Results for
J.D. NEUHAUS GMBH & CO. KG
Germany
UH 100 JDN Ultra-Low Monorail Hoists Carrying capacities: 4 t up to 100 t Air pressure: 6 bar Standard Features ideally suited for working in hazardous areas (explosion protection) insensitive to humidity, dust and temperatures from -20°C up to +70°C extremely low headroom favourable air consumption available also with increased spark protection
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
EH 25-H JDN Hydraulic Monorail Hoists Carrying capacities: 20 t up to 100 t Our hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are existent. Standard Features predestined for application in explosion-endangered areas (Explosion protection) super-silent encapsuled and robust gear motor integrated overload switch-off only two supply connections at hoist “P” and “T”, leakage oil drained internally
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
EH 100 JDN Monorail Air Hoists Carrying capacities: 10 t up to 115 t per unit According to application JDN Monorail Hoists can be deployed as Double Lifting Gear: working in parallel as for example in BOP handling systems or working in tandem connected by a coupling rod as for example for handling grinding rollers in the cement industry. Two versions, for each of the 75 and 100 tonne lifting capacity products in the EH range are now available in both double trolley as well as the previously available 4 trolley traverse drive versions. The new twin trolley drive versions, which offer more compact units for operation where limited space is available, are designated as EH 75 C and EH 100 C. Standard Features ideally suited for working in hazardous areas (explosion protection) insensitive to humidity dust and temperatures from -20°C to +70°C low headroom, compact design favourable air consumption world wide service Special Features If you don’t find the right hoisting system for...
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
EH 20-H JDN Cryogenic Hoists Not only for the BOP Handling under arctic conditions The JDN Hydraulic Monorail Hoists are suitable for operation with cryogenic hydraulic oil and work efficiently in a temperature range from -45°C to +40°C. Advantages Temperature range -45° C up to +40° C Hydraulic drives Smooth starting of the drives due to preheating device Operation with cryogenic hydraulic oil Tested under real conditions and in operation in Siberia
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
PROFI 6 TI Subsea JDN Subsea Hoists The ultimate tool for every professional diver PROFI subsea hoists are a versatile and indispensable tool for professional divers and are suitable for horizontal work as well as for oblique pulling. Advantages Air or hydraulic drive Infinitely variable speeds can be regulated sensitively With overload protection Very versatile, also suitable for horizontal and oblique pulling thanks to hook suspension
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
PROFI 6 TI-H JDN Hydraulic Hoists PROFI Carrying capacities: 3 t up to 100 t Our hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are existent. Standard Features predestined for application in explosion-endangered areas (Explosion protection) super-silent encapsuled and robust gear motor integrated overload switch-off only two supply connections at hoist “P” and “T”, leakage oil drained internally
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
BBH 1000-2 JDN Big Bag Handling Air Hoists JDN big bag handling air hoists are available at carrying capacities of 1100 kg and 2200 kg with an air pressure of 6 bar. Designs with one or two load hooks With one load hook for cross beams. The large distance between the hook and the chain box is particularly advantageous. This guarantees that there is no danger of collision between the load and the chain box. With two load hooks for more complex multi-point cross beams or simple rod cross beams with two means of suspension. Standard Features Particularly suited for use as big bag handling hoists and for the movement of all kinds of bulky loads due to the extreme low construction height. Compact, modern design. Usable as synchronised hoist in two-hook design. Very economical and reliable due to the use of proven JDN serial components. No additional motor lubrication required. Fewer parts for operation free of maintenance and wear. Chain box included in standard...
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
LMF JDN Low Headroom Trolleys The trolley for areas where headroom is restricted Carrying capacities: from 0,5 t up to 6,3 t When only very low headroom is available we recommend the JDN-Ultra-Low Monorail Hoists. Standard Features State of the art by using JDN Air Hoists PROFI TI as well as a new driving motor Low-maintenance and low-wear operation of the motors by means of a reduction of components No additional motor lubrication required 2-step travelling speed Changeable track width * Advantages Able to negotiate curves Longer cross beams to improve the minimum headroom even with bulky loads Options Rack and pinion drive Spark-resistant package Offshore paint Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose Hose trolleys * Please contact us.
