Results for
SIMPAC EUROPE GMBH
Germany
Compact presses for a wide range of medium sized parts. Due to its drive-related slide kinematics, the MCL series is particularly suitable for drawn parts. Overview: ● Pressing capacity: 3,000 - 8,000 kN ● Component size: medium ● Slide kinematics: link ● Applications: stamping, drawing, forming Features and benefits: ● The compact design requires little floor space and no foundation at presses below 4,000 kN. ● The very solid, low-stress annealed press bodies are FEM-calculated and optimized by so-called “hot-spot analysis” in areas which are subject to higher loads. ● Motor, clutch/brake unit, lubrication system and control are of German origin and guarantee a long service life and maximum dynamics. ● The slide guiding system ensures a high level of tilting rigidity and reduces the cutting impact during the cut through when it comes to the processing of higher-strength materials.
Request for a quoteBURRE HYDRAULIK GMBH
Germany
use with clear water Application: Tube Drawing Engineering
Request for a quoteANTHERMO GMBH
Germany
Special parts In addition to our standard delivery program, we can also procure and deliver special / drawing parts for special applications. This applies to welding outlets, fittings as well as eyeglass blinds and drawing parts. Special know-how Together with our long-term partner companies, we have the necessary know-how to also manufacture unusual drawing parts.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accessories are mainly used in wide range of furniture accessories,such as the door insert, and some cabinet kit and so on...
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the stainless steel 316 turning part for shafts,produce by custom drawing,processing is more complicated.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These parts were made by stainless steel,which is produce from custom-made by drawing picture,we are strictly control the tolerance range to provoide perfects products.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Anodized aluminum is a process that enhances the durability and resistance of aluminum by creating a protective oxide layer on its surface. This layer not only prevents corrosion and wear but also allows for custom surface coloration. Here are some key points about blue anodized aluminum: Color Options: Aluminum can accept a wide spectrum of anodized colors, including blue. Other available colors include pink, black, silver, gold, green, orange, red, and purple.Anodization serves multiple purposes: Corrosion Resistance: The protective oxide layer acts as a barrier against corrosion. Aesthetics: Anodized aluminum looks sleek and reflective due to the uniform oxide layer. Scratch Resistance: The tough anodic finish increases scratch resistance. Other Qualities: Anodization also affects wear resistance, heat dissipation, and adhesion. blue anodized aluminum combines aesthetics with functionality, making it a popular choice for various applications.
Request for a quoteIGUS® GMBH
Germany
robolink® draw wire grippers: Material: PA 2200 Tensile strength open, elasticity closed Stop dog robolink® tube robolink® draw wire grippers: Material: PA 2200 Tensile strength open, elasticity closed Stop dog robolink® tube
Request for a quoteDYMAX EUROPE GMBH
Germany
Dymax GA201 forminplace (FIP)/cureinplace (CIP) gasketing resin is formulated for sealing plastic, glass and metal enclosures, and plated surfaces for automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, tackfree, flexible gasket. Features: - Cures with UV/Visible light - Moisture resistant - Chemical resistant - Tackfree cure - Soft, durable after complete cure - Conforms to intricate channels and recesses - Compliant with RoHS directives 2015/863/EU
Request for a quotePRESSTECK S.P.A.
Germany
For our customers in the automotive and housing industry, we produce deep-drawn stainless steel pots with an integrated axle as a monobloc component. These are used in water pumps for electric vehicles. Our customer from the automotive industry needs pots with an integrated axle that holds a rotor. Up to now, the pot and axle have been joined in a centred manner by means of welding. The customer's wish was to produce a one-piece component to avoid welding. Deep drawing is the ideal technology for this. The size of the component required larger presses than were previously available. Therefore, we first developed tools as prototypes for larger presses on behalf of the customer. After practical tests at the customer's premises as well as at the end customer's, our client decided on a tool that was ideally suited for the production of the component in series.
Request for a quotePRESSTECK S.P.A.
Germany
Deep drawn cylindrical battery housings made of nickel plated steel Various standard sizes of cylindrical battery housings for edrive applications like 21700, 46800
Request for a quotePRESSTECK S.P.A.
Germany
We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm. Pharmaceuticals and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.
Request for a quotePRESSTECK S.P.A.
Germany
You don't need deep-drawn individual parts, but complex assemblies already assembled? We are your experts for that! First we analyse your requirements for new potentials. Combined with innovative thinking and agile processes, we then design smart solutions with you to manufacture your desired assemblies. Depending on your requirements, we develop decoupled, partially or fully interlinked assembly processes using high-performance systems and state-of-the-art equipment. We reliably ensure your quality requirements with integrated and individual testing measures.
Request for a quotePRESSTECK S.P.A.
Germany
Pressteck is one of the world's leading specialists for deep-drawn individual parts on transfer presses and their processing into assemblies. In this non-cutting tension-pressure process, we produce hollow parts from a metal strip in several stages, which can be aluminium, stainless steel, copper or brass, among others. Compared to other processes, deep drawing has decisive advantages: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and optimise deep drawing technology beyond what is currently possible. We manufacture your individual component from coiled sheet metal and master demanding geometries and high degrees of forming.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Coating of threads with galvanized surfaces and high-alloy steel threads to achieve controlled friction values Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral With an inhibitor, which prevents from corrosion during the drying
Request for a quotePRESSTECK S.P.A.
