Industrial system - Import export

The industrial system Ti3000 will get more than 1.5% more yield as compared to other systems at the tried and tested FESSMANN quality! Completely made of stainless steel and built steamtight out of panels, the Ti3000 is universally usable according to your specific needs. The central unit technology also convinces with its flexibility and best circulation air outputs at short process times.Panel construction and central unit technology for best air and process outputs Higher flexibility in implementation of customerspecific product requirements by smooth fan speeds Higher system capacities by faster process times = higher yield Use of all known supply trolleys for industrial use possible Use of "overlength" supply trolleys and transport frames Automatic door opener serially included Automatic CIP cleaning system serially included

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

The industrial smokehouse Ti7000 delivers impressive quality in impressive time! The special air guidance flap of the system ensures that the same conditions prevail everywhere in the system at any time during the process, even with doublerow loading. Double row construction for highest capacities Use of trolleys up to a width of 116 cm (46") Special air guidance flap for highest product uniformity Automatic CIP cleaning system with particularly effective rotary nozzles FOOD.CON 2 control as standard for best process control

Flottweg has developed a unique centrifuge concept especially for the high-level dewatering of sewage sludge: The Flottweg Xelletor series. For the wastewater treatment plant operator, dewatering offers enormous savings potential. The costs for transport and disposal of dewatered sewage sludge often account for 80% of the operating costs of mechanical dewatering. The dewatering performance of the Xelletor machine is significantly better than that of our predecessor models. And it's setting new standards in terms of throughput, dry substance, and polymer and energy consumption.

Flottweg C series decanters around the world process 25 million liters of sewage sludge per hour. The dewatering and thickening of sewage sludge plays a decisive role in the wastewater treatment process. Requirements for the quality and efficiency of sewage treatment plants increase year after year, not least driven by the increasing costs of energy and disposal. As a result, the state of the art is now to use decanter centrifuges to dewater and/or thicken the incoming sludge. Flottweg developed the decanters of the C series especially for this purpose. The C7E represents the largest of all the C machines. The C7E increases the proportion of dry substance in the sludge, thereby reducing its volume and weight (due to loss of water). That means that operators need to dispose of, recycle, or burn less sludge. The result: enormous potential savings for the operators of sewage treatment plants.

The requirements for the dismantling parts are just as high as for the actual body. The surfaceCONTROL 2500 is used for the defect detection of attachments and interior parts. This enables the objective and reproducible identification and classification of defects. The surfaceCONTROL 2500 is used, for example, to inspect small parts such as fuel filler flaps, to detect defects on cockpit elements or for inspection in the press shop.

ATMOSPHERIC PRESSURE, MAINTENANCE FREE AND PROTECTED AGAINST EXTERNAL EFFECTS The pressureless gas storage system of Lipp is used for the storage of gas produced on landfill sites, waste water treatment plants and also as external storage on biogas plants. The system is determined by its robust and technical advanced construction where the gas balloon is protected by a galvanized steel tank. This protects the balloon against UV light and also other external factors. The system is mostly utilized at landfill sites or WWTP to buffer the gas before its further processing. The experience gained during the past decades has improved the complete system and the single components and makes it a perfect choice for end users and general contractors.

Dosing and mixing systems in the personal care industry are characterised by high plant safety and flexible handling. With IFA systems for the personal care industry, the main focus is on the processing of a large number of different raw components and hygienic cleaning after a recipe change. Mixing and dosing systems supplied by us range from semi-automated to fully automated production lines. IFA Technology considers your individual requirements and builds customised plants and systems for the personal care industry.

The double diaphragm pump 2" PVDF explosion-proof is suitable for large-scale industry and system feeding as well as for large flow rates and higher viscosities. * typical applications: Filter press, tank cleaning system, pigment dyes and resins * integrated silencer up to model size DMP 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & benefits * high hydraulic performance * maintenance-optimized design and easy installation * self-priming (even when dry) * absolutely oil-free * blockage-free operation * Pumps explosion-proof in accordance with ATEX directive (explosion protection)

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

Since the foundation of IFA Technology GmbH, we have been active in the paper industry. Our systems for liquid dosing and solids dosing systems are used in paper production or water treatment and enable you to optimise your processes. With our dosing systems for paper finishing we offer a wide repertoire for the production of paints and impregnating resins. Application of plants and systems for the paper industry: Storage, mixing and dosing of liquids such as impregnating resins, adhesives and release agents Solids dosing with the aid of preparation stations Dosing systems for printing inks

Proven know-how meets state-of-the-art technology. This is the best way to describe the new Flottweg decanter C series. We also have the optimal solution for the very large wastewater treatment plants. The combination of our own Simp Drive® drive system, which has been in use since 1994, and Recuvane®, which allows flexible and simple retrofitting as well as targeted discharge of the centrate water, sets new standards for Flottweg in separation technology.