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
PROFI 6 TI LM JDN Trolleys Carrying capacities: up to 20 t as manual trolleys (LN) for pushing or pulling the trolleys by hand as reel chain trolleys (LH) for moving the trolleys by unwinding the reel chain as motorised trolleys (LM) powered by an air motor Standard Features easy to install with anti-climb and anti-drop devices robust and with little maintenance able to negotiate curves Options Rack and pinion drive 1 Spark-resistant package 2 Offshore paint 2 Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose 1) From LM 3.2t upwards 2) Not available for LN 1t
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
M 63 D JDN Air Hoists M Series Carrying capacities: 1 t up to 6 t Air pressure: 4 bar Due to their multiple applications they are nowadays also deployed in most different industrial fields. Basically they have the same features as the hoists of the PROFI series but operate with an air pressure of 4 bar only. Two different control systems are at your disposal. Standard Features suitable for application in hazardous areas with danger of explosion (Explosion protection) two chain falls for alternate working specially suitable for horizontal pulling
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
JDN air hoists mini Carrying capacities: 125 kg, 250 kg, 500 kg, 980 kg Air pressure: 6 bar Standard Features interesting and inexpensive alternative even to hoists with other driving media suitable for lube-free operation suitable for application in hazardous areas (Explosion protection) few components only for easiest maintenance wear resistant motor braking system light weight for easy handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option
Request for a quoteJ.D. NEUHAUS GMBH & CO. KG
Germany
JDN Air Hoists PROFI 3 TI up to PROFI 100 TI also available as hydraulic hoists. PROFI 3 TI JDN Air Hoists PROFI Carrying capacities: 250 kg up to 100 t Air pressure: 4 bar or 6 bar Standard Features suitable for application in hazardous areas (Explosion protection) sensitive infinitely variable speed control for the precise positioning of loads easy operation suitable for lube-free operation frequent switching and extended duty cycles low maintenance low headroom, lightweight sound absorption insensitive to dust, humidity and temperatures ranging from -20°C up to +70°C from 1 t upwards with overload protection (EC-version) Technical Details fail-safe starting conditions, low maintenance vane motor chain sprocket in the mid section runs in dust proof maintenance free ball bearings planetary gear in long life grease lubrication, all teeth made of tempered or hardened high grade steel chain and hook of high quality tempered steels with a breaking strength of five times the...
Request for a quoteDEMAG CRANES & COMPONENTS GMBH
Germany
Demag chain hoists meet all the requirements of state-of-the-art hoist units, such as high productivity, efficiency, safety and reliability, and give you the certainty of a secure long-term investment. We develop and produce materials handling solutions for all industries and companies of all sizes, from small workshops to major industrial corporations.
Request for a quoteGEDA GMBH
Germany
The furniture is packed and now it is all about carrying it up and down the stairs. But it doesn’t have to be exhausting at all – with the GEDA furniture hoist, moving is easy and relaxing, and most of all: very easy to your back. A furniture or inclined hoist is an enormous help to transport bulky material on construction sites or during a removal. The external lift can transport heavy furniture and boxes to and from the upper stories. Even the fifth story of a building can be accessed easily to perform fast removals. This saves time, and furniture removers or construction workers won’t suffer from joint and back pain.
Request for a quoteGEDA GMBH
Germany
The permanent installed material hoist GEDA 1200 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The GEDA VARIO-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 1500 kg and a lifting height of 9 m/min, the GEDA 1200 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.
Request for a quoteGEDA GMBH
Germany
Wherever heavy loads have to be transported to great heights, the new GEDA BL 2000 P ensures the required efficiency in the industry. With a load capacity of 2000 kg or 23 persons and a max. lifting speed of 40 m/min, this permanent passenger and material hoist is the new powerhouse from GEDA. The fixed platform size of 3.20 x 1.45 x 2.10 m also allows transport of bulky goods up to a height of 250 m. For added comfort and operating convenience, the hoist is equipped with comprehensive state-of-the-art control variants. The GEDA BL 2000 P is perfectly tailored to the requirements in rough industrial environments. Maintenance and repair work can be conducted efficiently with the permanent passenger and material hoist.
Request for a quoteGEDA GMBH
Germany
The single mast transport platform GEDA 1200 Z/ZP represents an alternative to the well-known GEDA uni-mast system platforms. Its maximum load bearing capacity of 1500 kg or up to 7 people makes this single mast platform the ideal hoist for transporting people and materials. he load bearing capacity depends on the platform variant that is used. You can choose between 3 different platforms variants: — platform “A“ 1.4 x 2,0 x 1.1/1.8 m, load bearing capacity 1500 kg — platform “B“ 1.4 x 2,6 x 1.1/1.8 m, load bearing capacity 1200 kg — platform “C“ 1.4 x 3,2 x 1.1/1.8 m, load bearing capacity 1000 kg — platform “C 1500 kg“ 1.4 x 3,2 x 1.1/1.8 m, load bearing capacity 1500 kg You can also have equipped your transport platform with a roof.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEDA GMBH
Germany
GEDA's “electrical scaffold“, the mast climbing platforms GEDA MCP 750 (single mast platform) and MCP 1500 (twin mast platform) are convincing in many ways. Contrary to ordinary platforms, these mast climbing platforms are easy to handle. They can be assembled and dismantled without any problems. For the assembly of the pedestal, grid-supports for standard scaffold components, scaffold coatings, guardrails and toe boards are used. This means economic use in several ways. You can save money through short put-up and dismantling times and you can save your time through multiple-shift usage. Innovative technology in modular system! The well-known GEDA steel mast segments with captive screws allow for easy assembly directly from the platform. Their manifold advantages are low investment costs, high safety and stability, not much effort for assembly, space saving transport as well as proper storage.
