Electric switches - Import export

Everything about the power supply. Switches, fuses and main power switches for motorsport.

These are the accessories used for mechanical parts.

The conductivity measuring transducer CONDIX measures the conductivity of liquids. The evaluation of the measuring result is made via the Modbus RTU digital interface directly in a PLC or in the SCADA system. This eliminates the need for additional transmitters with display.

Klöpper Therm designs and manufactures specified switch and control cabinets in various designs – for nearly all types of electric surface heating. By the installation of electronic controllers, heating systems can be controlled in dependence of temperature and/or humidity. Arising disruptions during the control of temperature measuring sensors such as e.g. a falling below temperature, can be signalled or transmitted via indicator lights and/or dry contacts. The operating conditions of each heating circuit in the cold store is indicated by LED indicator lights. Via keylock or push buttons, all heating circuits can be checked quickly and simply. You can easily get an overview about economic efficiency and energy consumption of your heating system incl. documentation with an operating hours counter or energy meter.

In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch. After the technical embroidery process, the safety switch is inserted and connected by our company’s respective department. Each prefabricated element is tested for functionality and performance in the final inspection and is delivered to the customer after passing the test. As a semi-finished product, the infrared heating element on glass mesh fabric can be further processed by the customer, e.g. in connection with silicone, rubber or epoxy resin.

Safe upending of coils (90°) Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type Highstrength chain Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Safe upending (90°) and rotating (180°) of coils Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type highstrength chain Rotating drive via welded surfacehardened sprocket, integrated in base Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

KAMAT foot valves and foot switches are products of the highest technical quality. They are designed for opening and closing the water supply to high pressure blasting equipment. This valve can be used to open and close the water supply to a high pressure blasting unit. The water is supplied by a high pressure hose connected to the foot valve. When the pedal of the valve is depressed, the valve opens. When the pedal is released, the valve closes and the water is discharged through the bypass without pressure. The foot valve and high pressure pump can also be connected via an electrical switch. If the pump has a suitable control, the pressure generation is switched on or off mechanically when the valve is actuated. The KAMAT foot valve has been designed and constructed in accordance with the rules of technology and applicable standards and guidelines.

Multi-consumer valves distribute the output of the high-pressure pump evenly or as required to several high-pressure blasting tools. KAMAT offers two valves for this purpose: the mobile dual consumer control and the MVS4 multi-consumer control. When the consumer is opened, both controls open the valve and when the consumer is closed, the valve is closed. When all valves are closed, the controls switch off the pressure generation. The dual-user control is used to control one or two high-pressure consumers, such as high-pressure guns. The dual-user control is available with pneumatically or electrically controlled valves. The consumer and the high-pressure plunger pump have a corresponding control option. The dual consumer control and the consumer are connected by an electrical switch.

Heavy industrial contactors are essential components in industrial systems that enable reliable switching and control of electrical loads. At AIS Hensch Automation-Industry-Solution we offer a wide range of high quality heavy industrial contactors designed for demanding applications in various industries. Robust construction for use in demanding environments: Our heavy industrial contactors are specifically designed for use in the harshest environments. They feature a robust construction that ensures reliable performance even under extreme conditions. High switching performance and reliability: Our contactors offer high switching performance and reliability to meet the needs of industrial applications. They are capable of switching large electrical loads and provide stable performance over a long period of time. Versatile Applications: Our heavy duty industrial contactors are versatile and suitable for a variety of applications including motor control

Because of their specifications governed by corresponding standards, these cable pull switches are used exclusively as safety command devices. These switches are available in metal enclosures as well as in insulation-enclosed versions. They are operated manually by pulling on the attached cable. The basic design of the standard rope pull switches is based on that of position switches. — Versions available in plastic and metal — With and without latching function — Max. span length: 2 x 75 meters — Protection class IP 65 according to IEC/EN 60529 — Ambient temperature -30°C to +80°

FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.

STAUFF provides a complete range of Spin-On filters which can be used either as suction filters or as return line filters for low pressure applications. The various ranges meet international standards. The corresponding STAUFF Filter Elements are available from stock. Clogging Indicators (available as an option) ▪ Visual clogging indicator with coloured segments ▪ Electrical clogging switch ▪ Other types available on request Constructions ▪ In-line Spin-On filter head ▪ In-line Double Spin-On filter head ▪ Tank Top Spin-On filter head Operating Pressure ▪ Max. 14 bar / 200 PSI Nominal Flow Rate ▪ Max. 460 l/min / 120 US GPM Connections ▪ Option of BSP, NPT, SAE flange or SAE thread, others on request Material ▪ Filter head: Aluminium Media Compatibility ▪ Mineral oils, other fluids on request

STAUFF RFS Carbon Steel Return Line Filters are designed as tank top or in-line filters. They are mounted directly on the tank top and if 100% of the system oil is filtered, they provide the optimum removal of contaminants from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed with a connection, threaded or flanged, for extending the return oil beneath the surface thus preventing the entrainment of air. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 365 PSI Nominal...

