Results for
TAVRIDA ELECTRIC
Germany
Custom designed tool for primary and secondary injection testing of Rec15/25 protection and automation functions.
Request for a quoteMERECS ENGINEERING GMBH
Germany
As an NI Alliance Partner, we use NI TestStand and NI LabVIEW for test automation. Python, C/C++ Embedded and Microsoft PowerBI can be used in addition. NI-TestStand is the industry standard test management software and is used by the developers and architects at Merecs Engineering with a lot of experience. We offer for example the following services: - Requirements analysis based on the DUT properties to be tested - Development of test cases in cooperation - Sequence development in TestStand - Intuitive custom user interfaces - Parallel testing of many DUTs & Badge Testing - Reporting (SQL databases etc.) - Trainings & Workshops Our developers hold the CLA (Certified TestStand Architect) and CLD (Certified TestStand Developer) certificates.
Request for a quoteATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The 220 is a large capacity lightfastness tester dedicated for textile testing. It comes with premium on-rack light and temperature sensor and non-aging optical filter technology. With the ability to test 38 samples, the 220 provides nearly twice as much capacity in the same footprint compared to 150S+. The combination of its large test chamber and the efficient use of power and water make it today’s most economic air-cooled instrument available. It complies to standards ISO 105 B02, AATCC TM16 (option 3), and Marks & Spencer C9, C9A. 1x 2200 W air-cooled Xenon Lamp 2310 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Direct Setting and Control of Irradiance (300-400 nm) Direct Setting and Control of Black Standard Temperature Direct Setting and Control of Chamber Temperature Direct Setting and Control of Relative Humidity Display of Diagnostic Message Storage for 10 user-defined tests Multilingual User Interface Non-aging filter systems for ISO 105-B02 and AATCC TM16 On-rack XENOSENSIV® for measuring and controlling irradiance (in W/m²) and Black Standard Temperature on sample level Selectable temperature control either by Chamber Temperature (up to 65 °C) or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 100 °C) simultaneously Fan-controlled temperature difference between Chamber and Black Standard Temperature Ultrasonic humidification system with integrated 60l water reservoir for humidity control (automatic refill) Sample rack suiting 19 sample holders with capacity for 38 standard textile samples Pre-programmed standards ISO 105 B02 and AATCC TM16-2004 (Option 3) Switch-off by radiant exposure, light exposure or total operating time UV-protected test chamber window Advanced Auto Start functions Internal memory chip for storing instrument data Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) XenoCal BB 300-400 XenoCal BB 300-400 BST XenoCal BST
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Xenotest Beta+ FD is a premium stand-alone rotating rack xenon instrument with 4000cm2 exposure area. It’s completely target designed to meet the testing needs of the FMCG industry, such as drinks, foodstuffs, personal care or household products. Beta+ FD enables consumer goods manufacturers to test their products realistically within very short test times, typically with acceleration factors between 10-50 versus real time. It’s for reliable qualification of stable product formulations, determination of appropriate packaging materials, and supporting product shelflife claims. Beta+ FD offers two custom racks - a bottle rack and a packagings rack. Both carry loads up to 20 kg and fit various packaging shapes and sizes. Economic non-aging filters guarantee realistic simulation of all three common light conditions - outdoor Daylight / indoor Daylight / Supermarket light, while a chiller keeps test temperatures on realistic levels even at high irradiance. Programming and monitoring can be done online. 3x 2200 W air-cooled Xenon Lamps 4000 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Direct setting and control of Irradiance (300-400 nm) or (300-800 nm) Direct Setting and Control of Black Standard Temperature (BST) Direct Setting and Control of Chamber Temperature (CHT) Display of Diagnostic Messages Storage for 10 user-defined test methods Multilingual User Interface Test chamber with rotating rack technology; for application-specific specimen racks Thermal insulation of test chamber and periphery preventing water condensation Non-aging XENOCHROME filters to simulate outdoor daylight, daylight behind window Optional StoreLight filter to simulate supermarket light conditions On-rack XENOSENSIV 300-400 nm or 300-800 nm sensor for measuring and controlling irradiance (in W/m²) and BST (C°) on sample level Selectable Temperature control either by CHT (10° *- 70°C; *with chiller) or by CHT and BST (25° * - 120°C) simultaneously (dual control) Fan-controlled temperature difference between Chamber and Black Standard Temperature Chiller SunCool Beta+ for extended CHT- and BST-ranges towards lower temperatures UV-protected test chamber window Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Internal memory chip for storing instrument data Data output via memory card or RS 232 interface Ethernet interface for connection to internal computer network and use of XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“)
MERECS ENGINEERING GMBH
Germany
Development and construction of test systems for environmental simulation, i.e. climate and temperature tests as well as corrosion tests (e.g. MEMS testing and automotive durability tests on tilt sensors, inclination sensors, inertial sensors, inclination sensors, automotive parts and many more). - Adjustable humidity - Typical temperature ranges are -72 to + 120°C - Parallel testing and calibration of more than 100 DUTs simultaneously per test run - Various interfaces to the DUTs can be switched like CAN, LIN, Flexray etc. - Database connection and automated data analysis using Microsoft PowerBi can be added.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TAVRIDA ELECTRIC
Germany
Custom designed tool for secondary injection testing of Rec15/25 protection and automation functions.
Request for a quotePROXOMED® MEDIZINTECHNIK GMBH
Germany
Interfaces To the proxomed test and training systems as well as to external patient management systems such as Theorg (Thedex) or KIS (HL7) Functional modules proxOS connect tergumed proxOS connect IPN-Test Suite proxOS connect MediMouse proxOS connect Biodex S4 proxOS connect MFT S3-Check proxOS connect goldenage proxOS connect HL7 proxOS connect Thedex proxOS connect mobile proxOS connect SmartPanel proxOS connect evaluation station proxOS connect proxonetwork proxOS connect proxotrain
Request for a quoteFRIWO GERÄTEBAU GMBH
Germany
Enable-Tool NG Professional is used for the adjustment and maintenance of our control units in development, production and after - Read error memory - Setting of a limited number of parameters per control unit - Creation of signed data records for production and aftersales - User roles (developer, production, service) for controlling vehicle projects in larger organizations with a dealer network - Creation of signed data records for production and aftersales - Storage and transmission of data sets - Interface to End-of-Line Test Additional information •Interface: USB •System requirements: Microsoft Windows, Dualcore CPU @ 1.8 Ghz, 2GB RAM, 100MB HDD •Read fault codes: Service and developer •Change parameters: Developer •Create datalog: Service and developer •Create data snapshot: Developer •Transfer data snapshot on a certain OEM ECU: Service •Transfer data snapshot all OEM ECUs: Developer •Connectivity: Active online connection
Request for a quoteResults for
Interface test - Import exportNumber of results
9 ProductsCountries
Company type