Request for a quoteGEDA GMBH
Germany
These vertical aluminium hoists have already proved their many ways of application for various kinds of use thousands of times. They are easy, quick and reliable transport units for interior work, refurbishment or repairs on flat roof buildings. GEDA can offer the appropriate load receptacle for any kind of building material and any kind of use. Save time and strength by using a GEDA inclined hoist! Transportation elevators are useful for every work – indoor and outdoor. The ladder systems can be used to transport all kinds of materials to the upper levels of a building. For moving furniture, interior constructions, façade renovations or the restructuring of flat roofs, inclined lifts offer the perfect assistance. Due to the movable end, the transportation goods can easily be unloaded from the platform. This prevents back pain and facilitates the work.
Request for a quoteGEDA GMBH
Germany
New concepts for new markets is the banner under which the Bavarian construction and industrial hoist manufacturer GEDA-Dechentreiter GmbH & Co. KG presented a new personnel and material hoist, especially for markets outside Europe: The new GEDA SBL 2000. In contrast with other, variably adjustable hoist solutions from GEDA, the new GEDA SBL 2000 is therefore only available in a fixed platform size of 3.20 x 1.45 x 2.10 m, a standard load capacity of 2000 kg and 23 people, as well as a hoist speed of 55 m/min and a discharge head of 250 m. The title “Made in Germany” also stands for quality outside Europe. According to GEDA Managing Director Johann Sailer, it is important to stress in this context that with the GEDA SBL 2000 a product optimally tailored to meet the needs of target markets outside European has been developed and manufactured entirely in Germany. The GEDA SBL 2000 is available both as a single and a twin cabin.
Request for a quoteGEDA GMBH
Germany
The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.
Request for a quoteGEDA GMBH
Germany
GEDA industrial elevators guarantee the smooth, efficient and safe transportation of people and materials precisely where they are required. Even in the toughest of conditions, GEDA products score highly with customers due to their unique quality and modern car design. The versatile deployment sites of GEDA industrial elevators cover cement works, asphalt mixing plants, chemical plants through cooling towers and silos to offshore plants and explosion-protected areas. Industrial elevators create huge time and cost savings due to efficient workflows in maintenance and service work. The GEDA Standard elevator range covers load capacities from 400 to 3,200 kg. The modular design also provides the customer with the choice of different car dimensions and hoisting speeds of up to 60 m/min. Whatever demands an elevator must meet every GEDA industrial elevator, whether a transport platform or personnel and material hoist or pure material hoist, can be perfectly adapted to on-site conditions.
Request for a quoteGEDA GMBH
Germany
GEDA's “electrical scaffold“, the mast climbing platforms GEDA MCP 750 (single mast platform) and MCP 1500 (twin mast platform) are convincing in many ways. Contrary to ordinary platforms, these mast climbing platforms are easy to handle. They can be assembled and dismantled without any problems. For the assembly of the pedestal, grid-supports for standard scaffold components, scaffold coatings, guardrails and toe boards are used. This means economic use in several ways. You can save money through short put-up and dismantling times and you can save your time through multiple-shift usage. Innovative technology in modular system! The well-known GEDA steel mast segments with captive screws allow for easy assembly directly from the platform. Their manifold advantages are low investment costs, high safety and stability, not much effort for assembly, space saving transport as well as proper storage.
Request for a quoteGEDA GMBH
Germany
Inclined hoists from GEDA have been produced for decades. Their reliability makes them a favourite transport device for roofers and construction workers. These aluminium hoists have already proved their many ways of application for various kinds of use thousands of times. They are easy, quick and reliable transport units for interior work, refurbishment or repairs on flat roof buildings. GEDA can offer the appropriate load receptacle for any kind of building material and any kind of use. Save time and strength by using a GEDA inclined hoist! Transportation elevators are useful for every work – indoor and outdoor. The ladder systems can be used to transport all kinds of materials to the upper levels of a building. They enable a maximum height of 19 m and lifting speeds between 19 m/min and 38 m/min. For moving furniture, interior constructions, façade renovations or the restructuring of flat roofs, inclined lifts offer the perfect assistance.
Request for a quoteGEDA GMBH
Germany
Two units in one: a building hoist with a load bearing capacity up to 850 kg or a transport platform for a maximum of 5 people and loads up to 500 kg. The transport platform GEDA 500 Z/ZP offers a simple and good-value transport system for materials and people with a spacious transport platform, which is not closed on the top. The well-know GEDA steel mast segments stand for easy assembly directly from the transport platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. In order to prevent people from falling down, hot-dip galvanized landing level safety gates with mechanically locked sliding doors are installed to all loading and unloading points.
Request for a quoteGEDA GMBH
Germany
The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened.Assembly is not carried out from the roof.
Request for a quoteGEDA GMBH
Germany
The permanent installed material hoist GEDA 850 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The well-know GEDA UNI-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 850 kg and a lifting height of 9 m/min, the GEDA 850 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.
Request for a quoteGEDA GMBH
Germany
The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened. Assembly is not carried out from the roof.
Request for a quoteGEDA GMBH
Germany
The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened. Assembly is not carried out from the roof.
Request for a quoteResults for
Hoists - Import exportNumber of results
77 ProductsCountries
Company type