Dust protection - Import export

calibratable, electromechanical double-chamber weighing scale for 1-4 different admixtures with automatic water flushing mounted in splash-water and dust protected casing

calibratable, electromechanical single-chamber weighing scale for up to four different admixtures with automatic water flushing mounted in splash-water and dust protected casing

fully automatic volumetric admixture dispenser for up to two admixtures with level control device for four automatically selectable filling heights autmoatic water flushing mounted in splash-water and dust protected casing

P-131-C26 - hydraulic crimping head, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) opening jaw: 26 mm Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

P-60-CK - hydraulic crimping head, 60 kN, CU300mm² for exchangeable dies series "60-CK", "22" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

This force measurement chain was developed for applications where a low cost solution is more important than achieving high levels of accuracy. The sensors strain gauge technology allows the measurement of static and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring chain suitable for a wide range of applications, such as Industrial manufacture Manufacture of customized machinery Geological investigations Motor vehicle engineering Commercial agriculture Bridge building The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. The domed form, however, minimizes the effect of a force that is not exactly axial.

U-pockets enable safe and simple handling of fast-changing advertising posters and special offers. The posters are protected from dust and are therefore often reusable. We use UV-stabilized sheet materials.Frame not included in delivery.

COMMERCIAL DEHUMIDIFIER TTK 350 SProfessional all-rounder for demanding drying operations Black and white combined in a powerful device. The TTK 350 S makes you stop thinking in terms of black and white or good and cheap. It is simply both combined in one device, allowing you to benefit from prices at a Far East level without compromising in terms of workmanship and reliability. For the quality of this dehumidifier is no accident – but traditional EU manufacturing. Not only the plastic-coated metal housing but also the stable carriage construction with bar handle and large transport wheels for maximum mobility demonstrate the dehumidifier's robust and durable design. The operating switch and the filling level warning light are protected from dust and spray water by a protective cap, and a slotted hygrostat rotary switch protects against inadvertent misadjustment of the switch position.

TTK 175 S COMMERCIAL DEHUMIDIFIERPowerful drying technology at the top of the game... The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype. All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites. Wheel it in and watch it work – powerful rotary compressor technology in a robust carriage design Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs.

QuickFit Protection Basket Our protection baskets are valuable accessories: they protect against collisions, give additional protection against dust and are an optical enhancement. Like the heaters themselves, they are manufactured in high-grade steel, so that we offer a logical solution regarding both quality of material and optical general impression. QuickFit: You fix our baskets without any further tools or drillholes! Just put the basket over the already mounted RiRo and wedge it, ready!

Dustproof. Waterproof. Tough. Reliable. Strong cases and boxes for indoor and outdoor use – extremely durable and sturdy. Ideal for protecting high-quality items Robust due to the extra thick wall Waterproof sealing ring in the case lid provides reliable protection against dust and water Certified according to IP67

FFS film is an interesting alternative to ready-made plastic bags. Form fill seal film is perfect for packaging granulate, powder, grain, feed, wood pellets and more in one quick and easy step. FFS film manufactured by Dürrbeck meets the highest standards, guaranteeing the perfect protection against dust, moisture and other harmful elements. FFS film bags are easy to fill thanks to the power of gravity, and fulfil a variety of demands thanks to the many available options – including, for example, perforation or ventilation to allow moisture or air to escape from the bag, or a higher coefficient of friction (COF) that improves the stability of the load during transport.

TTR 250 Ex stainless steel desiccant dehumidifiers For use in Ex-proof zones ... The TTR 250 Ex complies with the ATEX Products Directive 2014/34/EU and was specially developed for dehumidification in hazardous areas (non-conductive dusts). Ex protection: ATEX zone 22 (Ex II 3D Ex c T240 °C) With the TTR 250 Ex you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany. The standard operating hours counter of the TTR 250 Ex is optionally also available as a dual counter for the additional MID-compliant registration of the power consumption. A few practical benefits: * - Robust high-quality dehumidifier “made in Germany” * - Corrosion-resistant stainless steel housing * - Integrated heat recovery * - Self-regulating PTC heating * - Ampere meter to control the operating condition * - Operating hours counter

For cleaning and care of all plastic surfaces in the car interior. Reliably prevents electrostatic charges, has a dust-repellent effect and protects against re-soiling. Leaves a pleasant, fresh scent. Other sizes available on request

Extra strong, magnetic document sleeve for metal surfaces. With protective flap to prevent documents from getting dusty or damp. • Magnetic document sleeve with strong adhesive force through two heat-sealed neodymium strong magnets • Use on metallic surfaces, such as meshed containers, pipes and moveable transport containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Protective flap protects inserts against dust and moisture • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502