Germany
Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the customer's downstream process under very tight tolerance specifications. Why? Because the sleeves cannot be further processed if the geometries vary. Absolute precision is therefore required. We can offer absolute precision. The customer commissioned us with the production of the sleeves. On the one hand, because we fulfil the special deep-drawing requirements. On the other hand, because we can offer an associated, targeted heat treatment for material stress relief in-house.
Request for a quoteWILH. KÄMPER GMBH U. CO KG
Germany
Parts are made to custom design from drawings, from very small quantities to industrial mass application, in a wide range. We work with steel, stainless steel, copper and aluminium wire and can also implement your surface requirements.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MICRO-EPSILON
Germany
The wireSENSOR mechanics from Micro-Epsilon are designed for mounting of incremental and absolute encoders. They enable you to individually determine the interface, the resolution and the type of connection which can be adapted for further signal processing. High quality precision components and their robust design ensure high operational safety and a long service life even under harsh industrial conditions of use. For series applications involving a large number of pieces, we develop and manufacture tailor-made OEM designs.
Request for a quoteMICRO-EPSILON
Germany
Miniature MP and MT draw-wire sensors are designed for measurement tasks with fast wire movements. Their robust aluminum housing makes the sensors suitable for industrial applications. The MP and MT draw-wire sensors are equipped with a potentiometer.
Request for a quoteMICRO-EPSILON
Germany
P-series draw-wire sensors are designed for industrial measurement tasks. A compact and robust aluminum housing protects the sensor from mechanical influences. As well as analog versions with potentiometer, current or voltage output, digital versions with incremental or absolute encoders are available, providing measuring ranges up to 50 m.
Request for a quoteMICRO-EPSILON
Germany
The K and MK draw-wire sensors are specially designed for series applications with large numbers of pieces. The user benefits from an excellent price/performance ratio and compact sensor dimensions, therefore gaining new potential in design and cost optimization. As well as analog versions with potentiometer, current or voltage output, digital versions with incremental or absolute encoders are available.
Request for a quoteMICRO-EPSILON
Germany
Draw-wire sensors of the wireSENSOR series measure almost linearly over the entire measuring range and are used for distance and position measurements between 50 mm and 50,000 mm. Draw-wire sensors from Micro-Epsilon are ideal for both direct integration and subsequent assembly in serial OEM applications, e.g., in medical devices, lifts, conveyors and automotive engineering.
Request for a quotePRESSTECK S.P.A.
Germany
We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm.Pharmaceutical and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.
Request for a quoteANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
unprecedented opportunities thanks to newest 3D-print technology: whether ultra-stable up to 103°C/217,4°F heat-resistant plastic parts or elastical silicone up to 65 shore – we can meet your very special needs on a wide range – with a print resolution of up to 15 μm! Realizing ideas quickly: we print your prototypes, devices, models, sales samples, artworks or even final products made of plastics or silicone. For your individual 3d-print, we need your data-model in STEP- or STL-format. We are looking forward to your inquiries!
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteDEKORTECH GMBH
Germany
Strong, water-based adhesive disperion for heat transfers. ✔ For many materials ✔ Different application temperature ✔ Low Viscosity ✔ Great price ✔ Clear coating Our water-based adhesive dispersions are made for heat transfer printing. With different base materials from PU to acrylics, we can create the right adhesive for your applications. Our main products are the MT-I adhesive, which adheres to many materials at temperatures from 50 - 100°C with great hot tack. The second is PPT-I, which adheres to untreated polypropylene at low temperatures. The main use if in combination with toner-based prints, but they can be used with other prints as well. Once we know the application, we can help you find the right adhesive for it!
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides
Request for a quoteDEKORTECH GMBH
Germany
Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Strong hot-tack ✔ Application temp.: 50 - 100°C ✔ For ABS, SAN, PET and more Our MT-I hot melt dispersions is tailored for heat transfer printing. With a wide activation temperatur range it can be used also on materials like PET. Futhermore, the formulation creates and adhesive film which has a high hot tack. Due to this it is easier to achieve great bonds and to print at higher speeds. It shows good adhesion on many materials, which makes it a great adhesive to skip cleaning the coating equipment. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional like pens. It shows good resistance against water. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.
Request for a quoteSAMSYS GMBH
Germany
SAMSYS offers Spindle Liner for draw tube diameters from 38mm to 100mm. The length of the reduction tube depends on the length of the draw tube, as well as the clamping device and the type of clamping cylinder. The reduction tube consists of a precision steel tube as support tube (1). In order to ensure optimum guidance, the rear (2) and the front (3) guide are adapted to the lathe. Mounting as well as dismounting can be done in a very short time with a few simple steps, as the reduction tube is only attached to the clamping cylinder with two screws. The POM bushings (4) can be flexibly adapted to the material diameter. Since you do not need to store a reduction tube for every diameter, you save valuable storage space. A Water pan extension (5) is also available as an option for safe covering and splash protection.
Request for a quoteResults for
Drawing - Import exportNumber of results
61 ProductsCountries
Company type
Category