Grinding machines - Import export

The RVU grinding machines set new standards in highprecision machining and are especially suitable for high precision grinding applications in the bearing and aerospace industries. The range can be equipped with up to four watercooled grinding spindles which can achieve a performance of 45 kW at 18,000 rev/min. (according to the type of grinding wheel selected) The RVU facilitates a complete machining processing without interruption as optional dressing units, grinding wheel changers and workpiece measurement are available. Additional options for hard metal machining boring and workpiece measurement increase the possible applications of the machine series considerably.

Fewer rejects thanks to high concentricity and axial runout accuracies (< 2 μm) Wide manufacturing range thanks to precise and powerful table drive (torque motor) Increased productivity through complete machining in just one setup

The gauges from the VSL Series measure the form, diameter, roundness and eccentricity of the rolls during the grinding process with very high precision. Form, radial run-out and eccentricity are measures with a precision of ± 1 µm. If an interface is available, they communicate online with the controller of the roll grinding machine and thus enable even more cost-effective use of the grinding machine. With the appropriate configuration, they measure the height and lateral alignment of the roll in the grinding machine before grinding, often enabling the set-up time to be significantly reduced. Vollmer produces the automatic roll measuring gauges for both bench-mounted machines where the roll is moved along the grinding wheel and for support machines where the grinding wheel is moved along the rotating roll. Vollmer supplies the systems for a broad spectrum of roll diameters.

The traversable straddle gauges are used for offline measurement. They are placed onto the roll and moved manually, thereby measuring the form of the rolls from crown edge to crown edge. They are characterised by a high measurement point density of 1 mm and a high repetition accuracy of ± 2 µm. With the evaluation software optimised over decades together with our customers for this application, curves can be pivoted and superimposed, centered and smoothed. The scope of supply also includes a panel PC.

Rigid machine for heavy duty belt grinding. The machine can be adjusted for horizontal or vertical position. Various options include: Dust extraction, chamfering device, angle guide roller, longitudinal stop.

The directly driven dividing apparatus of the TA3 series are excellent suited for the exact positioning of workpieces or, due to the high speeds, also for round machining of workpieces. The direct drive is absolutely backlash-free and ensures highest dynamics. All dividing apparatus are equipped with an automatic, pneumatically actuated clamping system. The dividing apparatus TA3G180 can be optionally equipped with an automatic hydrodehn clamping system (hydraulic expansion technology). Field of applications Rotation axis for angle positioning of work piece carriers in: Processing centers CNC - grinding machines Tool machines Laser processing machines, etc.

CNC controlled machine for belt grinding and polishing stainless steel weld seams. Belt grinding on the contact wheel or slack belt unit is possible for edge profiling.

The 72711 belt sander offers all benefits of the 72780 series but with only one side. It is made for heavy duty applications. For sitting or standing operation. Variable cutting speeds from 900 to 2,800 Rpm. Optionally with frequency converter.

Heavy duty polishing and belt grinding jack. For belt linishing, grinding and polishing of surgical instruments, faucets, castings and other work pieces.

This how each cut is made Sheet metal is available in a very wide range of materials and alloys. The criterion for machining is a given toughness and strength to make the metal sheets deformable. A part of sheet metal machining is separation by shearing, in which the sheets are divided by two shearing knives. For over 40 years, we have supplied shearing knives in lengths up to 4,190 mm in qualities and hardnesses specially matched to the purpose for the corresponding machines. By using peripheral grinding machines, we can comply with the tightest form and position tolerances, which is why so many machine manufacturers rely on the quality of our shearing knives.

The best MB20 that we have ever had. What‘s new? • Higher speed of up to 34,000 rpm for finer, more precise work. • The motor is protected from overloading by an automatic cut-out. • Restart protection provides a high degree of safety. • Prolonged motor life through optimum dust protection. Inexpensive to purchase and maintain. Safe to operate. • Cost-effective universal motor in a sturdy plastic shell. • Automatic cut-out if wear occurs to the carbon brushes • Soft start. • Degree of protection: IP 20, Protection class: II Specifically designed for versatile use in mould making • Constant speed under load. • Uses various quick-change hand pieces for milling, grinding, polishing, brushing and filing. • The machine can be operated standing upright or suspended from a hook.

