Edges - Import export

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane via aluminium connection elements. For roof pitches of up to 5°.

Perforated gravel retainer L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Optigrun Edge Elements made from aluminium as enclosure for extensive and intensive green roofs, for enclosing raised intensive greened surfaces and as borders between different surface types.

In addition to loads with rightangled edges, there are also transportable goods with different geometry. These include loads with projecting spines and with sharp or jagged external contours such as gearwheels, turbine blades, etc. These edges are not addressable using normal approaches. The secuwave protective sleeve was developed for components with extremely critical edges. secuwave increases the deflection radius. The „sharp edge“ has no contact with the protective sleeve and thus cannot cut it.

If the edge radius is smaller than the thickness of the lifting strap, the edge is considered „sharp“. Lateral motion or pressure alone may be enough to cut through the textile fibres of the lifting strap. The 56 mm secutex coating sits between the load and the textile load lifting accessory. The edge radius is increased by this layer. The edge is no longer sharp against the lifting strap and lift forces are directed away from the edge.

The light and handy machine for the edge area and the treatment of wooden stairs! It is small, particularly manoeuvrable and therefore also suitable for areas that are difficult to access. With the long attachment, the ELAN can also be used to sand surfaces under radiators. This edge sanding machine is easy to handle due to its light and compact construction. Its manoeuvrability facilitates working in areas that are difficult to access, such as when sanding wooden stairs. The sanding discs can be used both for velcro and for tightening. The ELAN has proven its value with professionals, but is also gladly rented by DIY enthusiasts. Applications with the ELAN: This edge and stair sanding machine is mainly used for sanding wooden floors. Due to its compact construction it is especially popular for the sanding of wooden stairs.

The perfect solution for the treatment of edges and corners - and this almost dust-free! Powerful, efficient and very user-friendly! The FLIP® is also extremely versatile. The different attachments - short, long, corner or milling attachment - can be changed on the job site easily and quickly. The FLIP® stands for ergonomics, simple adjustment and operation - ideal for efficient sanding of edges and corners. It was the first edge sanding machine in the world to be awarded the "Wood Dust Tested" certification. It works almost dust-free thanks to an exceptionally powerful extraction and a special emptying device for the dust bag. Motor housing, handle and attachments are made of abrasion-resistant, glass-fibre reinforced plastic. This converts the FLIP® into a very robust machine. The various attachments can be changed quickly and easily, in order to adapt the machine always directly to the individual job site conditions. It is available with the short, long or corner attachment.

The robust edge sanding machine - best suited for the edge area of large surfaces! Equipped with a height-adjustable bracket, the UNICO can be used both kneeling and standing. The low-maintenance and quiet running motor makes it a very reliable machine. The UNICO is the technically and ergonomically improved successor to the classic RANDMEISTER. Even areas with poor lighting conditions can be worked on more easily thanks to the very robust, integrated LED work light. The height-adjustable guide tube and the slewable bracket allow an individually adjustable working position and the sanding even when standing. The handle positioned on the attachment makes it easier to guide the machine. Applications with the UNICO: The UNICO is suitable for sanding wood and screed surfaces. The machine shows its strength, for example, when removing old, persistent layers of paint and lacquer.

Our seal edge bags are suitable: when needing high barrier and leak-proof properties when needing high strength of the seams for the packaging of solids, powders, pastes and fluids especially as coffee bag (side fold bag with or without quad-seam), as tobacco bag as well as for pet food. Our seal edge bags are available according to your specification regarding sizes and composition of the laminate – also in combination with PET / ALU / PA as flat bag as side fold bag with normal bottom and backside seam optionally bottom with k-seam as side fold bag with 4-side quad seam. This bag type has good standing properties and can take up high volumes as Doypack as flat bag or Doypack with or without zipper as flat bag also with glue strip with/without Eurohole or carrying punch-out optionally with ventilation valve as very stable header bag unprinted or printed up to 10 colours in flexo or gravure printing

