Edges - Import export

In addition to loads with rightangled edges, there are also transportable goods with different geometry. These include loads with projecting spines and with sharp or jagged external contours such as gearwheels, turbine blades, etc. These edges are not addressable using normal approaches. The secuwave protective sleeve was developed for components with extremely critical edges. secuwave increases the deflection radius. The „sharp edge“ has no contact with the protective sleeve and thus cannot cut it.

If the edge radius is smaller than the thickness of the lifting strap, the edge is considered „sharp“. Lateral motion or pressure alone may be enough to cut through the textile fibres of the lifting strap. The 56 mm secutex coating sits between the load and the textile load lifting accessory. The edge radius is increased by this layer. The edge is no longer sharp against the lifting strap and lift forces are directed away from the edge.

iglidur® knife edge rollers Precise and lubricant-free deflection igus® has developed its own knife-edge conveyor pulleys to implement conveyor belt deflection for conveyor technology applications. The first standard product range has three iglidur® materials available: the universal iglidur® P210 and the FDA compliant iglidur® A180 (up to 90°C) and iglidur® A350 (up to 180°C). The iglidur® solution is characterized by tight deflection radii and low essential driving power. Complete freedom from the lubricant of the belt deflection Low driving power Tight deflection radii Long service life of the belt Cost-effective High holding times Application areas: Packaging, material handling, automation, food processing. Brochure (PDF) Shaft diameter d1 [mm]: Knife-edge conveyor pulley application example Precise and lubricant-free deflection igus® has developed its own knife-edge conveyor pulleys to implement conveyor belt deflection for conveyor technology applications. The first standard product range has three iglidur® materials available: the universal iglidur® P210 and the FDA compliant iglidur® A180 (up to 90°C) and iglidur® A350 (up to 180°C). The iglidur® solution is characterized by tight deflection radii and low essential driving power. Complete freedom from the lubricant of the belt deflection Low driving power Tight deflection radii Long service life of the belt Cost-effective High holding times Application areas: Packaging, material handling, automation, food processing. Brochure (PDF) Shaft diameter d1 [mm]: Soft stainless steel Hard stainless steel

Fitted with adhesive tape, reading angle and dust cover, Colour: transparent or white

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

Item No.: D43900290 Woven edging Specification Woven edging Non-elastic webbing with edging on one side Model type: C (Customised) Dimensions: approx. 290.0 mm wide Material: Polyester Colour: black Property: non-elastic Packaging: rolled, with core

Item No.: D55640017 Edge binding Specification Edge binding Elastic edge binding Model type: S (Standard) Dimension: approx. 17.0 mm wide Material: Rayon filament/Spun rayon/Polyamide Colour: black Property: elastic Elastic Material: Elastane Packaging: on spool

Item No.: D55610020 Edge binding Specification Edge binding Elastic edge binding Model type: S (Standard) Dimension: approx. 20.0 mm wide Material: Polyamide Colour: skin tone Property: elastic Elastic Material: Elastane Packaging: on spool

Item No.: 785210 Edge binding Specification Edge binding Woven bias tape, skin protection on one side, flame-retardant Model type: C (Customised) Dimension: approx. 25.0 mm wide Material: Polyester/Polyamide Colour: black Property: elastic Elastic Material: Natural rubber Packaging: on spool Note Features: Skin protection on one side, flame-retardant finish

Item No.: 985048 Edge binding Specification Edge binding Elastic edge binding Model type: C (Customised) Dimension: approx. 14.0 mm wide Material: Polyester/Cotton/Spun rayon Colour: black/neon green Property: elastic Elastic Material: Elastane Packaging: on spool Note Features: 2-coloured

For use with Tegometal shelving.

