• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • components

Results for

Components - Import export

GermanyManufacturer/producer

Germany

Verified by Europages

Demag components for process cranes turn a crane into a fully fledged process crane, without the need for any additional design or development work. They're fast, safe and reliable, making these components extremely worthwhile elements of the Demag process crane engineering product line. The individual components – MPW open winch units, MPW open winch crabs and corner-bearing end carriages – are proven components that have been tried and tested for many years. They are individually configured to meet the specific requirements of your process crane. The variety of possible applications is virtually unlimited. See all the performance details and benefits on the product pages.

Request for a quote

Germany

Verified by Europages

The combination of crane control and wireless control concept creates the link between an operator and a crane and thus makes optimum load handling a tangible experience. Absolutely safe operation of a crane or a system of several cranes must always be guaranteed – safety for the crane operator as well as for the transported goods and surrounding infrastructure. The smart Demag SafeControl system enables independent and continuous monitoring of a crane on the basis of a largely redundant control concept to bring the system to a standstill independently if any irregularities occur. Furthermore, dangerous conditions can be identified and prevented in advance. The crane operator can concentrate fully on his/her work at all times thanks to the safety control system. A crane can be conveniently and intuitively controlled by radio, which is also very efficient. The safety control system combined with radio control can ensure gentle handling and precise positioning of loads.

Request for a quote

Germany

Verified by Europages

— For distributing the steam mass flow to the relevant consumers — Reduction in network loss due to centralised distribution in systems with complex consumer structures — Savings thanks to centralised operation and maintenance Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

— For the cooling of blow-down water and the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Rigorous compliance with official requirements thanks to automatic operation — Fast and easy assembly, requires just a small number of connections before it can be used

Request for a quote

Germany

Verified by Europages

— Blow-down, expansion and cooling module for cooling blow-down water to the permissible temperature — Fast and easy assembly, requires just a small number of connections before the Blow-down, expansion and cooling module can be used — Rigorous compliance with official requirements thanks to automatic operation

Request for a quote

Germany

Verified by Europages

— For increased system efficiency and reduced fuel consumption of up to 2% — Prewarming of the combustion air takes over a small portion of the thermal output of the burner — Lower investment costs in comparison with conventional solutions, low amortisation time — Lower maintenance and servicing costs

Request for a quote

Germany

Verified by Europages

— For the reliable fuel supply with oil — Suitable for all Bosch boiler systems with oil burner and ring mains supply — Preassembled for fast installation — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

— Secure use of condensate in steam boiler systems — Decreases in energy and water consumption due to reduced quantities of make-up water — Minimisation of flash steam losses, desalting and blowdown quantities; reduced consumption of chemicals — Reduced corrosion potential in the steam condensate system when using high-pressure condensate systems

Request for a quote

Germany

Verified by Europages

— For continuous feed water control — Increased efficiency of flue gas heat exchangers — Fewer pump circuits — Constant boiler water level — Minimum flow rate for cooling the feed pump is assured Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

— For the reliable fuel supply with gas — Preassembled for fast installation — Rigorous compliance with official requirements — Increased operating reliability — Also for biogas- and hydrogen-fuelled systems Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

— For the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Fast and easy assembly, requires just a small number of connections before it can be used Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

— For recovering heat from flash steam from thermal water treatment — Heat recovery and thus efficiency improvement — Energy produced can be used for additional heating or for transfer to a separate water circuit Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

— Save up to 1.8% in fuel costs through a higher level of waste heat utilisation — Easy retrofitting to older systems thanks to a small space requirement and simple piping — Matched control for safe operation of the boiler and components — Quick amortisation, even on systems with few operating hours — Ready for operation with just a few connections — Simple commissioning, operation and maintenance

Request for a quote

Germany

Verified by Europages

— For maintaining constant pressure — Preassembled for fast installation — Increased operating reliability — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

— For the reliable fuel supply with oil — Preassembled for fast installation — Reliable recording of oil throughput — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

The water analyzer measures residual oxygen concentration, pH values and conductivities of the boiler feed water and pH values of the boiler water. — For the fully-automatic measurement and monitoring of the boiler water quality — Increase in operating safety thanks to continuous monitoring of the water values — Automated monitoring with constant measurement of the pH value, oxygen content and conductivity — Savings on chemicals thanks to needs-based dosing of additives — Increased system efficiency through reduced desalting losses and saving of exhaust vapour energy — A water analysis device can monitor up to three boilers at a time and be integrated into plant control systems with control technology

Request for a quote

Germany

Verified by Europages

— For the prewarming of viscous fuels — Suitable for all Bosch boiler systems with oil burner and ring mains supply — Increased operating reliability — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Verified by Europages

— For the extraction of the feed water/condensate — Consumes less power, more convenient to operate — Speed-controlled version for increased flue gas heat exchanger efficiency — Redundant pump for maximum reliability of supply — Preassembled for fast installation Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Verified by Europages

— For covering short-term peak loads — Compensates for brief power peaks — Reduces water entrainment and counteracts its negative effects — Reduces switching frequency of steam generator — Reduces energy consumption and wear Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