STAUFF RFB Return Line Filters are designed as tank top filters. They are mounted directly on the tank top and if 100% of the system oil is filtered they provide the optimum removal of contaminant from the system. This provides the pump with clean oil thus reducing contaminant generated wear. Because of it’s low weight and compact design, the STAUFF RFB Filters are ideally suited for mobile hydraulic applications. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Air Filter Element (available as an option) ▪ Filter paper micron rating 10 µm, other filter materials and micron ratings on request Filter Bowl with Threaded Connection (available as an option) Filter...

STAUFF RFA Return Line Filters are a one piece design and can be used as a tank top or an in-line filter. They are mounted in the return line and if 100% of the system oil is filtered, provide the optimum removal of contaminant for the systems. This provides the pump with clean oil, thus reducing contaminant generated wear. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection (available as an option) Filter Bowl with Threaded Connection (available as an option) Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 265 PSI Nominal Flow Rate ▪ Max. 110 l/min / 30 US...

STAUFF Return Line Filters RF are designed as tank top filters. They are mounted directly on the tank top and when 100% of the system's oil is filtered they provide the optimum removal of contamination from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed to return the oil beneath the surface thus preventing the entrainment of air by the returning oil. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection ( available as an option ) Filter Bowl with Threaded Connection ( available as an option ) Filter Elements ▪ Filter elements of RE series Construction ▪ Return...

- Large and ergonomic height adjustment range - No displacement of table-top during height adjustment - Moulded base provides generous legspace 4 different models: Height adjustment 500 to 920 mm, either by means of hydraulic foot lever or electric foot switch with safety ON/OFF switch, 650 mm or 800 mm width. Servo-assisted head section adjustment from -20° to +40°. 2-section upholstery 70mm thick, leatherette cover acc. to colour chart. Powder coated chassis in white aluminium RAL 9006, grey aluminium RAL 9007 or grey white RAL 9002. Silver-grey plastic chassis cover. With 4 levelling feet, not electrically conductive. Safe working load: 225 kg Options: Head section with nose outlet, mobile version,fold-down side guards

Small parts in large quantities? Electrical engineering in particular requires very quick machines. Electrical engineering is also becoming increasingly important in IT, with particularly small components required here. The machines from SIM Automation GmbH can detect even the smallest deviations of mere millimeters during sorting. We have produced assembly and testing lines for the following components in electrical engineering (extract): - Instrument components - Step motors and servo motors - Quick-release clutch systems - Gearbox balance shafts (for checking run-out accuracy and backlash) Assembly lines: - Plug contacts (vehicle electrical systems) - Industrial sockets and switches - Sockets / light switches - Electric heater control valves - Electric razors - Electric toothbrushes Testing and inspection: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)

- Quality control and safeguarding - Individual test values and criteria - Customer-specific measuring and testing plants - Single measuring systems with manual assembly - Fully integrated and automated testing plants using robots - Optical, acoustic or electrical systems with/ without parts contact, data preparation, analysis Measuring and testing systems we were involved in: - Camera systems with corresponding image processing - Part recognition, positioning, color and surface examination, checking for damages - Optical / tactile / ultrasonic tests using sensors and displacement measurement systems - Leakage and pressure tests - Inspection and monitoring of filling level - Run-out properties and accuracy - Backlash measurement - Electrical tests and measurements - Electrical values, check measurements, switching and opening properties Used in all branches: e.g. pharmaceuticals industry, medical engineering, cosmetics, electronics and automotive industries.

Unbeatable small installation depth and the highest stability in its class. The joysticks of the series 844 exhibit properties, which are normally found in heavy-duty products only, even though it is a very compact finger joystick. For example, with handle "T" the 844 becomes the most compact stock grip joystick with push button (see picture above in the center). In this configuration, the 844 has the advantage over larger models of lower price and space requirements. The joysticks of the series 844 are equipped with wear-less Hall Effect sensors, are available with up to 3 axes, and exhibit a robust mechanical construction, with a ball-socket pivot. It withstands high push, pull, translational and rotational forces, up to a load of 400 N (vertically). The operational lifetime is up to 10 million operations. With protection up to IP65, a variety of handle shapes, limiters and output options, the optimum product can be selected for the application.

