Apparatus - Import export

Test OK or NOK. Locking ring assembly over envelope circle

Where are magnetic field mats used? The coils currently manufactured by us are processed by our customers into so-called electromagnetic field mats. These mats are used in Pulsed Electromagnetic Field (PEMF) therapy. Many PEMF devices are suitable for private use at home. However, various health service providers including physical therapists as well as non-medical practitioners offer therapies based on magnetic fields. Why is our embroidery technology used for production? This technique creates circular-shaped structures that form the basis for a homogeneous flow/direction of the electric current. At the same time, the mechanical wire laying has an extremely high level of accuracy. The distances can also precisely be determined. How is the magnetic field created? Simply put, this is how electromagnetic fields are created: pulsating magnetic fields are generated by the electric current flowing through the wire. The more wire, the stronger the magnetic field.

A quartz material / glass-encased, spiral-shaped, electrical heating coil with a large surface, which is mounted in a quartz material reflector shell with a handle, allows liquids to be heated indirectly by infrared radiation. This is used for the fast, economical evaporation or concentration of liquids. Due to this principle, only the surface of the liquid is heated very strongly, as the thermal radiation is absorbed even after shallow penetration, thus enabling gentle, uniform evaporation.In contrast to boiling evaporation, there is no loss of substance due to splashes from a moving boiling surface. Since surface evaporators are made exclusively from the material fused quartz / glass, it is possible to use the advantages of the material, such as good IR permeability, heat and heat change resistance, lowest electrical conductivity, exceptionally high chemical purity and resistance as a material. It complies with EC Directive 89/336 / EEC and EC Directive 73/23 / EEC.

Immersion heater for laboratory and electroplating technology Advantages: Maximum energy utilization through infrared radiation - the cladding tube is infrared permeable; through heat conduction - the cladding tube made of quartz glass enables particularly good heat transfer. Temperature resistance Since quartz glass has practically no thermal expansion, such immersion heaters are particularly resistant to heat changes. Acid resistance Quartz glass immersion heaters are almost resistant to acids except phosphoric acid above 300 ° C and hydrofluoric acid. They are therefore particularly suitable for the direct heating of chemicals in the laboratory and electroplating technology. electric security The cladding tube made of quartz glass is an excellent electrical insulator - safe contact protection; optimal electrical safety through earthing of the interior. In compliance with EC Directive 89/336 / EEC and EC Directive 73/23 / EEC.

Leather for gymnastics apparatus and technical uses The classical vaulting horse, the traditional leather gasket or the keg and cask drop pads & mats to receive beer barrels dropped from greater heights. For special uses, we offer special leathers.

Leather for gymnastics apparatus and technical uses The classical vaulting horse, the traditional leather gasket or the keg and cask drop pads & mats to receive beer barrels dropped from greater heights. For special uses, we offer special leathers.

Leather for gymnastics apparatus and technical uses The classical vaulting horse, the traditional leather gasket or the keg and cask drop pads & mats to receive beer barrels dropped from greater heights. For special uses, we offer special leathers.

Leather for gymnastics apparatus and technical uses The classical vaulting horse, the traditional leather gasket or the keg and cask drop pads & mats to receive beer barrels dropped from greater heights. For special uses, we offer special leathers.

Leather for gymnastics apparatus and technical uses The classical vaulting horse, the traditional leather gasket or the keg and cask drop pads & mats to receive beer barrels dropped from greater heights. For special uses, we offer special leathers.

The TMB series was specially developed for installation in small systems and apparatus. The single-stage Centrifugal pump offers robust technology in the smallest space. * Drive is via a magnetic coupling * Typical applications: Acids, alkalis, acid and alkali mixtures, solvents, alkaline degreasing baths, electroplating baths, photographic chemicals Features & Advantages * Variable connection options * Compact dimensions, performance in line with requirements * Connections with BSP thread or hose nozzle * Ideal for mobile use * Motor and pump are mechanically separated

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FTSS355-Q2 laser emits pulses with a pulse width of approx. 1 ns at 355 nm and can be modulated from single shot to 10 kHz. The pulse energy is 3 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FDSS532-Q1 laser emits pulses with a pulse width of approx. 1 ns at 532 nm and can be modulated from single shot to 20 kHz. The pulse energy is 2 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FDSS532-150 laser delivers 150 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.2 ns, i.e. a peak pulse power of 125 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FTSS355-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 60 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA1064-650 is a high-peak power MOPA with a peak pulse power of over 400 kW. It delivers 650 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The DSS1064-3000 laser delivers 2.5 mJ pulse energy at a repetition rate of 20 Hz and a pulse width of 2.5 ns, i.e. a pulse peak power of 1 MW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The DSS1064-450 laser delivers 450 µJ pulse energy at a repetition rate of up to 100 Hz and a pulse width of 1.7 ns, i.e. a pulse peak power of 250 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FQSS213-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 30 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 40 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA532-700mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 35 µJ single pulse energy and an average power of up to 700 mW. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FQSS266-200 laser delivers 200 µJ pulse energy at a maximum repetition rate of 20 Hz and a pulse width of 1.5 ns, i.e. a peak pulse power of 130 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FQSS266-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.1 ns, i.e. a peak pulse power of 45 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FTSS355-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 60 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The DPSS-CW-DUV laser FQCW266-300 delivers an output power of 300 mW in single-mode operation at a wavelength of 266 nm. Other models in the high-power series are available with optical output powers of up to 1 W. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 30 mW to 300 mW. The power consumption of the laser is less than 450 W. The laser comes with a software for control of the main functions by a PC.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q2 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 10 kHz. The pulse energy is 20 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA355-500mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 25 µJ single pulse energy and an average power of up to 500 mW. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q1 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 20 kHz. The pulse energy is 10 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q3 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 2.5 kHz. The pulse energy is 50 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The DPSS-CW-DUV laser FQCW266-50 delivers an output power of 50 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 5 mW to 55 mW in 0.5 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.

The DPSS-CW-DUV laser FQCW266-1000 delivers an output power of 1000 mW in single-mode operation at a wavelength of 266 nm. Other models in the high-power series are available with optical output powers of from 300 mW up to 1 W. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 10 mW to 1 W. The power consumption of the laser is less than 450 W. The laser comes with a software for control of the main functions by a PC.