Innovationen sind Flottweg Spezialität. Unsere Xelltorbaureihe spiegelt Erfindergeist, langjährige Erfahrung und technisches Know-How in einer Maschine wieder. Auf Kläranlagen ausgelegt ist die X5E für mittelgroße Kläranlagen die optimale Lösung, wenn es um Schlammentwässerung und Schlammeindickung geht. Die Kosteneinsparung hinsichtlich Entsorgung und Transport ist für viele Kläranlagenbetreiber der ausschlaggebende Punkt, sich für den Flottweg Xelletor zu entscheiden.

Honored with the German Innovation Award 2019, the Xelletor series is one of the greatest achievements in the field of sewage sludge. Dewatering sewage sludge is standard for wastewater treatment plants and since it usually has to be transported away, operators have an interest in separating as much water as possible from the sludge. This saves weight and thus reduces costs. Savings of up to 10% in sludge volume and 34% in energy consumption are possible. Our Xelletor high-performance centrifuge inspires customers all over the world with the many years of technical know-how and innovative spirit behind it.

The requirements for the attachments are just as high as for the actual car body. The reflectCONTROL surface inspection system, familiar from car body inspection, has been adapted to the fast and high-resolution surface inspection of largely flat attachments. It recognizes and classifies the defects in an objective and repeatable way. Thanks to the large measuring field, trays can be measured in many cases in just a single capture.

The surfaceCONTROL 2500 measuring system is used for defect detection on diffusely reflecting surfaces. In combination with robots, the surfaceCONTROL 2500 is used for fully automatic defect detection on body shells. This system works according to the method of fringe light projection. By means of a learning process, local form defects such as bumps, dents, etc. are reliably detected, while permissible deviations are tolerated. The surfaceCONTROL systems consist of sensor, robot, computer and software and interface package. Different versions of the system are available, which are configured according to customer-specific requirements. The number of reflectCONTROL sensors and robots required can be flexibly adapted to the required throughput.

reflectCONTROL Automotive enables the fully automatic inspection of painted car bodies. The robotic systems enable the detection, three-dimensional measurement and classification of typical paint defects such as inclusions, craters, runners, etc. This enables robot-based automatic processing of the defects, up-stream analysis to identify the sources of defects, and laser-based marking for possible manual processing of the defects. The reflectCONTROL systems consist of sensor, robot, computer and software and interface package. Depending on the requirements, different versions of the system are available, which are configured depending on the customer's needs. The number of reflectCONTROL sensors and robots required can be flexibly adapted to the required throughput.

IFA Technology supplies customised plants and systems for the food and luxury food industry up to complete turnkey solutions. Reproducibility and accuracy are the hallmarks of our plants and systems in the food industry and the luxury food industry. Another focus is on hygiene and diligence: Plants from IFA Technology are made of high quality stainless steel and use food grade materials and FDA approved (Food and Drug Administration) components. The plant components and their functions are adapted to the necessary requirements of the end customers and fulfil the requirements of the specific certifications.

Customers worldwide use Datapaq® temperature profiling and monitoring systems with their powder coating equipment in automotive and industrial powder coating to optimize product quality, reduce waste and prove compliance with ISO9000. When standard and specialty systems will not meet your exact application requirements, Datapaq will build a custom system using Insight™ thermal profiling software, an extensive range of custom barriers and thermocouples, as well as the Datapaq DP5 and Datapaq TP3 data loggers. In addition, Datapaq offers a complete thermal profiling system for real-time data analysis -TM21 Radio Telemetry System. Oven Tracker Insight Software Datapaq powerful Insight analysis software has been designed specifically to convert raw temperature data into meaningful information that can be used to understand, control and optimize your cure process. Complex calculations are simplified, allowing quick and comprehensive analysis.

