Drinking system - Import export

The PEKI valve series made in germany has been manufactured for decades from high-quality brass components that are assembled with modern injection-moulded parts and sealing elements made in Germany. The PEKI compact valve is installed in small compact boxes and as a valve with float in drinking water systems.

Clean water pumps are critical components in numerous applications where clean water needs to be pumped, whether for drinking water systems, industrial processes or agricultural irrigation systems. At AIS Hensch Automation-Industry-Solution we offer a selection of high-quality pumps that have been specifically developed for pumping pure water. High efficiency and reliability: Our pumps for pure water are characterized by their high efficiency and reliability. They are designed to pump large volumes of water with minimal energy consumption and provide stable performance over a long period of time. Powerful design for continuous operation: Our pumps are robustly built and designed for continuous operation. They are resistant to corrosion and wear and offer a long service life, even under demanding operating conditions.

Properties: SYSTEM-CLEANER is a cleaning concentrate which has been specially developed to eliminate organic and inorganic dirt like mucus, residual medication and incrustations in drinking water systems for poultry, pigs and bovines. Application: SYSTEM-CLEANER is particularly suitable for the cleaning of pipe systems, containers, tanks and drinking systems for the animals. Rinse thoroughly with water after use. overall cleaning :2-5 % for 6-12 hours

All products manufactured by us can be equipped with the appropriate corrosion protection according to your wishes and specifications. Epoxy resin coatings Hotspray coatings Hard and soft rubber linings KTL or powder coatings ECTFE/Halar SÄKAPHEN® coatings Pickling and passivation for stainlesssteel applications For drinking water systems, we can of course also provide coating products approved by KTW and DVGW w120

SANHA produces capillary fittings of the series PURAFIT® - just like our press fittings PURAPRESS® - from the completely lead-free premium material silicon bronze CuSi. This copper alloy is optimally adapted for the use in drinking water systems as it fulfills the strict legal requirements of the Drinking Water Directive. By using lead-free PURAFIT® capillary fittings, installers can always be certain that they will not be subject to any legal claims in case the lead tolerances are exceeded. Also, lead-free fittings satisfy the market's desire for safe and healthy drinking water installations. PURAFIT® capillary fittings from CuSi are tested and certified by all relevant national and international certification bodies and can be used for a wide variety of applications in the sanitary and heating industry

The mobile BEULCO disinfection box was developed in accordance with the applicable national standards and guidelines and is primarily designed for the hygienic and safe disinfection of drinking water pipes in public buildings. The disinfection box is particularly suitable for the disinfection of drinking water systems in new buildings and pipeline renovation. Professional disinfection of: — Drinking water installations (buildings, fairgrounds, camping sites, sports facilities, allotment gardens, marinas etc.) — Drinking water hoses — Fittings — Sub-distribution of drinking water e.g. at fairs and markets — Sales stands e.g. at fairs and markets

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.