Request for a quote

Germany

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

Request for a quote

Germany

fako® Glass fibre adhesive 9119Xtra is a solvent-free plastic dispersion adhesive, which is characterized by high elasticity and initial adhesion, a thixotropic one-component adhesive with short drying time. fako® glass fibre adhesive no. 9119XTRA complies with the requirements of IMO FTPC part 5 for low flammability, and is affixed with the «Wheelmark» (mark of conformity), the European regulatory marking of all marine equipment, as defined in the Marine Equipment Directive (IMO/MED). Application area: in shipbuilding for "A", "B" and "F" class divisions. Purpose: bonding of glass fabric to mineral wool in pipe and surface areas, bonding to sheet metal, as well as for production of glass fiber fabric cover on rubber products (e.g. Armaflex). It can be used on all load-bearing surfaces, such as plaster, plasterboard and concrete.

Request for a quote

Germany

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

Request for a quote

Germany

With Conform® components our customers can reduce their procurement and assembly costs: We handle the preceding processes thus enabling slimmer procedures at our customers’ own production facilities. So that we can meet the wide variety of component needs for our customers, we work within a network of certified partners. Some examples of components made to customer specifications: cold-formed parts in steel cold-formed parts in aluminium rubber decoupling elements plastic injection-mouldings stampings metal bending parts non-detachable washers or sealing rings

Request for a quote

Germany

Verified by Europages

Components made from aluminium are created in accordance with your drawings or data. Various surfaces can be generated. The production options at our company are very varied thanks to our comprehensive machine park.

Request for a quote

Germany

Verified by Europages

In addition to complete OEM devices, Gronbach produces a wide range of mechanical components for the household appliance industry, which are characterised by dimensional accuracy and durability. Our products can be used both in the visible area of kitchens and gastronomic facilities and as ready-to-install functional components. We develop and produce material- and production-optimized according to your specific requirements. In addition, we develop and produce material- and production-optimised designs of assemblies according to individual customer-specific requirements, e.g. hinges, front panels, frames and pull-outs, and assemble these ready for installation. We realize small series of special products as well as large series.

Request for a quote

Germany

Verified by Europages

Gronbach manufactures decorative elements for the automotive industry in interior and exterior areas such as trim strips or trim parts made of aluminium, stainless steel and plastic hybrid technology. Functional components and plastic injection molded parts with a focus on fan wheels and turbines are also essential components of our technologies. As a specialist for surface finishing, you have a wide range of colours (anodising, powder coating), noble shapes and surfaces (brushing, grinding, polishing, blasting) and high-quality individualisation (screen printing, pad printing, under-anodising printing, laser engraving, etching techniques) at your disposal. In addition to the production of individual parts and the manufacture of complex assemblies as well as end products, we also offer you as a system supplier the complete project planning for new developments. Our portfolio includes: Automotive door sills Interior visible parts, e.g. side applications, decorative panels and...

Request for a quote

Germany

Verified by Europages

High-precision Aspheres and Acylinders The use of aspheres and acylinders offers substantial advantages: minimization of aberrations, increase in efficiency, reduction of optical elements and weight of the optical system. With its unique molding technique, INGENERIC combines cost effectiveness with highest serial precision. Molded optics can be structured/curved on one or both sides with a large degree of geometrical freedom and a flexible lateral contour. The lateral dimensions range approximately from 2.0 mm to 5.0 mm. Structures in the sub-millimeter range are feasible. Acylinders with larger dimensions are manufactured by INGENERIC’s well-proven grinding and polishing technology. The dimensions of these large acylinders can reach 60.0 mm in length and 120.0 mm in height. This technology is particularly adept for the manufacture of fused silica optics for applications with high power densities. Advantages superior image quality freedom of design free form surfaces integrated...

Request for a quote

Germany

Verified by Europages

Microlens-Arrays with superior form accuracy are used for applications, where reliability and highest efficiency are crucial criteria. They range from beam transformation for fiber coupling over the homogenization of laser light up to the efficient combination of laser stacks of identical wavelength. The lateral dimensions of the arrays range from some millimeters in the micro-scale up to 30 millimeters for the macro-scale. The dimension of the array structures are typically in the sub-millimeter-range. With its unique production technique, INGENERIC is able to keep the form accuracy of the arrays within the submicron range. Advantages superior beam shaping efficient transformation and homogenization monolithic structure highes transmission due to minimized transition zones typical facet of 400um long term stability

Request for a quote

Germany

Verified by Europages

INGENERIC C-Module The Collimation Module (C-Module) is a highly efficient means of reducing the divergence of diode lasers in the fast- and slow-axis simultaneously. The module consists of two micro-optics, fixed and aligned in one single module with high precision. Alongside its optimum collimation characteristics the module guarantees a simple and cost efficient assembly of diode lasers. The compact C-Module thus guarantees highest brightness of diode lasers in combination with minimum size. Please refer to our broad product spectrum of fast-axis and slow-axis collimators to combine your C-Module for your specific application. Advantages efficient collimation optimized for highest brightness compact module easy to mount transmission up to 99% highest level of precision and uniformity long term stability optimized design

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free