Electronic protection - Import export

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. All oil fired indirect IDE devices take place with help of a Danfoss® injection pump. As well, these models have an easy reachable fuel filter on the outside. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

TTK 175 S COMMERCIAL DEHUMIDIFIERPowerful drying technology at the top of the game... The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype. All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites. Wheel it in and watch it work – powerful rotary compressor technology in a robust carriage design Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs.

The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber

TTK 125 S COMMERCIAL DEHUMIDIFIER"Nobody can offer as many litres at this weight" The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype. The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions. Good things come in small packages: Power pack TTK 125 S Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

Glass surfaces are extremely smooth and meet high hygiene requirements. They are more resistant than plastic and have a high temperature, as well as high chemical resistance. In addition, glass decors ensure a design-oriented and high-quality finish. We offer molded glass parts for a variety of industrial and electronic applications. These include, for example, cover glasses and decor glasses for electronic products and protective glasses for displays. The glasses are usually made of float glass or white glass and thermally hardened ESG glass. The strength is from 0.55 to 19.0mm. For applications in the field of display protection, we also offer ultra-thin chemically hardened front glasses (0.3 – 8.0 mm). Other types of glass include borosilicate glass, quartz glass, magic mirror glass and touch panel glass.

Compact single-stage gear with solid or hollow shaft combined with a 24V DC permanent magnet motor. Different shaft positions are possible. Stock motors have 28W or 54W output power and a speed of 3000 rpm. The SN15R / SN15HR comes as a 24V-BLDC with integrated operating and control electronics, overload protection and a 4-Q Pi Controller - 40W output power and a speed of 4000 rpm. Gearbox type: SN15 (solid-shaft) / SN15H (hollow-shaft) Motor type: 24V DC permanent magnet Mounting design: B3/B14 Transmission ratios: 3; 7; 10,5; 15; 21; 30; 40; 68 Protection class: IP40 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.

Mobile motorized traction sheve hoist for any lifting height, flexible and economic assembly and installation work. Simple operation for working safely at heights. Gsmartrac is a material rope traction hoist which drives a sheathed rope without rolling it up. This means any height can be reached. Electronic motor protection prevents overloaded lifting operations, giving your hoist long lasting service life with low wear. Please contact us for further information or technical details!

Scope of application Magnetic filter rod (magnetic rod) is mainly used to remove ferromagnetic impurities in powder, granular and liquid or slurry. It is widely used in ceramics, power, mining, plastics, chemical industry, rubber, pharmaceuticals, food, environmental protection, pigments, dyes, electronics, metallurgy and other industries. Working Principle The magnetic rod is made of high quality stainless steel pipe and high B value rare earth alloy NdFeB, and is made by special manufacturing method. The magnetic filter can be assembled on a fixed frame to form a magnetic filter. When the material containing iron passes through, it is attracted by the magnetic rod, and the material containing iron is firmly adsorbed on the wall of the magnetic rod. To ensure the integrity of equipment and product safety. Product features energyfree, pollutionfree, can be installed in any position on the production line with material contact, saving space, easy installation.

The approved and economic system of this multi-tank-machine offers various possibilities for all applications in the area of the production and manufacturing industry. Most different process steps like cleaning, rinsing, inter-rinsing and drying makes the machine the all-round talent. The PERKUTE system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Adjustable feed fork-lift facility incl. 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, filter basket incl. Long wash liquid service life due to the skimmer (washing tank) Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump in the washing- and rinsing tank High permissible basket load 2" socket slide valve for the tank emptying Safety limit switch at cover Separate washing- and rinsing tank

This ergonomic advanced development of the proven SP series distinguishes itself through a user-friendly charging system in the form of a movable loading trolley. For large batches, it can also alternatively be equipped with a loading ramp or lateral movement station.In this manner, loading and unloading processes, even of heavy or voluminous components, can be carried out in an optimized manner. The PERKUTE-System: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Mobile, can be used anywhere 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, Long wash liquid service life due to the skimmer Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump High permissible basket load Safety limit switch at cover 2" socket slide valve for the tank emptying Load...

A compact and sturdy construction characterizes the SP machine which is an closed fully automatic machine. The SP meets the highest requirements where total cleanliness and dryness are concerned. We adjust our production to individual demands and are therefore able to offer tailor-made solutions. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Mobile, can be used anywhere 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, filter baskets incl. Long wash liquid service life due to the skimmer Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump High permissible basket load Safety limit switch at cover 2" socket slide valve for the tank emptying

Conventional thermometers measure the temperature by means of length or volume change of a material, and are only suitable as display instrument. Temperature sensors from Lenord+Bauer use resistance thermometers that feature an almost temperaturelinear resistance curve, and output the resulting measurement data as electrical signal. They are suitable for a measurement range from 40 °C to +250 °C. A thin stainless steel tube protects the electronics from dirt, humidity and corrosion, allowing the sensors to meet the requirements of protection class IP 68. The sensors are in compliance with fire protection standards EN 45545 and are typetested according to EN 50155. • Platinum resistance thermometer Pt100 / Pt1000 • Measuring tube lengths from 30 mm to 140 mm • Connection with 2, 3 or 4wire technology • Fire behaviour according to DIN 5510 and NF F16101 • Custom configuration

Air exchange in sealed housings? No Problem! Our pressure equalisation elements (formerly Gothe & Co. GmbH) have proven themselves reliably worldwide. High temperatures and adverse environmental influences provide continuous pressure fluctuations in sealed housings – protect your sensitive electronics and improve the lifetime of electronic devices with our pressure equalisation elements. Reliable reduction of condensate formation Protection of harmful fluids and particles Special Features Flat construction Easy installation (from inside or outside) 100% Salt retention capacity Very robust Diverse versions Air passage of up to 400 ml/min Technical Data Mounting body/cap brass (optional nickel-plated, chrome-plated or stainless steel) Membrane ePTFE (oleophobic) O-Ring NBR (optional EPDM, FKM or silicone) Water ingress pressure > 0,6 bar Protection class DIN EN 60529 IP66, IP68 (installed) Acceptable temperatures - 40 °C … + 80 °C (150°C temporary)