Food industry - Import export

Elastomer or plastic sealing elements and also elements made of composite materials (elastomer + plastic or metal) can be compounded with metal detectable additives.

Sealing and bearing of rods, shafts, axes and spindles. Linear, oscillating and helical motion. Liquids, pastes and gases.

Applications at high speed and low pressure. With O‑ring as secondary seal for sealing in the groove base. Hygienic design without undercuts. No sump formation in front of the seal. Reduced heat buildup due to special lip design. Pressureactivated seal energization. The integrated wedge prevents the sealing lip turning inside out. Very long seal life due to high abrasion resistance. Material only generates low frictional force. Sealing lip does not stick to the mating surface even after prolonged shutdown

The encapsulated O‑ring widens the potential applications of the O‑ring. The core of the ring is made of silicone (VMQ) or fluoroelastomer (FKM). The plastic FEP (tetrafluoroethylenehexafluoropropylene) is used for the seamless encapsulation. The particular product advantage lies in the combination of the elasticity of the O‑ring and the chemical resistance of the fluoroplastic.

Design of the housing in the form of a groove should be avoided if possible. If this is not feasible, good housing and seal cleanability must be guaranteed. The hygienic design requirements can be met by having a particularly large groove base radius, avoiding notches and having a split housing. For WIP/WOP cleaning it is important to be able to remove and replace the seal without damaging it. Given a suitable machine design, cleaning in place is also possible.

Design of the housing in the form of a groove should be avoided if possible. If this is not feasible, good housing and seal cleanability must be guaranteed. The hygienic design requirements can be met by having a particularly large groove base radius, avoiding notches and having a split housing. For WIP/WOP cleaning it is important to be able to remove and replace the seal without damaging it. Given a suitable machine design, cleaning in place is also possible.

Face seal used for rotary and oscillating motion in pipe joints and rotary actuators

For SIP (Sterilization In Place), the MANOY® AS dosing piston is fed into the washing hole, which must be designed so that the piston has sufficient expansion capacity during SIP at +140°C to avoid damaging its functionality and shortening its life. After the cleaning process the MANOY® AS dosing piston may only be moved into the dosing hole when a temperature close to the operating temperature (operating temperature +20 °C), and not to exceed +80°C, has been reached. A feed cone into the dosing hole of 10° max. and rounded edges are essential.

For CIP (Cleaning In Place), the MANOY® AS dosing piston is removed from the dosing hole. A simple vertical wash in the hole is suitable and sufficient. After the cleaning process the MANOY® AS dosing piston may only be moved into the dosing hole when a temperature close to the operating temperature (operating temperature +20 °C), and not to exceed +80°C, has been reached. A feed cone into the dosing hole of 10° max. and rounded edges are essential.

FOOD INDUSTRY

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

LogBox RHT is a small portable electronic temperature and humidity logger with built in temperature and humidity sensors.

The TagTemp is a small portable electronic data logger for measuring and recording ambient temperature changes for applications - on the move.

Wired NTCs have been specifically designed to measure high temperatures with an extremely short response time. Their minimal dimensions can be used in small measuring places and for fast temperature changes.

Glass-encapsulated NTCs have been specifically designed to measure high temperatures with an extremely short response time. Due to the minimal dimensions they can be used in small measuring places and for fast changes in temperature.

Mechanical seals for the food industry are used in a very broad range of industry sectors, such as in breweries, wine and cider productions, beverage industry, cheese dairies, creameries, juice productions, producers of "soft drinks", etc. In this case, the various components of the seal are made of FDA approved materials. Our mechanical seals are suitable for use in: KSB ®, A.P.V. ®, Alfa Laval ®, FRISTAM ® Lowara ®, TUCHENHAGEN ®, HILGE ®, INOXPA PROLAC ®, INDAG ®, GRUNDFOS ®, JABSCO ®, JOHNSON ®, etc.

The Eccentric screw pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, you can choose from a range of different rotary current motors, which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * also available in special immersion depths * Media examples: viscous cosmetic products, food and etc. Features & Advantages * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packages. The pump meets the requirements of hygienic design and is certified according to the "3-A Sanitary Standards". * also available in special immersion depths * equipped as standard with a carrying handle and a Motor * Media examples: liquid foodstuffs and semi-luxury foods, pharmaceutical agents and cosmetic products Features & Benefits * Threadless, manually releasable quick connections in the wetted area * Quick and easy disassembly * Simple and fast cleaning * Gentle, low-pulsation product conveying * Certified and approved according to the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10".

The filter presses from AQUACHEM of the EC Beverage series are used in the beverage industry, for example, for the filtration of selected wines. Another feature is that the filter elements are gasketed, and therefore the must or juice does not also come into contact with the ambient air. The EC Beverage series is offered as standard in the filter plate sizes 470, 630 and 800 mm.

Our biodegradable jars are ready for manufacturing in Germany and in Japan. We have two different mateial grades, 'Premium' and 'Universal'. 'Premium' material which contains visible wood chips adds natural and luxurious look to our customer's product., while 'Universal' material with smaller wood chip inside gives smooth texture and fits well with our customers' brand image. 4 different size jars(7ml, 9ml, 133ml and 200ml ) are currently available for dry and oily foods such as supplement and chocolate. 150ml jar is going to be availabel in 2022 Q1. <Feature> ・100 % plant-based material ・9 standard colour available ・Industrial compostable and free from microplastics (EN13432) ・Food Safety Material (Regulation (EU) 10/2011) ・Natural and luxurious look ・Custom designed product available upon request In additon, we can provide logo printing and liners for better sealing.

Economical owing to highest availability Robust and extremely low maintenance Easy handling Minimum space requirement Stainless steel configuration ASLF 'Anti-Strap-Loss-Function' Constant strap control Strap width 5 - 12 mm, either DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Upstream and downstream interlocks Conveyor speed steplessly adjustable Belt type or roller conveyor Stainless steel welding plate, low maintenance GreenTech energy concept, low power consumption High-Speed-Kit, optional Intuitive operator interface MFT 'Mono-Frame-Technology' Bundle press, optional SAO 'Safe and Open' - Safe without protection doors Bundle flow control Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options available, easily configurable

Frame structure made of chromed tubular material. Height distance between shelves: 355 mm. 4 castors, diameter 125 mm, 2 of them lockable incl. distance holding rolls.

Spare parts supply, retrofits, upgrades, consulting and service for HE-JA and Höller/Weldotron machines, all from one source. We have a large stock of critical spare parts in order to be able to help quickly in an emergency. Talk to us, we will help you!

with pneumatic pressing station for the xed design of palletizable packs for products with 2,200mm, hood opening 800x350mm, hood length 1,600mm, heating power 18KW, speed < 10 pack per mintue

1 heating chamber, main blower installed at the bottom, cooling blower at the tunnel outlet, o and sizes. total length 1.800mm, hood opening 600x250mm, hood length 1.200mm, heating power 15KW, speed to 20 containers per minute