Angular - Import export

The angular beaker, available in three different sizes, is particularly flexible and enables precise sampling. The position of the beaker can be set at different angles so that samples can be taken from different depths and surface conditions, even from areas that are difficult to access. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Angular expansion joints absorb movements perpendicular to the bracing lane. The reaction forces caused by the internal pressure are absorbed by the hinge frame. In pipelines of larger nominal size and high pressure only tensioned angular expansion joints in the form of hinge-systems are able to absorb the expansion. Thus, for pipelines expansion joints are only installed as hinge-systems (combination of either 2 or 3 expansion joints). Those are L-, U- or Z-shaped. This requires additionally a 90 ° redirection of the pipeline. Thereby, stress due to inner pressure will be absorbed by the hinge tensioning. In case those systems cannot be applied due to missing space, special-purpose solutions like pressure-balanced expansion joints can be installed.. Types of design for angular expansion joints: Single hinge angular expansion joint for movements in one plane gimbal hinge angular expansion joint for omnidirectional movement

Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively.

Series DRVL torque transducers are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and no maintenance. These transducers are also available with optional speed and angular measurement for a host of applications. The integrated signal amplifier is powered with 10 - 28,8 V DC and outputs an electrically isolated analog signals of 0 ± 10 V and 10 kHz ± 5 kHz. The standard version has smooth shaft ends, several types are available with optional keyways

We design our angular contact ball bearings especially for bearing arrangements that have to support combined loads such as radial and axial forces acting simultaneously. As the name suggests, in angular contact ball bearings the forces are transmitted from one raceway to the other at a specific contact angle, oblique to the radial plane. As the nominal pressure angle increases, so does the axial load carrying capacity. Our KIS range includes single-row angular contact ball bearings as well as bearings arranged in pairs. Depending on the application requirement, which for example has a small installation space and requires a rigid bearing arrangement, a double-row design may also be suitable. We are happy to work with you to find the perfect KIS solution for your application.

The SAP10/3P is a high quality machine for attaching hinges with fastening prongs from the roll. The hinges are attached to your product (cases, caskets…) using this machine. Benefits / Characteristics can be used for various materials (thin walled wood types, cardboard…) precision attachment of angular spring hinges consistent high quality ease of operation meets current machine regulations 2006/42/EU “CE“ only branded components used very maintenance friendly service and maintenance available Made in Germany Technical data Dimensions: Length 1,000 mm Width 570 mm Height 1,000 mm Weight: ca. 75 kg Noise emission: 65 dB(A) Pneumatic operating pressure: 6±0,5 bar Cylinder compression force: 2 x 4700 N Work space (0720-2977.20): Length (A) 40 – 360 mm Length (B) 10 –infinite Length (C) 25 – infinite Work space (0720-3034.20): Length (A) 50 – 360 mm Length (B) 16 –infinite Length (C) 40 – infinite Work space (0720-2981.20): Length (A) 50 – 360 mm Length (B) 16 –infinite Length (C)...

Two-stage gear drive with solid shaft Gear Type: SN12 Motor Type: Three-Phase, Direct Current and Permanent Magnet DC Mounting: Gear Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN6F Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN6 Motor Type: Three-Phase and Direct Current Mounting: Motor Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN10SV Motor Type: Three-Phase and Direct Current Mounting: Gear-Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN14 Motor Type: Three-Phase and Direct Current Mounting: Gear Foot / Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN18 Motor Type: AC-Three-Phase 230/400V (Also available: DC 180/200V, DC-Permanent-Magnet 24V) Mounting: Gear Foot / Flange Shaft design: Solid Shaft Ø10x30 Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN5FR Motor Type: Three-Phase, Direct Current and Permanent-Magnet DC Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN5FL Motor Type: Three-Phase, Direct Current and Permanent-Magnet DC Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear with ingoing and outgoing shaft Gear Type: SN17A Mounting: Gear Foot Ausgangswelle: solid shaft Additional Data: — Ball bearings for ingoing and outgoing shaft — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN10SH Motor Type: Three-Phase and Direct Current Mounting: Gear-Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN12X Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN12F Motor Type: Three-Phase, Direct Current and Permanent Magnet DC Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN10F Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear with ingoing and outgoing shaft Gear Type: SN17B Mounting: Gear Foot Ausgangswelle: solid shaft Additional Data: — Ball bearings for ingoing and outgoing shaft — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN18H Motor Type: Three-Phase, Direct Current and Permanent-Magnet DC Mounting: Gear Foot / Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN13F Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN9SV Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN9F Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN8SH Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN8F Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN8SV Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Modular single-stage gear drive with or without solid shaft Gear Type: SN5VH Motor Type: Three-Phase and Direct Current Mounting: Foot or flange Ausgangswelle: Hollow shaft or solid shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN12FX Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.