Results for
LEBEN-DÄMPFUNGSTECHNIK GMBH
Germany
The damping fluid used by LEBENDämpfungstechnik GmbH is used with different consistency under the name COMPENSOL®. Each damping medium can be chosen to meet the requirements. We provide the ideal hydraulic oil (socalled medium) for use in temperaturecontrolled indoor areas up to extreme high temperatures or low temperatures. For special applications, e.g. at temperatures above +80° C or below 40° C, we use a pastelike dispersion as damping medium. This medium solidifies at rest to an apparently solid mass and only becomes flowable under the action of force. When the load ends, it returns to its apparently solid original state. This dispersion has the following properties chemically a colloidal solid dispersion physically a nonNewtonian pseudo plastic Bingham fluid with viscous properties It is a paste or better a coagulation structure and deforms plastically under mechanical stress.
Request for a quoteERC ADDITIV GMBH
Germany
ERC Soot Guard assures a permanently stable flame and soot-free, economical and environmentally-friendly combustion of heating oil in oil heating systems. THE EFFECT Soot is normally not a problem for modern oil heaters, except for oil heaters, where it may bring about high consequential costs. As a rule of thumb, a 1-mm-thick layer of soot on the boiler wall inhibits the heat transfer to the hot water to the extent that the heating oil consumption increases by approx. 4% with a consistent heat requirement. The main cause of soot is a poor and incomplete combustion of heating oil due to low oxygen levels. ERC soot guard relieves this and is simply added to the heating oil. THE RESULT ERC soot guard's catalytic effect is released in the flame and re-establishes optimal soot-free conditions. Consumption and costs are reduced and the impact on the environment as well as on the wallet is reduced, too. ERC soot guard works in more than just the flame.
Request for a quoteERC ADDITIV GMBH
Germany
Guard Thermic 3000 HP slows the natural ageing of heating oil and keeps energy stores, pumps, burners, and lines clean for high efficiency and operational reliability. THE EFFECT The newly developed heating oil additive ERC Guard Thermic 3000 HP significantly slows the ageing process of heating oil and prevents sediments. Energy stores, pumps, burners and lines remain clean and the heating system operates with the highest efficiency and operational reliability. Consumption and harmful emissions are reduced with clean combustion. In addition, ERC Guard Thermic 3000 HP increases the thermal stability and the storage life of heating oil. Deposits which are already present are also dissolved. ERC Guard Thermic 3000 HP is formulated such that sediments are slowly dissolved in small quantities and burned with the heating oil without leading to faults in the heater.
Request for a quoteERC ADDITIV GMBH
Germany
Guard Thermic 3000 slows the natural ageing of heating oil and keeps energy stores, pumps, burners, and lines clean for high efficiency and operational reliability. THE EFFECT The newly developed heating oil additive ERC Guard Thermic 3000 significantly slows the ageing process of heating oil and prevents sediments. Energy stores, pumps, burners and lines remain clean and the heating system operates with the highest efficiency and operational reliability. Consumption and harmful emissions are reduced with clean combustion. In addition, ERC Guard Thermic 3000 increases the thermal stability and the storage life of heating oil. Deposits which are already present are also dissolved. ERC Guard Thermic 3000 is formulated such that sediments are slowly dissolved in small quantities and burned with the heating oil without leading to faults in the heater.
Request for a quoteERC ADDITIV GMBH
Germany
ERC Guard Thermic for low-sulphur heating oil with a bio share and all other DIN heating oils slows the natural ageing of heating oil and contains an organic combustion enhancer. The Effect ERC Guard Thermic slows the natural ageing of heating oil. Stabilisers prevent components of the heating system from releasing into the heating oil and forming sediments, and/or accelerating the ageing of the heating oil. In the process, select active ingredients neutralise the ions already in the heating oil and apply a protective coating to the metal surfaces, which suppresses the release of new ions and protects against corrosion. In addition, the additive prevents the formation of resin-like, adhesive ageing products which arise due to the high thermal load of the heating oil within the pump and can block it. At the same time, lubrication of the pump is improved.
Request for a quoteERC ADDITIV GMBH
Germany
ERC Guard Kinetic supplements light heating oil with additional characteristics which optimise it for stationary engines and enables the operation of diesel CHPs with more affordable heating oil. THE EFFECT ERC Guard Kinetic was specially developed for combined heat and power plants and other stationary engines which can be operated with any type of less expensive heating oil instead of diesel. The exclusively formulated combination of active ingredients lends the heating oil the characteristics which it lacks for effective and gentle operation in diesel engines. ERC Guard Kinetic is suitable for all heating oil types with a bio share of up to 20% and improves the characteristics of standard diesel. The heating oil with additive is primarily used for combined heat and power plants, from the macro to the mini, to the future micro CHPs designed for individual homes.
