Body work - Import export

Quality at every level Safe transport and short throughput times — Lödige‘s material handling solutions easily accommodate all the demands made on them whether within the paint shop or in provision and intermediate storage after the painting process. Your advantages using Lödige solutions in the paint shop: Materials handling in multiple dimensions Connection to intermediate store Connection to body shell store Work stations Internal and external materials handling systems Materials handling systems and control technology from one source

single acting plunger Ø 16 mm, stroke 15 mm max. load force 9,5 kN off-position retracted contact con oil pressure and spring force max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 9,5 kN off-position retracted contact con oil pressure and spring force max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 15 mm max. load force 6,5 kN off-position retracted contact con oil pressure and spring force max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 9.5 kN off-position retracted contact with air pressure max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 6.5 kN off-position retracted contact with air pressure max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 9.5 kN off-position extended contact by spring force max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 6.5 kN off-position extended contact by spring force max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 6.5 kN off-position retracted contact con oil pressure and spring force max. 500 bar, as per data sheet B1.940

with long shaft, shaft length 70 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 60 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 50 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 40 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 30 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 20 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 50 mm single acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 40 mm single acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 20 mm single acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

The surfaceCONTROL 2500 measuring system is used for defect detection on diffusely reflecting surfaces. In combination with robots, the surfaceCONTROL 2500 is used for fully automatic defect detection on body shells. This system works according to the method of fringe light projection. By means of a learning process, local form defects such as bumps, dents, etc. are reliably detected, while permissible deviations are tolerated. The surfaceCONTROL systems consist of sensor, robot, computer and software and interface package. Different versions of the system are available, which are configured according to customer-specific requirements. The number of reflectCONTROL sensors and robots required can be flexibly adapted to the required throughput.

The KAUP hook-on Fork Positioner T411Z is a robust attachment for exceptionally heavy duty operation - ideal for uneven surfaces. Spreading forces induced, for example when handling coils (several) cable drums, rolls or wire coils, can readily be supported due to the large overlap of sectional profiles between fork guide and clamp body. Speedy working cycles and millimetre accurate positioning of the transport load is possible.

5-axis/5-sided machining means the C 42 lends itself to be used in every application area. With traverse paths adapted to the workpiece size and perfectly designed for 5-axis applications, the C 42 is ideal wherever complex, close-tolerance components are required. This includes various applications in the tool and mould making, medical, aerospace, motorsport, machine sectors and other industries: The C 42 machining centre is at home in every area. The space-saving circular tool magazine integrated into the base body of the machine works according to the pick-up principle - thus enabling quick tool changes. In the standard version, the C 42 can hold 42 tools and can be extended to 192 pockets. The control panel can be easily adjusted to the respective user. Milling and turning in one clamping with the C 42 U MT dynamic model. Fully integrated rotary table that does not interfere with demanding milling processes and 5 axes simultaneously.

For short-term use outdoors, IP 44. Extension cable reel with plug and trailing socket. Cable reel with 2 m cable for connecting to the power source. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. With hinged rotary handle for comfortable rolling up. The BREMAXX® cable is extremely sturdy, highly flexible even at low temperature down to -35 ºC, oil- and UV-resistant and highly abrasion-resistant. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 48 + 2 m Cable: AT-N05V3V3-F 3G1,5 Cable quality: BREMAXX® Cable colour: Red Reel-Ø: 290 mm

For short-term use outdoors, IP 44. Extension cable reel with plug and trailing socket. Cable reel with 2 m cable for connecting to the power source. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. With hinged rotary handle for comfortable rolling up. The BREMAXX® cable is extremely sturdy, highly flexible even at low temperature down to -35 ºC, oil- and UV-resistant and highly abrasion-resistant. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. Patent pending. Cable length: 23 + 2 m Cable: AT-N05V3V3-F 3G1,5 Cable quality: BREMAXX® Cable colour: Red Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. Rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. / Patent pending. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from highly break-resistant, special plastic on a particularly sturdy frame. With hinged rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design Patent. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

Body material is excellent corrosion resistant stainless steel (SUS304). Suitable for use in tough / harsh environments such as offshore applications. Sleeve stopper mechanism can be engaged by rotating sleeve after connection. Despite having a stainless steel body, the working pressure, 21.0 MPa, of HSU CUPLA is comparable to that of special steel body CUPLA such as HSP CUPLA series. Both socket and plug have builtin automatic shutoff valves that prevent fluid outflow on disconnection. Easy to handle. Hydrogenated nitrile rubber (HNBR) is used as a seal material for wide variety of liquids.

The planishing hammer GL 2 is the perfect tool to give the best possible surface finish on sheet metal parts already preformed. Even fine laser seams can be quickly and easily smoothed with the GL 2 planishing hammer. The ECKOLD GL 2 comes into play wherever sheet metal needs to be formed by hand. The GL 2 is used in car body repairs, vintage car restoration, appliances production, furniture design and even the arts and crafts sector. The planishing hammer is also extremely suitable to correct warpage after edging. The ECKOLD GL 2 planishing hammer is supplied with special inserts for planishing, stretching and curving. ECKOLD now offers special plastic inserts for forming without damage to the surface, and inserts with flexible shafts for better access to corners and edges. This GL 2 planishing hammer KIT 1 with a handy wall bracket, consisting of: Planishing hammer GL 2 Planishing insert steel Stretching insert steel Curving insert steel Order now!

The planishing hammer GL 2 is the perfect tool to give the best possible surface finish on sheet metal parts already preformed. Even fine laser seams can be quickly and easily smoothed with the GL 2 planishing hammer. The ECKOLD GL 2 comes into play wherever sheet metal needs to be formed by hand. The GL 2 is used in car body repairs, vintage car restoration, appliances production, furniture design and even the arts and crafts sector. The planishing hammer is also extremely suitable to correct warpage after edging. The ECKOLD GL 2 planishing hammer is supplied with special inserts for planishing, stretching and curving. ECKOLD now offers special plastic inserts for forming without damage to the surface, and inserts with flexible shafts for better access to corners and edges. This GL 2 planishing hammer KIT 3 with carrier case, consisting of: Planishing hammer GL 2 Various planishing, stretching + curving inserts steel + synthetic Order now!

The container rollers 4337.3,5 with a load lift of 3,5 tons, for lifting and moving standard containers. Can be used on solid ground. The roller set consists of four corner brackets and a drawbar. This product is suitable for an operating speed of up to 6 km/h.