The protection against „sharp edges“ Alongside other factors such as temperature, chemical environment and mechanical loads, the „sharp edge“ remains one of the main causes of damage to the lifting accessory itself and frequent cause of accidents. Most damage on sharp or rough edges is the result of load movement perpendicular to the load lifting accessory. If the edge is „sharp“ it can, in a worstcase scenario, cut through the lifting accessory. If the load moves laterally, a cutting movement takes place at the edge. Much like the blade of a knife, the edge can cut through the fibres of the textile lifting accessory. For loads with a „sharp edge“ or with a rough surface, a protective sleeve or fixed coating is recommended to protect the textile lifting strap.

secutex coated lifting straps gently adapt to the „sharp edges“ of the load. The extreme structural resistance of the secutex material safely prevents any cutting of the load lifting accessory. For very „sharp edges“ the coated lifting strap is preferable since it reliably prevents movement over the edge. We offer two different types of fixed coating. The secutex fixed coating protects the single sided secutex coating against cuts to the loadbearing textile.The reverse side is protected against abrasion and dirt by the Powerflex thin coating. The lifting straps with secutex fixed coatings are very flexible and easytouse. The twosided fixed coating provides allround protection to the lifting strap, offering double security. This means that both sides can be used as contact sides. Dangerous mixups are now a thing of the past.

Fixed protective sleeve with movable fixed coating The new patentprotected secumove coating combines the advantages of a protective sleeve and a sleeve with a fixed coating. The protective secutex coating is firmly attached to a loop of the lifting strap. The other end of the lifting strap slides freely through the sleeve and is used to equalise the lengths. secumove thereby ensures that there is no movement over “sharp edges”. No movement, no wear when nothing moves, nothing becomes worn. The service life of the newlydeveloped secumove coating is therefore significantly increased, even when used with rough loads. secumove is optionally also available with proven metal plate reinforcement for “critically sharp edges“. For these heavy duty loads, we recommend specialist onsite advice. Important uses include, for example, the careful lifting of loadbearing trusses or sheet packages and coils. secumove is not suitable for turning.

The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.

Fix the shelf edge rail DBR to the metal shelves in your electronic, DIY or food store. The magnetic scanner rails are also ideal for equipping your shelves in storage and production. The price rail is quickly attached to metal shelves via magnetic tape on the back and can also be removed again without leaving any residue. Choose from three different versions of the magnetic back. The magnetic DBR rail is available with transparent or white back. Choose the insertion height that suits your price labels and equip shelves in various sectors with the practical scanner rail.

Fix the DBRU shelf edge rail to the metal shelves of your electrical retailer, DIY store or food retailer. The magnetic scanner rails are also ideal for equipping your shelves in the warehouse and production. The price rail is quickly attached to metal shelves using magnetic tape on the back and can also be removed again without leaving any residue. Choose from three different versions of the magnetic back. The magnetic DBRU rail is available with a transparent or white back. Choose the insertion height that suits your price labels and equip shelves in different sectors with the practical scanner rail.

To clip on to scanner profiles, hinged.

For Wanzl and Wire-Tech wire shelves, with 2 horizontal wires, hinged.

The practical self-adhesive price rail "DBR" sticks to the intended shelf due to the fleece adhesive on the back and can be used variably. Attach the rail at the desired height and benefit from the proven adhesive power of the adhesive. You will receive the scanner rail with a transparent or also with a white back. The front insertion side is transparent. Use the rail for stock identification and scan the inserted barcodes without any problems. For use in your store, you can also label the insert with the current product price and offer your customers a quick overview.

With ridge for dividers, for 5-10 mm glass and wooden shelves, with hinge function, Colour: transparent

For 39 mm high tickets, for 16-18mm wooden shelves, hinged, Colour: transparent

Features adhesive tape, reading angle, dust cover and C-snap

For Wanzl and Wire-Tech wire shelves with 2 horizontal wires.

For Linde, Storebest, Tego and Adams shelving.

made from environmentally friendly PET material, with adhesive tape.

With adhesive tape, for shelving without front channel. Reading angle of 15°.

For 5-10 mm thick glass and wooden shelves.

For use with Tegometal shelving.