) Material: Fine polyamide PA 2200, VA screws, Dyneema ropes, aluminum HC bearing (alternativ iglidur® J) A = rotating ±270° | B = pivoting ±180° - 0° C = rope run

robolink®-based joint: Bearing ring rotation on the basis of PRT-01-50 iglidur® J gliding elements rotating on aluminium HC Weight: 1.250 g max. load: privot 20 Nm, rotate 10 Nm Pivoting angle: 180° (± 90°) Rotation angle: 180° (± 90°) Material: Fine polyamide PA 2200, VA screws, Dyneema ropes, aluminum HC bearing (alternativ iglidur® J) A = privoting ±90° B = rotating ±90°

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe brass (rotor stainless steel) small diameter ceramic seal CDCartridgeDesign PRESSURE MAXIMUM 10,0 bar water TEMPERATURE MAXIMUM 90 °C water SPEED MAXIMUM 1000 1/min NPT thread 3500 1/min ISO 228 thread SIZEDN 10 (3/8") DN 15 (1/2") DN 20 (3/4")

single inlet/outlet line rotor + housing, material stainless steel tungsten carbide/tungsten carbide seal 160,0 bar hydraulic oil water TEMPERATURE MAXIMUM 90 °C hydraulic oil water SPEED MAXIMUM 1500 1/min DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 315 bar DN 32 (1 1/4") DN 40 (1 1/2") 350 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") Stainless steel 100 bar DN 32 (1 1/4") DN 40 (1 1/2") 160 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") PRESSURE MAXIMUM Steel 42CrMo4 315 bar DN 32 (1 1/4") DN 40 (1 1/2") 350 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") Stainless steel 100 bar DN 32 (1 1/4") DN 40 (1 1/2") 160 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed short length SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") DN 350 DN 400 DN 500 DN 600 DN 700 DN 800

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding track similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM 40 bar Stainless steel 100 bar Steel 42CrMo4 SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 16 bar DN 350 DN 400 DN 500 DN 600 DN 700 40 bar DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") Stainless steel 6 bar DN 350 DN 400 DN 500 DN 600 DN 700 16 bar DN 125 (5") DN 200 (8") DN 250 (10") DN 300 (12") SIZEDN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") DN 350 DN 400 DN 500 DN 600 DN 700

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 100 bar DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") 250 bar DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") 350 bar DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") Stainless steel 40 bar DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") 100 bar DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12")

steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding track similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM 40 bar Stainless steel 100 bar Steel 42CrMo4 SIZEDN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

universal useclamping/release elastomer seal lightweight construction small size PRESSURE MAXIMUM 9,0 bar air vacuum TEMPERATURE MAXIMUM 90 °C air

segment design low weight self supportingno additional support necessary sealing PFTECompound good sliding properties low stickslip effect PRESSURE MAXIMUM 9,0 bar air vacuum TEMPERATURE MAXIMUM 90 °C air

segment design low weight self supportingno additional support necessary sealing PFTECompound good sliding properties low stickslip effect PRESSURE MAXIMUM 9,0 bar air vacuum TEMPERATURE MAXIMUM 90 °C air

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 80 1/min 50 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar