Results for
HAACON HEBETECHNIK GMBH
Germany
Rack & pinion jack for lifting, lowering, adjusting and fixing of mechanical components, devices, machines etc., load 0,5 t up to 10 t Rack & Pinion Jack, wallmounting 1659 Rack & pinion jack with flange, wallmounting, for pulling and pushing load, capacity 1,5 - 5 t
Request for a quoteGEDA GMBH
Germany
GEDA industrial elevators guarantee the smooth, efficient and safe transportation of people and materials precisely where they are required. Even in the toughest of conditions, GEDA products score highly with customers due to their unique quality and modern car design. The versatile deployment sites of GEDA industrial elevators cover cement works, asphalt mixing plants, chemical plants through cooling towers and silos to offshore plants and explosion-protected areas. Industrial elevators create huge time and cost savings due to efficient workflows in maintenance and service work. The GEDA Standard elevator range covers load capacities from 400 to 3,200 kg. The modular design also provides the customer with the choice of different car dimensions and hoisting speeds of up to 60 m/min. Whatever demands an elevator must meet every GEDA industrial elevator, whether a transport platform or personnel and material hoist or pure material hoist, can be perfectly adapted to on-site conditions.
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
The storage and retrieval vehicle is used for storing ULDs in racking. Equipped with a lift, the Elevating Transfer Vehicle transports ULDs vertically and horizontally at the same time. It is guided by rails which also supply the power needed. Flow plane: Horizontal and vertical Flow direction: Unidirectional Functions: Transporting, storing and retrieving ULDs Operating modes: Fully automated, semi-automated, maintenance Benefits: Three-dimensional handling Space-saving Minimal adjustments to make onsite A safe way to transport ULDs with care IATA-compliant transportation of ULDs
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
Specially designed for lifting cars The PEGASOS garage car lift is a perfect solution for construction projects with limited space. It was specifically designed for lifting and lowering of cars and is based on a sophisticated design and a series of convenient features. It has the appearance of a garage and is the ideal alternative to a conventional ramp. The car lift brings vehicle and occupant automatically to the garage or parking deck. The PEGASOS can be mounted directly on the floor and therefore requires no pit. The platform can be equipped with a comfortable cabin or just a simple railing. Due to its compact design and the elimination of the machine room, it is easy to plan. The lifting function is realized by using a very silent and efficient electric motor. The transport of persons in the car is available upon request.
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
Space-saving parking of one or two cars Park the car on the platform and let it magically disappear in a pit The car scissor lift VERTICAR from Lödige is a perfect solution for parking one or two cars in a very confined space. A significant advantage of VERTICAR is minimum space requirement. This is successfully achieved through the integration of the machine into a pit. Thanks to an overhead canopy, a flat and even surface is provided and the lifting table, i.e. the parking position is fully covered. As a result a vehicle is parked in a pit and the overhead surface remains completely intact. Furthermore, as it requires a low installation height, a classic shaft is not necessary. Benefits of the car scissor lift Saves on construction space as a ramp is not required Creates two car parking spaces in even the tightest locations Safe operation with fingertip control Bio-oil used to protect the environment
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
Fast, safe and convenient car parking. Faster parking for added flexibility Parking spaces are in short supply! When space for access ramps becomes an issue, we provide the optimal solution. The hydraulic car elevator TRAFFICO transports both car and passengers quickly and reliably to the desired parking level. A wide selection of options is offered for this classic car lift to meet individual requirements. Convenience important? The most convenient way to initiate operation is by remote control or smart card. The reader can be installed next to the lift entrance on a pedestal, for example, with pull wire switches at each level. Light beams between the cabin and shaft doors avoid any damage to the car during entry and exit. Light barriers facilitate vehicle positioning, thereby speeding up access. In the case of systems with two stopping points, the journey to the other level commences automatically as soon as the vehicle is positioned correctly.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Edge Elements made from stone fibre slabs to enclose elevated greening areas (e.g. elevated planting beds) and separate structure levels of different heights.
Request for a quoteTECHNO-COMPOSITES DOMINE GMBH
Germany
We can create mobile platforms on request. Discuss your mobile platform requirements with us. For mobile platforms we generally use GRP construction profiles manufactured in accordance with EN 13706 / E23. This ensures that the platform has a minimum loadbearing capacity. These GRP construction profiles typically have an isopolyester resin matrix. For structures that are exposed to higher chemical stress, we can also use profiles with a vinyl ester resin matrix. If profiles need to be connected with angle brackets, we generally use V4A stainless steel connectors. We do not use short GRP remnants for such connections because they are not sturdy enough.
Request for a quoteGEDA GMBH
Germany
The furniture is packed and now it is all about carrying it up and down the stairs. But it doesn’t have to be exhausting at all – with the GEDA furniture hoist, moving is easy and relaxing, and most of all: very easy to your back. A furniture or inclined hoist is an enormous help to transport bulky material on construction sites or during a removal. The external lift can transport heavy furniture and boxes to and from the upper stories. Even the fifth story of a building can be accessed easily to perform fast removals. This saves time, and furniture removers or construction workers won’t suffer from joint and back pain.
Request for a quoteGEDA GMBH
Germany
The permanent installed material hoist GEDA 1200 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The GEDA VARIO-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 1500 kg and a lifting height of 9 m/min, the GEDA 1200 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.
Request for a quoteGEDA GMBH
Germany
The personnel and material hoist GEDA Multilift P12 P is an alternative to the classical service- and industrial hoists. It is designed to meet the requirements of the industry. Using the GEDA Multilift P12 P with its single mast, you can transport a maximum of 12 people or 1500 kg. The main features of this hoist are: — enclosed car — completely closed base enclosure — control can be carried out from all loading/ unloading points, from the car and from the base enclosure. A level pre-selection control can be installed as an accessory which enables automatic drive to landing levels.
Request for a quoteGEDA GMBH
Germany
The GEDA 300 ZP P, GEDA 500 ZP P and the 1500 ZP P have turned out to be efficient height access technology tools throughout the years. They have been transporting people and materials on asphalt producing plants, gravel plants, silos, etc. These transport platforms facilitate and accelerate regular inspections, service and maintenance. Often the producers of mixing machines use these hoist as a useful option for the ordinary stairs tower. They can also be additionally installed to already existing silos and plants without great effort and without any problems. This is possible thanks to low anchoring forces as well as to the fact that occurring vertical loads can be lead down to the basement via the mast. These transport platforms are a good-value for money alternative as you do not need a pit, a machine house and supporting constructions.
Request for a quoteGEDA GMBH
Germany
This lightweight and extremely space-saving scaffolding hoist impresses with the best features of the GEDA 200 Z and comes with numerous innovations. It has never been easier to transport heavy material weighing up to 200 kg safely, quickly and in compliance with standards to heights of up to 35 metres. Loading and unloading in particular has been optimised thanks to a new barrier system. Safety gates are no longer necessary and bulky material can be conveniently unloaded from the platform onto the top scaffolding level. The moveable platform ensures maximum convenience with intuitive safety functions. Thanks to the new support rail for the deck stop, the deck currently being worked on can be selected with a simple hand movement and changed effortlessly and without tools. The GEDA 200 Z Comfort is quickly assembled and ready for use thanks to the quick-release fastener for the ladder sections, is extremely easy to maintain and requires hardly any space on the construction site.
Request for a quoteGEDA GMBH
Germany
Using GEDA's suspended working platform means that façades can be worked on cost-effectively regardless of building height. The 1½" tubes used ensure that the new GEDA suspended working platform standard is flexible in its use and very scaffold-friendly. One particularly practical feature is that all screws have the same width across the flats. The platform is big enough for personnel and materials and the centimetre-level precision setting of the operating height always ensures the most ergonomically favourable position during any works. Both for transportation and for assembly/disassembly the new GEDA suspended working platform Standard benefits greatly from the low self-weight of the platform and the outrigger. Its ease of handling – without losable small parts – also translates into huge time and cost savings.