We know the requirements and wishes of our customers and business partners very well. For this reason, apart from high product quality, great importance is attached to professional project management in particular. Only in this way can construction schedules and completion dates be complied with and projects completed to the full satisfaction of the customer. FLEXIBILITY AND PROFESSIONALISM, WORLDWIDE Lipp understands the requirements of this industry through countless projects in cooperation with German and international engineering offices and plant engineering companies. In addition to professional management of a project, customers pay particular attention to the flexibility of the system and timely execution. These include not only the individual design and assembly but also leak tests that are requested for acceptance. Our professional project management, and technical process expertise, which goes beyond pure container construction

Description: The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * also available in the Pure version (5244-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2

As a generator for industry systems, the Sonic Digital HS3 convinces with space-saving mounting options on the long or narrow side, high degree of efficiency, and compatibility with other components. Optional PROFIBUS and PROFINET interfaces allow for easy integration it central systems and remote access.

Within the chemical industry, systems can only seldom be optimised using offtheshelf solutions. Generally speaking, all TC structures are developed in accordance with DIN EN ISO 14122. Certification according to DIN EN ISO 90012015 confirms the excellence of our quality management. The pultruded GRP construction profiles from Exel Composites comply with EN 13706/E23. We advise you on site and can accommodate your wishes in terms of corrosionresistant access systems. We provide design, manufacture and assembly on site, all from a single source.

The compact MEMDOS SMART LP stepper motor pump combines the size advantages of a solenoid diaphragm dosing pump with the precision of a motorised diaphragm dosing pump. This pump is available in five performance ranges, making it suitable for different applications. The drive of the MEMDOS SMART LP is fully controllable, which allows the stroke frequency to be continuously adjusted and thus ensures precise dosing. The ability to integrate the pump into sophisticated automation networks is particularly noteworthy. A version with an Ethernet-based MODBUS interface is available for this purpose, allowing seamless communication and control within modern industrial systems.

Explosion protected high performance cartridge heaters for heating of liquids (oil and others), solid bodies or gas Plastics industry: hot runner systems, extruder heating Heating of metal pieces, such as moulds or tools. Heating of valves, nozzles or other parts of machinery Analysis technology Lube oil heaters for small machines.

With the Saphir-System we develop industry- and user-specific custom systems. This flexible machine concept is capable to provide the tailored solution to the most demanding application. The system is designed and built to DIN ISO 9001 and ready to use. It consists a sound proof enclosure, index table and all features per request like IO/NIO check or the possibility to perform different welding processes sequentially.

The capaNCDT CST6110 is a capacitive rotation speed sensor system for counting tasks and rotational speed measurements of any type. The industrial measuring system consists of a dust proof, water tight controller and a compact sensors which can be integrated in confined spaces. The rotation speed sensor is used in centrifugal test benches, balancing machines, generators and engines, as well as shafts and drives. The CST6110 detects and counts blades, gearwheels and nubs with the highest precision and stability even in dusty, oily environments.

• 2.4 mm up to 6.4 mm Ø alu and copper • Up to 6 mm Ø steel & 5 mm Ø stainless steel • Up to fl ange diameter 11.4 mm • Rivet body lengths above 30 mm • Traction power up to 11,770 N (6-7 bar air pressure) • Cost effective from an annual quantity of around 500.000 blind rivets (related to the german market) • Up to 50 % time and costs savings compared to standard blind rivet devices • Rivet pistol has a large action radius • No trained personnel required for operation • Can be easily integrated into fully-automatic production systems • Up to 40 blind rivets can be processed every minute • Electronic system controls • Maintenance display & simple fault diagnosis • Customer-specifi c software modifi cation is possible • Rivet mandrels are disposed of by vacuum system • Optional Spring loaded trigger system • Interface for external memory programmable control system (SPS) can be realised via GESIPA® interface

Industrial inkjet printers enable flexible, contactless and cost-effective marking of packaging, goods and pallets. They are suitable for various substrates and applications without disrupting the production process. Inkjet printers create the printed image by selectively releasing ink droplets and offer easy maintenance, a large distance between the print head and substrate, variable print content and flexible integration. Important selection criteria include production environment, size of print image, resolution, surface texture of the substrate, space and line speed. Matthews Marking Systems uses various inkjet printing processes and offers inks for porous and non-porous surfaces. The printers are suitable for many materials, including wood, plastic, metal, pallets, tires and corrugated cardboard. They can be adapted to individual space requirements and offer solutions for both dusty and clean production environments.