Dust protection - Import export

U-pockets enable safe and simple handling of fast-changing advertising posters and special offers. The posters are protected from dust and are therefore often reusable. We use UV-stabilized sheet materials.Frame not included in delivery.

COMMERCIAL DEHUMIDIFIER TTK 350 SProfessional all-rounder for demanding drying operations Black and white combined in a powerful device. The TTK 350 S makes you stop thinking in terms of black and white or good and cheap. It is simply both combined in one device, allowing you to benefit from prices at a Far East level without compromising in terms of workmanship and reliability. For the quality of this dehumidifier is no accident – but traditional EU manufacturing. Not only the plastic-coated metal housing but also the stable carriage construction with bar handle and large transport wheels for maximum mobility demonstrate the dehumidifier's robust and durable design. The operating switch and the filling level warning light are protected from dust and spray water by a protective cap, and a slotted hygrostat rotary switch protects against inadvertent misadjustment of the switch position.

TTK 175 S COMMERCIAL DEHUMIDIFIERPowerful drying technology at the top of the game... The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype. All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites. Wheel it in and watch it work – powerful rotary compressor technology in a robust carriage design Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs.

QuickFit Protection Basket Our protection baskets are valuable accessories: they protect against collisions, give additional protection against dust and are an optical enhancement. Like the heaters themselves, they are manufactured in high-grade steel, so that we offer a logical solution regarding both quality of material and optical general impression. QuickFit: You fix our baskets without any further tools or drillholes! Just put the basket over the already mounted RiRo and wedge it, ready!

TTR 250 Ex stainless steel desiccant dehumidifiers For use in Ex-proof zones ... The TTR 250 Ex complies with the ATEX Products Directive 2014/34/EU and was specially developed for dehumidification in hazardous areas (non-conductive dusts). Ex protection: ATEX zone 22 (Ex II 3D Ex c T240 °C) With the TTR 250 Ex you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany. The standard operating hours counter of the TTR 250 Ex is optionally also available as a dual counter for the additional MID-compliant registration of the power consumption. A few practical benefits: * - Robust high-quality dehumidifier “made in Germany” * - Corrosion-resistant stainless steel housing * - Integrated heat recovery * - Self-regulating PTC heating * - Ampere meter to control the operating condition * - Operating hours counter

Extra strong, magnetic document sleeve for metal surfaces. With protective flap to prevent documents from getting dusty or damp. • Magnetic document sleeve with strong adhesive force through two heat-sealed neodymium strong magnets • Use on metallic surfaces, such as meshed containers, pipes and moveable transport containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Protective flap protects inserts against dust and moisture • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502

Visual fluid level indication in hydraulic reservoirs with maximum tank pressures not exceeding 2 bar / 29 PSI Nominal Sizes and Designs ▪ 6 nominal sizes from 76 mm / 2.99 in to 305 mm / 12.00 in ▪ Display either undivided (SNA 076 ... 176) or subdivided by strut(s) into 2 (SNA 254) or 3 sections (SNA 305) Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Materials ▪ Housing made of Steel St 12, black powder coating ▪ Sight tube and plugs made of Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) ▪ Scale plate made of PVC Special sight tube materials for improved UV or chemical resistance and use with special media (such as bio-degradable fluids, diesel oils, gasolines, etc.) as well as special sealing materials, e.g. FPM (Viton®), and scale plate materials, e.g. Aluminium, are available on request. Technical Data ▪ IP 65 protection rating: Dust tight and protected against water jets (IP 67 on request) ▪ Operating temperature...

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 4 or 6mm, connection for 6, 8mm tube or 3/8" Filter: 50µm Dust protection cap, optional Tightness: 1x10-5mbar l/s, 20°C, 100% He

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 4 or 6mm, connection for 6, 8mm tube or 3/8" Filter: 50µm Dust protection cap, optional Tightness: 1x10-5mbar l/s, 20°C, 100% He

incl. check valve and filter Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 9mm, connection for 8, 10, 12, 16mm tube or ½" Filter: 50µm Dust protection cap, optional Tightness: 1x10mbar l/s, 20°C, 100% He

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Fully controlled power source with thyristor bridge For threaded studs up to 8 mm Designed for welding on building sits Self-diagnosis: Overheating and mains phase failure, short circuit control, malfunction of pilot arc Microprocessor controlled Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Stud counter: standard

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages Two gun connection for stud welding guns

plane, compact design 4layer filter media coarse dust protective layer, 2 layers of activated carbon and abrasion protection layer at clean air side activated carbon layer of carbonimpregnated, reticulated PUR foam solid galvanised metal frame, with metal grids on both sides best combination of low pressure drop and adsorption capacities

fako® cleaning and polishing milk no. 9322 is a maintenance agent at your disposal that especially meets the demands of Plexiglass and other acrylic glasses, plastics as well as gel coat finish and fiberglass. It is used for regular care, removal of marks, dirt and minor scratches, oxidation, yellowing and chalking, gives plastics optimum protection with dust-repellent properties and preserves their natural brilliance. Matt panes become radiantly clear again. Maintenance is simple and straight forward with excellent results. The use of fako® Polishing milk does not lead to stress-corrosion cracking.

MIXACO Container Mixer i4MIXACO has been an innovation leader in the mixing industry for years. With the innovative container mixer i4 we are going one step further into the future. Outstanding mixing flexibility, high quality and reduced cleaning effort to a minimum are its outstanding features. Equipped with the new MIXACO Control Center (MCC) we set a new milestone for highly efficient mixing plants. All advantages at a glance * Flat mixing head * Optimized suction * Dust protected machine components * injection through mixer shaft * different container sizes on one mixer * Reduction of cleaning times * Lifting device with container positioning * High flexibility * New tools for more efficient mixing * Lower energy consumption * No base plate

!!!Not suitable for drying animal or vegetable products!!! VIBRATION DRYINGThe G-series dryer gently circulates your workpieces by means of vibration, together with the drying medium. The heated drying medium absorbs the moisture from your workpieces. In addition to drying your workpieces, the relative movement between them and the medium also has a polishing effect. PROTECTING YOUR SENSITIVE PARTS The bowl channel pitch is helically shaped and has no ramp, making the G dryer especially gentle when handling your workpieces. The high heating power is fully adjustable. The heater with replaceable heating elements is assembled separately from the vibrating section. To ensure your working environment is protected from dust, the dryer can also be fitted with a dust extractor.

Safety Relief Valves / Blow-Off Valves WITT safety relief valves (blow-off valves) protect against overpressure by venting excess gases from pipelines, gas receivers and other equipment. The spring-loaded, direct-acting safety relief valves (blow-off valves) are suitable for individual opening pressures from 5 mbar to 45 bar (approx. 0.07 to 1 435 psi). The compact size allows easy installation in any orientation. A dust cap protects the safety relief valves (blow-off valves) against dirt. WITT safety relief valves (blow-off valves) are available in brass or stainless steel, as a ventable version, and with or without condensation outlet.

Facts: — easily running — low empty weight Different versions — Pipe diameter: 50 mm, 30 mm, 80 mm, 60 mm, 40 mm — Tube material: Galvanized steel — axis diameter: 8 mm, 12 mm — Axle material: steel — Axle type: Female thread, spring axle, rigid/smooth — Load capacity according to design (max. 240 kg / roll) Depending on the model: — suitable for lateral tasks — dished roller floor — antistatic — Splash water and dust protection — suitable for high speeds — suitable for heavy goods to be conveyed