Request for a quoteGEDA GMBH
Germany
These vertical aluminium hoists have already proved their many ways of application for various kinds of use thousands of times. They are easy, quick and reliable transport units for interior work, refurbishment or repairs on flat roof buildings. GEDA can offer the appropriate load receptacle for any kind of building material and any kind of use. Save time and strength by using a GEDA inclined hoist! Transportation elevators are useful for every work – indoor and outdoor. The ladder systems can be used to transport all kinds of materials to the upper levels of a building. For moving furniture, interior constructions, façade renovations or the restructuring of flat roofs, inclined lifts offer the perfect assistance. Due to the movable end, the transportation goods can easily be unloaded from the platform. This prevents back pain and facilitates the work.
Request for a quoteGEDA GMBH
Germany
The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEDA GMBH
Germany
Rope hoists especially for scaffolders Two lifting speeds, an overload protection and a slack rope switch as well as a variety of different load receptacles make these fast scaffold assembly hoists the ideal tool for rationally and safely transporting scaffold components and building materials. You do not need to transport the handy drive of the rope drum to the top. It can simply be installed to the scaffold on the bottom. You can install the lightweight swivel arm in the desired height to the scaffold on the top. Quick assembly and their easily being moved are the biggest advantages of the GEDA scaffold assembly hoists. The maximum working height of 40m can be extended to 76m if you install the winch in a higher position. Apart from scaffolders, it is mainly roofers and painters who use these speedy tools to transport their materials onto the scaffold.
Request for a quoteGEDA GMBH
Germany
GEDA's “electrical scaffold“, the mast climbing platforms GEDA MCP 750 (single mast platform) and MCP 1500 (twin mast platform) are convincing in many ways. Contrary to ordinary platforms, these mast climbing platforms are easy to handle. They can be assembled and dismantled without any problems. For the assembly of the pedestal, grid-supports for standard scaffold components, scaffold coatings, guardrails and toe boards are used. This means economic use in several ways. You can save money through short put-up and dismantling times and you can save your time through multiple-shift usage. Innovative technology in modular system! The well-known GEDA steel mast segments with captive screws allow for easy assembly directly from the platform. Their manifold advantages are low investment costs, high safety and stability, not much effort for assembly, space saving transport as well as proper storage.
Request for a quoteGEDA GMBH
Germany
Two units in one: a building hoist with a load bearing capacity up to 850 kg or a transport platform for a maximum of 5 people and loads up to 500 kg. The transport platform GEDA 500 Z/ZP offers a simple and good-value transport system for materials and people with a spacious transport platform, which is not closed on the top. The well-know GEDA steel mast segments stand for easy assembly directly from the transport platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. In order to prevent people from falling down, hot-dip galvanized landing level safety gates with mechanically locked sliding doors are installed to all loading and unloading points.
Request for a quoteGEDA GMBH
Germany
The permanent installed material hoist GEDA 850 ZM P offers a simple and good-value transport system for materials with a spacious, open top load platform. The well-know GEDA UNI-MAST-system stands for easy assembly directly from the load platform up to a height of 100 m. Without using a crane, you can put on the handy 1.5 m mast segments and secure them with captive screws and locking nuts. The hoist can be installed at buildings and machinery in the private sector and used by a limited, trained group of users. With a load capacity up to 850 kg and a lifting height of 9 m/min, the GEDA 850 ZM P has already proved itself as a helpful machine in warehouses of the tire and automobile industries.
Request for a quoteGEDA GMBH
Germany
The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened. Assembly is not carried out from the roof.
Request for a quoteGEDA GMBH
Germany
The Multilift Comfort range can be used as enclosed hoist for people and loads all around the world without any restrictions. It has been designed to correspond exactly to the international regulations (e.g. EN 12159). You may exchange the standard automatic control with the optional, even more user friendly level pre-selection control. For safety reasons the 2.5m high enclosure is electrically and mechanically blocked. This means the door of the enclosure can only be opened when the hoist is in the base unit. The Multilift Standard range is in no way technically inferior to the Comfort series, but its use depends on the regulations in the respective countries it is used. The hoists are delivered with an electrically surveyed low enclosure. This means that you cannot make the platform leave the base unit or that the platforms stops when a door is opened. Assembly is not carried out from the roof.
