It direct - Import export

- Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

For directional and non-directional bores, For pipe lengths up to 18 m, For bores up to 3 m beneath the ground water level, Maximum outer diameter of the bore hole up to 1400 mm, Maximum lengths up to 120 m, A variety of different bore heads, rock boring heads or in-hole-hammers are available, depending on the soil quality.

The energy market called for technical solutions contributing to a mains stabilization and benefiting from the potential of favourable energy prices at the same time. The warm water boilers can be delivered in a power range from 35 kW up to 1.2 MW whereas the hot water boilers are available with a capacity of max. 10 MW. By means of parallel or series connection of several systems the power range can be extended optionally. The functional principle of warm and hot water boilers relies on the direct heating of flowing water via numerous resistance heating elements. For control purposes, they are summarized in groups which are either switched in steps or triggered infinitely variable via a thyristor power controller.

Klöpper Therm electric flow boilers are used for generating hot water in heating units for direct heating, storage operation or for Power to Heat systems. As an alternative to other energy types in new buildings or when converting central heating units, these boilers offer a universal range of applications radiator heating, floor heating, mixed systems or bivalent operation with other energy types. Depending on the relevant operating conditions of the energy supplier, the boilers are used for direct or storage heating by utilising free electric power during off peak times.

CSN® tank heating units are particularly suitable for the direct heating of liquids (Oil, Water, Emulsions), air and gases. They contribute to the avoidance of paraffin clouds in fuel oil or Diesel storage tanks. In relation to the process, we provide you with tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. We offer our series “THF” a suspended, on a chain flexible solution to keep heating oil or diesel fuel in the extraction line pumpable. As a fixed version, we recommend our industrial immersion heaters for heating liquids. Further information about our CSN® Tankheizkörper

The VY solenoid valves are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.

The pneumatically operated directional valves VK are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.

With our delivery program “Screws for direct screwing” we deliver a great variety of thread rolling screws in different implementations. In doing so we realize small lot sizes and short-term delivery dates. Upon request we also introduce customer-oriented warehousing also in your company. Apart from the many advantages you can save time and money. We provide: KTG screws for thermoplastic materials: single pass thread or double pass thread (high/low); head shapes with cross or 6-star (similar Torx). Tapping screws: longitudinal slot, cross slot, cross-head-combination slot or 6-star (similar Torx). DIN 7981, 7982, 7983 or to the new ISO standards; special tip-styles, e.g. with with pressed washer. Combination screws with undetachably washers: According to DIN 6901. Self-tapping screws: According to DIN 7500. Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry...

10 mm width, three different electrical connection possibilities. Optionally with manual override operation.

10 mm width, three different electrical connection possibilities. Optionally with manual override operation.

10 mm width, three different electrical connection possibilities. Optionally with manual override operation.

10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible.

Rotary tables with direct drive series RT3 The rotary tables with direct drive are available in different types: RT3A100x100, RT3A100x155, RT3A080x130, RT3A150x100, RT3A150x130, RT3A250x170, RT3A200x060 und RT3G630x225 Rotary tables RT3G630 – high dynamics, high precision, high loading capacity This direct driven rotary table RT3G630 has particularly been developed for machine tool industry and assembly machines. It is characterised by its high precision, highdynamics and its high loading capacity. The rotary table is driven by a permanently excited 3-phase synchronous motor. The rotary plate and the housing are made of gray cast iron.

These valves can be supplied in a wide variety of standard versions, e.g.: in three different base shapes (standard, flange and screw-in base), with connection for plug-in socket prefabricated or with flying leads, as 2/2 way NC or 3/2 way NO/NC, also available as low watt version and with nominal orifice of 0.5, 1 or 1.5 mm. For plug-in sockets, current indication and erasing diode please see valve accessories.

These valves can be supplied in a wide variety of standard versions, e.g.: in three different base shapes (standard, flange and screw-in base), with connection for plug-in socket prefabricated or with flying leads, as 2/2 way NC or 3/2 way NO/NC, also available as low watt version and with nominal orifice of 0.5, 1 or 1.5 mm. For plug-in sockets, current indication and erasing diode please see valve accessories.

10 mm width, three different electrical connection possibilities. Optionally with manual override operation.

10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible.

10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible.

10 mm width, three different electrical connection possibilities. Optionally with manual override operation.

Our VD series solenoid valves are mounted to save space on a manifold battery output with 2 to 10 valve positions as standard.

Our special solution for labeling fresh, moist or greasy food: Manufactured from a material approved for food. Water and grease resistant properties and printable in thermal transfer process. Suiting your needs we realize your individual label in true Bizerba quality. Bizerba labels for direct food contact safely and reliably fulfil their function: Our ISEGA-tested solution can be safely applied to your fresh, moist or even greasy food. Bizerba offers you various solutions: For multicolored preprints, paper or film labels with a permanent, special acrylate-based adhesive can be used. Another alternative with particularly resistant properties is our polyethylene film-based synthetic paper label. It combines the print quality of coated paper with the robustness of a high performance film: The label is tearproof and resistant against water, grease and chemicals.

Depending on type, multi-directional dampers can be loaded in every axis. In our standard vibration dampers of the GDZ series two all-metal cushions are installed. Depending on the assembly, these cushions are load with pressure or tension. Vibration dampers of the series 7 have another cushion obstructed which allows them to absorb load in horizontal direction additionally. Because of this, GDZ dampers are perfectly suitable for applications in the fields of plant engineering and rail vehicle construction. Our product range includes three different types of these multi-directional dampers: GDZ series 1 for a fixation with bolts for pressure and tension load GDZ series 5 for a welding fixation for pressure and tension load GDZ series 7 for a fixation with bolts for pressure, tension and horizontal load

Bearing assemblies with direct drive are suitable for applications where high performance and low space requirements are important criteria. The integration of the drive into the bearing housing means that wear-prone assemblies for transmitting drive power, such as toothed belts, shafts or chains, can be dispensed with. This reduces the required drive energy and also benefits more accurate positioning.

10 mm width, three different electrical connection possibilities. Optionally with manual override operation.

10 mm width, three different electrical connection possibilities. Optionally with manual override operation.

Direct acting valve, 15 mm width, two individual electrical connection possibilities.

These valves can be supplied in a wide variety of standard versions, e.g.: in three different base shapes (standard, flange and screw-in base), with connection for plug-in socket prefabricated or with flying leads, as 3/2 way NO/NC valve (2/2 way on request), also available as low watt version and with nominal orifice of 0.5, 1, 1.6 or 2 mm. For plug-in sockets, current indication and erasing diode please see valve accessories

These valves can be supplied in a wide variety of standard versions, e.g.: in three different base shapes (standard, flange and screw-in base), with connection for plug-in socket prefabricated or with flying leads, as 3/2 way NO/NC valve (2/2 way on request), also available as low watt version and with nominal orifice of 0.5, 1, 1.6 or 2 mm. For plug-in sockets, current indication and erasing diode please see valve accessories