Developed for slight to heavy grinding and milling for tool and mold making, as well as for deburring, fettling and brushing work in foundries, container and steel construction and mechanical workshops. The lightest and most compact machine in its class for the toughest jobs. * Unbeatable power-to-weight ratio with 2.8 kW at 34 kg. * Ultra-strong asynchronous motor ("continuous runner") with top efficiency. * Indestructible, absolutely maintenance-free, virtually no wear. * Particularly suitable for large tool diameters. * Ideal for working on large surfaces. * Motor overload protection. * Constant speed under load. Comfort and safety features: * Wide range of possible combinations for shafts and handpieces. * Machine can be operated free standing, on table stand or on travelling stand. * Restart protection. * Soft start. * Protection class: IP 55, protection class: I

The unique belt guide system allows the use of very small belt widths without the belt coming off the roller. The tensioning system ensures continual tension in the belt thus contributing to the safety of the guide system. Available in lever or rotary valve variants. Individual work through the rotatable head. Furthermore it has a protective cap for safe handling.

Milling, grinding, brushing, polishing, filing – and all with a single device! This all-rounder is suitable for use in almost all sectors of industry The best results are achieved through digital sensorless control electronics. This ensures: * Consistently high torque at any speed between 5,000 and 15,000 rev/min. * Constant speeds at different loads. * Retrieval of power reserves: at maximum load a remarkable peak power of 1.5 kW. Above this the machine is shut down by the overload protection. * No pulsation in the low speed range. * Work results in smoother surfaces. Low maintenance costs and no unnecessary downtime * The motor is protected from overloading by an automatic cut-out. * Automatic cut-out if wear occurs to the carbon brushes. * Fully encapsulated sensorless electronics cannot be clogged with metallic particles. * Electrical surge protection prevents current peaks and protects the motor. Delivers the highest attainable degree of occupational safety and comfort.

It is not only being able to change the belt so quickly that makes this belt grinder so distinctive. You can grind an area using the telescopic arm and then change to grinding a point on the rubber roller with the fixed grinding arm. This can be done very easily with a clamping screw. In addition, the machine is available, entirely in accordance with your requirements, with grinding arms for belt widths of 8, 15 or 20 mm. Changing them is easy and requires little effort.

Your project is in the best hands at SCHOCK. Our experienced engineers use state-of-the-art methods to plan all resources and guarantee on-time production. In addition, we supervise your tool over its entire life cycle. In mold and tool making, we work with high-quality milling machines, wire and die-sinking EDM machines, and modern CNC-controlled grinding machines.

The power and performance you need to drill deeper and faster Buildin silencer Reversible Variable speed adjustment Rubber grip reduces chilled hand

Sands to a clean finish and more in less time. Compact and light. Light sanding with piston movement A compact, lightweight and economical unit having amazingly low air consumption. Built rugged for long continuous hours of operation. Incorporates no gears and other complicated mechanisms

Superlight, Quiet New lowvibration sander Small and Lightweight for Comfort and Convenience Free Sander fits the hand like a glove. It's humanengineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots. Minimized Hand Vibration The turbine motor of FS100C and the singleball air motor of FS50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

Superlight, Quiet New lowvibration sander Small and Lightweight for Comfort and Convenience Free Sander fits the hand like a glove. It's humanengineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots. Minimized Hand Vibration The turbine motor of FS100C and the singleball air motor of FS50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort Available with NV(No Vacuum), CV (Central Vacuum) or SV (Self Vacuum) Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts.

Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort For Self Vacuum & Central Vacuum Available with NV(No Vacuum), CV (Central Vacuum) or SV (Self Vacuum) Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces Arm and Shoe size 20 x 520 mm avaiable BABY BELTON Compact and lightweight, yet powerful. Alternative rotation direction. Ergonomically designed for right or left hand operator convenience.

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces BABY BELTON Compact and lightweight, yet powerful. Alternative rotation direction. Ergonomically designed for right or left hand operator convenience.

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces The Idle Pulley for B20CL is supported on one side only

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces The Idle Pulley for B20CLA is supported on both sides

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces

Excellent for sanding on narrow, confined, and hardtoreach areas with three types of pads. Compact, Lightweight and low Vibration