Electronic protection - Import export

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. All oil fired indirect IDE devices take place with help of a Danfoss® injection pump. As well, these models have an easy reachable fuel filter on the outside. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

The Raytek CM IR temperature sensor is designed for continuous temperature monitoring in a broad range of manufacturing processes and OEM applications. This sensor provides the advantages of infrared temperature measurement in a powerful, compact, integrated sensor. The CM sensor can easily replace traditional contact probes with a J-type or K-type thermocouple output, or with a user scaleable 0-5 volt output. The CM's onboard electronics are protected by a rugged IP 65 (NEMA-4) stainless steel housing, allowing the sensor to function in ambient temperatures to 70°C (160°F) without cooling. Although small in size, the CM is loaded with advanced features. An RS232 digital interface allows the user to configure all programmable sensor variables with the powerful DataTemp® Multidrop software included with each sensor. The built-in sensor health LED provides a convenient on-line indicator of the sensor's operating status and aids in troubleshooting initial sensor setup.

The Raytek CI noncontact infrared pyrometer is compact and easy to install. Designed for easy integration into a standard 4-wire system, the CI sensor can easily replace traditional contact probes with a J-type or K-type thermocouple output. A 0-5 volt output is available if your is susceptible to noise or requires a longer cable run. The CI unit's onboard electronics are protected by a rugged IP 65 (NEMA-4) stainless steel housing, allowing the sensor to function in ambient temperatures to 70°C (160°F) without cooling. With water cooling, the CI sensor can withstand ambient temperatures to 260°C (500°F).

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

TTK 175 S COMMERCIAL DEHUMIDIFIERPowerful drying technology at the top of the game... The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype. All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites. Wheel it in and watch it work – powerful rotary compressor technology in a robust carriage design Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs.

Equalize airflow pressure within speaker chambers Our POREX® porous flow modulators provide precise airflow control between speaker chambers and to the exterior of the unit, thereby reducing air pulses caused by speaker movement. Allowing a freestanding speaker system to breathe freely during temperature fluctuations, our flow modulators equalize pressure within the unit. Designed for precise airflow control, our flow modulators: Protect sensitive electronic and acoustic components–POREX® porous materials repel dust, water, sweat, oils and other liquids from entering the enclosure. Can be custom developed in three-dimensional shapes for increased design flexibility. request sample ask an engineer

High-performing acoustics vents for superior sound quality Our high-performance POREX® Virtek™ IP-rated PTFE vents are designed to have low acoustic loss while providing pressure equalization and a barrier from dust, water, sweat and other contaminants. Designed for IP67 mobile electronic applications, our acoustics vents: Protect against contaminants–POREX Virtek™ materials repel dust, water, sweat, oils and other liquids from entering the enclosure. Assemble easily–Sintered structure allows material to be handled and welded without cumbersome assembly instructions. Maintain performance–POREX Virtek™ PTFE materials maintain performance through assembly process and resist degradation from handling. request sample ask an engineer

The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber

TTK 125 S COMMERCIAL DEHUMIDIFIER"Nobody can offer as many litres at this weight" The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype. The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions. Good things come in small packages: Power pack TTK 125 S Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Glass surfaces are extremely smooth and meet high hygiene requirements. They are more resistant than plastic and have a high temperature, as well as high chemical resistance. In addition, glass decors ensure a design-oriented and high-quality finish. We offer molded glass parts for a variety of industrial and electronic applications. These include, for example, cover glasses and decor glasses for electronic products and protective glasses for displays. The glasses are usually made of float glass or white glass and thermally hardened ESG glass. The strength is from 0.55 to 19.0mm. For applications in the field of display protection, we also offer ultra-thin chemically hardened front glasses (0.3 – 8.0 mm). Other types of glass include borosilicate glass, quartz glass, magic mirror glass and touch panel glass.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Single-stage rotary vane pumps from Pfeiffer Vacuum have long been some of the most widely used products for processes in the low and medium vacuum range. Their long life and pumping speed, irrespective of the gas used, are the outstanding properties of this pump. Typical applications are found in widely ranging sectors: — Analytics (mass spectrometry, electron microscopy) — Coating technology (surface protection, decorative films, display units, monitor screens) — Vacuum metallurgy (vacuum soldering, vacuum sintering, vacuum alloys, furnace construction) — Leak detection technology (vacuum systems, automotive tanks, airbag cartridges, packaging) — Lighting industry (light bulb manufacture) — Drying industry (vacuum drying, transformer drying)