The joysticks of the TRY100 series cover a great variety of different applications due to their high number of configuration options, and convince technically in every respect The TRY100 is the all-rounder in the field of finger joysticks because of the extensive selection of handles, limiters and output options. Optionally, redundant sensors are available. Thus, the joysticks can be optimized for almost all possible applications. With the convenient plug-in contact and the small installation depth of < 26 mm, the joystick offers unequalled opportunities in case of space-limitations below the panel. Due to its modern contact-less hall-sensors, the electro mechanics guarantee for a long mechanical life expectancy of 5 million operations. The construction is laid-out for a load resistance up to 200 N, and improved handle options offer protection up to IP67 above the panel.

The medium-sized hand joysticks of the 870 series with stock grip handle were specially developed for the multi-axis control of machines in demanding applications with highest requirements on quality and feel. The joysticks are a guarantee for success in demanding applications with up to three axes, where quality, durability and reliability are paramount. The precision manufacturing of the joystick results in a particularly high-quality feel that conveys a safe operating feeling and enables the user to precisely control movements in several dimensions. Thanks to the non-contact Hall effect technology and the optional double outputs, the joysticks are extremely reliable and safe to use even in the toughest conditions. The joystick is electrically connected via a 12-pin connector, which enables easy installation. The installation depth of <49 mm is particularly advantageous when space is limited.

Finger Joystick Series TRY22 Industrial joystick for three axes of the highest quality in terms of mechanics, materials and workmanship Exceptional quality of mechanics and sensors For demanding applications Contact-less, wear-free Hall Effect technology Redundant outputs available Protection available up to IP65 (above panel) The TRY22 series was developed strictly following criteria such as cost efficiency, high quality level, high IP classes und easy installation.

Inherently RFI/EMC immune and most flexible in its class The joysticks of the series 842 exhibit properties, which are normally found in bigger joystick models only, even though it is a very compact finger joystick. Particularly worth mentioning is the possibility to configure the three axes independently and the option for a friction clutch in x and/or y-axis. The series is equipped with potentiometers, because potentiometers are still the best choice if EMI/RFI resistance requirements are very high. The joysticks are available with up to 3 axes, and exhibit a robust mechanical metal mechanism. This way the return properties of the x and y-axis can be changed by e.g. using a stronger or weaker spring, or by using a friction clutch.

Reliable switching with spring return mechanism thanks to the 851 joystick with good price/performance ratio The series 851 switch sticks feature a functional but space-saving design. The optimized mechanics, including a stainless steel metal shaft, combined with micro switches allow for reliable switching for currents up to 10 A and voltages up to 240 V, while only taking less than 24 mm space below the panel. The spring return mechanism guarantees for safe control of the application. A cross- and one-dimensional limiter are both supplied with the shipment. The protection is IP65 above the panel. On request, switches with gold-plated contacts are available for corrosive surroundings.

The adaptability of the sensors in the premium joystick series 826 is unequalled in the field of joysticks The joystick series 826 fulfils the highest demands on quality. It shows its strengths at challenging applications with up to 2 axes, where no compromises are made when it comes to endurance and reliability, and the application asks for special sensor configurations. Die configuration options of the series 826 are unique: both axes exhibit a separated shaft for the sensors, so that the sensors, micro switches and return mechanism (spring return/friction clutch) can be adjusted individually. Especially for safety critical applications, this series is often the only series that offers the necessary options to fulfil the requirements.

Unique: The TRY20 offers 3 axes and is still a compact thumb joystick The joysticks of the TRY20 series are unique in their class thanks to their rotatable knob, which, as a z-axis, offers an additional third, proportional degree of freedom for controlling the application. The industrial joysticks achieve the highest level of quality in terms of mechanics, materials and workmanship. The high-quality haptics convey a secure operating feeling and enable the user to precisely control movements in several dimensions. Double (redundant) outputs are optionally available, which enable use in safety-critical applications. Variants with protection class IP40 (hardcover) and sealed variants (rubber bellows) with protection class IP54 are available. If the z-axis (the rotatable knob) is not required, the 2-axis version with protection class IP65 can be implemented as a special version.

Space-saving, compact – but rugged nonetheless The TRY50 series covers the transition from finger- to hand-size joysticks. This is realized by a construction of the very robust mechanism combined with space-saving Hall sensors. The TRY50 was specifically developed for applications, where a rugged hand joystick is needed, but space is limited. The optimized dimensioning of the mechanism and control lever make it possible to use the joystick in environments, where only finger joysticks would fit, but lack the needed load resistance. The joystick is equipped with Hall sensors and thus shows only minimal drift of the output signal over many years of operation. Optionally, redundant sensors can be chosen to further increase reliability.