Request for a quoteGEDA GMBH
Germany
The transport platform GEDA 1500 Z/ZP unites two different machines in one: a hoist for materials with a load bearing capacity of 2000 kg and a transport platform for material and persons. In contrast to ordinary material hoists, for which the transport of people is strictly prohibited, the GEDA 1500 Z/ZP may transport 7 people in addition to goods as soon as it has been switched to the operating mode “transport platform“. Just as for all other GEDA twin mast transport platforms, you can choose between a lot of different transport platforms and as many different types of roofs. The load platforms provide enough space for bulky and heavy building materials. This can help to improve logistics on site. In order to prevent people from falling down, hot-dip galvanized landing level safety gates with mechanically locked sliding doors are installed to all loading and unloading points.
Request for a quoteGEDA GMBH
Germany
Rope hoists for the transport of materials on every construction site You can install the lightweight swivel arm hoist to any place of the building, like to a scaffold, to window openings, between the storeys or on the roof. These hoist can be used quickly and easily even under difficult circumstances. You can reach a working height of up to 50m. The multitude of the intelligently designed fixing devices and practical load receptacles makes these reliable units universally applicable. As it is possible to separate the electrical winch from the swivel arm, the hoist can be assembled by one person. Save a lot of time and work force on construction sites using the GEDA swivel arm hoists!
Request for a quoteGEDA GMBH
Germany
With the rope suspended working platforms from GEDA, you can work on building façades, but also on silos, towers, cooling towers, industrial plants, pits, etc. without a scaffold. The platform offers enough space for people and materials. You can exactly adjust the working height of the platform to the centimetre, which always grants ergonomic posture. The hot-dip galvanized outriggers on the roof are easily installed and removed because of their plug connections. The components are very lightweight and can be transported by one person. This facilitates moving the platform. Angle track section and brackets make it possible to adapt the platform the the different shapes of the buildings. GEDA rope suspended working platforms are of very high technical standard – the integrated inclination compensating device and the overload safety device allow for safe work!
Request for a quoteGEDA GMBH
Germany
With its rubbish chutes Standard and Comfort, GEDA offers a universally applicable rubbish chute system without any limits. Compared to ordinary rubbish chutes, the wear-resistant GEDA rubbish chute COMFORT has an extremely long working life thanks to its 6mm walls and the additional 3mm anti-wear ribs. High quality made of highly shock-resistant plastic! As a good-value alternative we can offer you the GEDA rubbish chute Standard. It is made of high-quality plastic (4mm wall thickness). Both version are equipped with a double hook. This allows for quickly fixing them in a safe way for being used on walls, scaffolds, inclined roofs or flat roofs. The various fixing devices guarantee short put-up times and therefore allow for efficient work. Furthermore, practical accessories allow for dust-free work (e.g. in downtowns) or working simultaneously on several levels.
Request for a quoteGEDA GMBH
Germany
GEDA's “electrical scaffold“, the mast climbing platforms GEDA MCP 750 (single mast platform) and MCP 1500 (twin mast platform) are convincing in many ways. Contrary to ordinary platforms, these mast climbing platforms are easy to handle. They can be assembled and dismantled without any problems. For the assembly of the pedestal, grid-supports for standard scaffold components, scaffold coatings, guardrails and toe boards are used. This means economic use in several ways. You can save money through short put-up and dismantling times and you can save your time through multiple-shift usage. Innovative technology in modular system! The well-known GEDA steel mast segments with captive screws allow for easy assembly directly from the platform. Their manifold advantages are low investment costs, high safety and stability, not much effort for assembly, space saving transport as well as proper storage.
Request for a quoteGEDA GMBH
Germany
Wherever heavy loads have to be transported to great heights, the new GEDA BL 2000 ensures the necessary efficiency in the construction process. The person and material hoist has a load capacity of 2,000 kg or 23 people and a lifting speed of 55 m/min and the new power pack from GEDA is available as a single and twin variant. The platform size of 1.45 x 3.20 x 2.10 metres also enables the transportation of bulky goods up to a lifting height of 250 metres. To make the hoist even more convenient and user-friendly, it has been equipped with comprehensive state-of-the-art control variants. The GEDA BL 2000 is available in two variants, a Standard and a Premium model.
Request for a quoteResults for
Elevator - Import exportNumber of results
76 ProductsCountries
Company type
Category