Electromagnet - Import export

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

EHG electromagnetic holding rods are used in fixture construction, for gripper systems and for a wide variety of tasks in mechanical engineering. EHG holding rods consist of a screwed, two-part system, are double-coated and sealed to IP 65. Max. Operating temperature 60°C Standard voltage 24,48,110V DC Protection class IP 53 ED 100%

The use of pole reversal control devices to control lifting magnets makes it possible to adjust the magnetic field very precisely. Thus, the USGs can be continuously adjusted in holding force and perform a demagnetizing cycle when switched off, which ensures that all parts are released and unwanted residual magnetism in the workpiece is minimized. USG pole reversal control units can be controlled via potential-free contacts with machine controls or pushbuttons in the crane operation and provide feedback on their switching status. As an option, we can also supply manual control units and signal lamp sets to match the pole reversal control units.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.

The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blocks. These magnets are used to handle loads with a large air gap or with scaled surface. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the EPMH from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. Through the impulse current control, the EPMH load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.

The SB950-SF is equipped with the highest safety technology. The electropermanent battery lifting magnet SB950-SF is the top product from ASSFALG in the 950kg load range for flat material. 400kg can be lifted for round material. The SB950-SF has an installed sensor. It measures the magnetic force, compares it with the workpiece weight and shows on the display if the workpiece can be transported. Parameters such as surface property, material thickness and material are considered here. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the electropermanent battery lifting magnet SB950-SF from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets.

ARCUSAFLEX ® + electromagnetic clutch \ AC+EMC ➜ Suitable for torque transmission with an initial differential speed between the drive elements ➜ High torques in the smallest of installation spaces ➜ Designs up to 8 200 Nm, others on request ➜ Quick decoupling without residual torque ➜ Maintenance-free ➜ Suitable for a variety of applications ➜ Emergency operation possible ➜ 24V DC operation, other variants possible ➜ De-energised when open

With linear continuous signal to indicate tank content

Available in many versions for use in a wide variety of media such as water, acids, oils, fuels, etc. Float and housing in plastic Versions for mounting vertically or horizontally With cable outlet or plug connection

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces.

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces.

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces.

Electromagnetic cylinders and actuators for use in applications where compressed air is either not available, too expensive, too slow or for other reasons is not the optimal solution.

Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability. Resolution 0,1µm or 0,5µm Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software included

Incremental length probe with magnetic detection principle. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

Available in brass, aluminum, stainless steel, various float types and with ATEX approval for use in a wide variety of media such as water, acids, oils, fuels, etc. Installation Vertical and 45° / 90° curved With cable outlet or plug connection

Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability.. Resolution 0,1µm or 0,5µm. Extremely insensitive to contamination such as oil mist, moisture and dust. Ball spline bearing of the spindle for long life time. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software for evaluation included.

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.

Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.

Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Extremely robust against oscillations and vibrations due to the Ø 32mm clamping shaft. The probe pin (without spring) is fixed with a magnetic tip on the surface of the measuring object. This allows the change in position of the target to be detected with high accuracy. Perfect for position detection of machine axes.

Read head for magnetic tape scale SL710/720/730 Pl101-R/RH: 1Vpp interface PL101-RA/RHA: TTL line driver interface (RS422) PL101-RM/RHM/RP/RHP/RY/RHY: with serial interface from Mitsubishi (M), Panasonic (P) or Yaskawa (Y) Max. Response speed: 6.4m/s with 1Vpp Max. Resolution: 0.2µm with TTL (phase to phase) Easy installation Protection class: IP67 (RH version), IP50 (R version) Resistant to oil, dirt, vibration and shock

The OPTIFLUX 1000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 1050, OPTIFLUX 1100 and OPTIFLUX 1300 electromagnetic flowmeters for water and other conductive, non-abrasive media and OEM machinery applications.

The OPTIFLUX 2000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 2050, OPTIFLUX 2100 and OPTIFLUX 2300 electromagnetic flowmeters for basic to advanced water and wastewater applications.