iglidur® knife edge rollers Precise and lubricant-free deflection igus® has developed its own knife-edge conveyor pulleys to implement conveyor belt deflection for conveyor technology applications. The first standard product range has three iglidur® materials available: the universal iglidur® P210 and the FDA compliant iglidur® A180 (up to 90°C) and iglidur® A350 (up to 180°C). The iglidur® solution is characterized by tight deflection radii and low essential driving power. Complete freedom from the lubricant of the belt deflection Low driving power Tight deflection radii Long service life of the belt Cost-effective High holding times Application areas: Packaging, material handling, automation, food processing. Brochure (PDF) Shaft diameter d1 [mm]: Knife-edge conveyor pulley application example Precise and lubricant-free deflection igus® has developed its own knife-edge conveyor pulleys to implement conveyor belt deflection for conveyor technology applications. The first standard product range has three iglidur® materials available: the universal iglidur® P210 and the FDA compliant iglidur® A180 (up to 90°C) and iglidur® A350 (up to 180°C). The iglidur® solution is characterized by tight deflection radii and low essential driving power. Complete freedom from the lubricant of the belt deflection Low driving power Tight deflection radii Long service life of the belt Cost-effective High holding times Application areas: Packaging, material handling, automation, food processing. Brochure (PDF) Shaft diameter d1 [mm]: Soft stainless steel Hard stainless steel

Fitted with adhesive tape, reading angle and dust cover, Colour: transparent or white

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

Optigrun Edge Elements made from stone fibre slabs to enclose elevated greening areas (e.g. elevated planting beds) and separate structure levels of different heights.

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

Item No.: D43900290 Woven edging Specification Woven edging Non-elastic webbing with edging on one side Model type: C (Customised) Dimensions: approx. 290.0 mm wide Material: Polyester Colour: black Property: non-elastic Packaging: rolled, with core

Item No.: 985048 Edge binding Specification Edge binding Elastic edge binding Model type: C (Customised) Dimension: approx. 14.0 mm wide Material: Polyester/Cotton/Spun rayon Colour: black/neon green Property: elastic Elastic Material: Elastane Packaging: on spool Note Features: 2-coloured

Item No.: 785210 Edge binding Specification Edge binding Woven bias tape, skin protection on one side, flame-retardant Model type: C (Customised) Dimension: approx. 25.0 mm wide Material: Polyester/Polyamide Colour: black Property: elastic Elastic Material: Natural rubber Packaging: on spool Note Features: Skin protection on one side, flame-retardant finish

Item No.: D55610020 Edge binding Specification Edge binding Elastic edge binding Model type: S (Standard) Dimension: approx. 20.0 mm wide Material: Polyamide Colour: skin tone Property: elastic Elastic Material: Elastane Packaging: on spool

With ridge for dividers, for 5-10 mm glass and wooden shelves, with hinge function, Colour: transparent

For use with Tegometal shelving.

A clean solution that allows you to label your tires in an efficient and safe manner: The adhesive-free edge of the Bizerba tire labels minimizes the cleaning effort of your application devices. It ensures optimal adhesion even on the most difficult surfaces. Matching your needs the specifically developed quality label is printable by means of thermal transfer ribbon or ink-jet. Bizerba tire labels are the right solution - meeting the special requirements of your product in terms of labeling: We have developed a soft special adhesive with strong adhesion which safely sticks to very grooved rubber surfaces. In all weathers.

The compact video endoscope systems from Micro-Epsilon Eltrotec present the optimum solution for your mobile application. The modular system has a wide range of probes with different diameters and working lengths as well as camera and light technologies. This results in a huge spectrum of configuration possibilities.

Inspection chamber for use on greened or gravelled roof areas above drains in edge areas directly before any ascending structural components.Special inspection chamber for use over roof drainage outlets at the edge before ascending components, especially for outlets at the side through the fascia Chamber walls and cover with inlet slots, possible to connect 2 lengths triangle water conduit plus on three sides Chamber cover with inlet slots, compressive strength approx. 150 kg Insensitive to humid acid Reverse releasable 80 mm high

Optigrun Edge Inspection Chamber RKS 80 for use on greened or gravelled roof areas above drains on edge areas directly before any ascending structural components.Especially suitable for use around edges in front of rising components Above rainage outlets for green or gravelled rooftops Can be connected to 3 strands of WLP Plus Triangle Water Conduit Inspection lid with entry seals Insulation wedge profile released from the back Walkable

rotating spindle coating machine for larger quantities or longer process times

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

The protection against „sharp edges“ Alongside other factors such as temperature, chemical environment and mechanical loads, the „sharp edge“ remains one of the main causes of damage to the lifting accessory itself and frequent cause of accidents. Most damage on sharp or rough edges is the result of load movement perpendicular to the load lifting accessory. If the edge is „sharp“ it can, in a worstcase scenario, cut through the lifting accessory. If the load moves laterally, a cutting movement takes place at the edge. Much like the blade of a knife, the edge can cut through the fibres of the textile lifting accessory. For loads with a „sharp edge“ or with a rough surface, a protective sleeve or fixed coating is recommended to protect the textile lifting strap.