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
Flexible pressure hose for petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with aromatic content up to 50% Diesel fuels, heating oils, mineral oil-based hydraulic oils. Barrel-polishable hose with very narrow bending radiuses and easy handling. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned *) Version as tank cleaning hose. Resistant to all customary cleaning agents. Supplied by the roll or cut to length. Other versions and dimensions on request.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
For tar or hot bitumen at temperatures from –25°C to +200°C. With additional spiral for maximum safety and highest possible flexibility. Construction: Special NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral abrasion-resistant CR-cover interior and exterior smooth, fabric patterned Please follow the safety regulations for bitumen hoses! Tar spraying hose Bitumen hose Sold by the roll or cut to length with cuffed ends and/or widened hose endings. Also available as heatable version or per DIN EN 13482. Other versions and dimensions on request.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
Delivery hose for crude oil, lubricating oil, diesel oil, petrol and other fuels up to an aromatic content of 50%. Steam cleaning max. 120°C / max. 60 min. Wide range of applications. Kink and abrasion resistant due to vulcanized hose fittings. With 3 or 4 times burst pressure safety. Temperature resistant from –35°C to +110°C. Slight elongation at full load. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral weather-resistant, abrasion-resistant, conductive CR cover Interior smooth, exterior fabric patterned Depending on the application and customer needs, dock hoses are supplied with built-in flanges. Flange dimensions per DIN, ANSI (ASA) or as special bore. Other versions conforming to DIN EN 1765, BS 1435 or other standards and pressure stages on request. Other versions and dimensions on request.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
For all types of mineral oil products, especially technical oils and lubricants, petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with an aromatic content up to 50%, diesel fuels, heating oils based on mineral oil. Highly flexible and robust finish. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Concealed steel spiral Optional: Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned Supplied on rolls or cut to length. Other versions or dimensions on request.
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
For all types of mineral oil products, especially technical oils and lubricants, petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with an aromatic content up to 50%, diesel fuels, heating oils, hydraulic oils based on mineral oil. Barrel-polishable, vacuum-constant finish. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil & petrol-resistant, conductive NBR tube Tension and pressure resistant fabric inlays Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length. Also available as spiral hose. Other versions and dimensions on request.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
For oil, petrol, diesel fuels
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Electrical process flow heaters The “STR type electrical process flow heater comprise a large range for industrial application custom built to meet client specification. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LUTZ PUMPEN GMBH
Germany
The flow meter with display convinces with its simple, demand-oriented display, operability and compact design. Thanks to the rotating Oval gear meter and a magnet integrated in the measuring chamber, it enables the exact measurement of the volume flow and measures mineral oils and alternative fuels such as diesel, petrol etc. precisely, quickly and above all efficiently. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Quantity preselection can be retrofitted with a relay module at any time * Suitable for measuring alternative fuels Features & Advantages * Measurement according to the oval wheel principle * High measuring accuracy * Low pressure losses in the system * Measuring range from 3 l/min - 80 l/min * Low frictional resistance
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
CSN® tank heating units are particularly suitable for the direct heating of liquids (Oil, Water, Emulsions), air and gases. They contribute to the avoidance of paraffin clouds in fuel oil or Diesel storage tanks. In relation to the process, we provide you with tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. We offer our series “THF” a suspended, on a chain flexible solution to keep heating oil or diesel fuel in the extraction line pumpable. As a fixed version, we recommend our industrial immersion heaters for heating liquids. Further information about our CSN® Tankheizkörper
Request for a quoteBÜRKLE GMBH
Germany
Immersion cylinder for sampling crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants in Explosion Categories IIA, IIB and IIC. Completely made from non-spark producing materials, nickel-plated. Dipping containers are used in various areas to collect liquids for sampling. Bürkle produces the most comprehensive collection of dipping containers by a long way, the right product for every use as it were. Bürkle offers dipping bottles and immersion cylinders for sediments, for the area of environmental issues, for chemically aggressive products, for petrochemistry, for the ex protection area etc. The dipping bottles for the Ex protection area are made of nickel-plated brass, therefore they do not oxidise.
Request for a quoteTROTEC GMBH
Germany
OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Available in many versions for use in a wide variety of media such as water, acids, oils, fuels, etc. Float and housing in plastic Versions for mounting vertically or horizontally With cable outlet or plug connection
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quoteTROTEC GMBH
Germany
OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Available in brass, aluminum, stainless steel, various float types and with ATEX approval for use in a wide variety of media such as water, acids, oils, fuels, etc. Installation Vertical and 45° / 90° curved With cable outlet or plug connection
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
EEx’e’ certified electrical process flow heaters EEx e T1 – T6 ATEX The “STR-Exe” type electric process flow heaters are EEx e certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The “STR-Exe type electrical process flow heater comprise a large range for industrial application. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Electrical process flow heaters The “STR-TWIN type electrical heater comprise a large range of process flow heaters for industrial application custom built to meet client specification. Due to the small diameter construction of the vessel it is perfectly suitable for low volume or mass flow. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for thin, flammable and inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents. * Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc. * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2
Request for a quoteResults for
Fuel oil - Import exportNumber of results
55 ProductsCountries
Company type
Category