The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 39.5 mm — cable and sensor section separable — especially for sewage, viscous and pasty media Optional Features: — IS-protection Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm pure ceramic (99.9 % AI2O3) — different kinds of cable — different kinds of elastomeres

The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O — accuracy: 0.1 % — diameter 39.5 mm — cable and sensor section separable — HART®-communication (setting of offset. span and damping) — permissible temperatures up to 85 °C — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm (AI2O3 99.9 %) — accessories e.g. mounting flange with cable gland and terminal clamp

This universal range completely protects cables against dust, moisture and technical, thermal or chemical exposure. The versatile SILVYN® CHAIN range of energy supply chains also protect and guide cables in dynamic applications. Properties: — Cable protection hoses and metal or plastic glands suitable for use in a variety of applications. — Suitable for indoor or outdoor use, under various stresses and in various temperatures. — Easy to handle, very robust and durable. — Also halogen-free and available with international licences.

Water and dust protected SCARA robots SCARA robots are also a popular option for small robotic assembly applications in harsh environments with suspended dust, moisture or water spray. IAI offers water and dust protected SCARA robots with 24 V stepper motor or 230 V servo motor. They can be used without further construction measures. The danger of leakage is not given here. One reason for the uncomplicated installation without the need for additional aggregates are their flexibility and the small footprint, which reduces the cost and time required for commissioning.

Increasing Trend: Production in the Cleanroom IAI actuators in cleanroom design are frequently used in the electronics and semiconductor industry, photovoltaic production and medical technology. Due to constantly growing requirements and new legal regulations, they are also increasingly used in other production areas where dust or dirt particles are to be avoided. Stainless steel dust protection band All IAI cleanroom products are classified in ISO cleanroom classes for the maximum permissible particle concentration per m³ of air. With a stainless steel dust protection band, the actuators are sealed and ISO cleanroom compliance is achieved by drawing the air inside the enclosure. Furthermore, the sealed construction also allows the unit to be used, for example, in vertical and horizontal directions (in lateral position), i.e. in the mounting forms that were previously only possible to a limited extent.

For a quick and clean covering of hexagon socket screws. Protection against dust and dirt. Ideal for toolbuilding and mechanical engineering. Material: PE Colours: last digits 113 = white last digits 220 = black last digits 002 = grey

Visual fluid level indication in hydraulic reservoirs with maximum tank pressures not exceeding 2 bar / 29 PSI Nominal Sizes and Designs ▪ 6 nominal sizes from 76 mm / 2.99 in to 305 mm / 12.00 in ▪ Display either undivided (SNA 076 ... 176) or subdivided by strut(s) into 2 (SNA 254) or 3 sections (SNA 305) Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Materials ▪ Housing made of Steel St 12, black powder coating ▪ Sight tube and plugs made of Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) ▪ Scale plate made of PVC Special sight tube materials for improved UV or chemical resistance and use with special media (such as bio-degradable fluids, diesel oils, gasolines, etc.) as well as special sealing materials, e.g. FPM (Viton®), and scale plate materials, e.g. Aluminium, are available on request. Technical Data ▪ IP 65 protection rating: Dust tight and protected against water jets (IP 67 on request) ▪ Operating temperature...

For connection of data processing/Video/HiFi equipment and other appliances, e.g. PC, printer, modem, etc. for industrial, trade and private use. Attractive, timeless, sturdy housing made from aluminium with hardwearing, matt-finished surfaces. Extra robustness. Excess cable can be wound around the housing. Earthed sockets in a 45° arrangement, ideal for angular plugs. Illuminated 2-pole ON/OFF safety switch. With practical hanging facility. Childproof sockets. Packaging: Shrink-wrapped - for protection against dust and contamination. Cable length: 1,8 m Cable: H05VV-F 3G1,5 Length approx.: 34 cm Socket: 4

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 4 or 6mm, connection for 6, 8mm tube or 3/8" Filter: 50µm Dust protection cap, optional Tightness: 1x10-5mbar l/s, 20°C, 100% He

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 4 or 6mm, connection for 6, 8mm tube or 3/8" Filter: 50µm Dust protection cap, optional Tightness: 1x10-5mbar l/s, 20°C, 100% He

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 9mm, connection for 8, 10, 12, 16mm tube or ½" Filter: 50µm Dust protection cap, optional Tightness: 1x10mbar l/s, 20°C, 100% He

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages Two gun connection for stud welding guns

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages Two gun connection for stud welding guns

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages