Aluminium wires - Import export

Aluminium wire We manufacture hard drawn and annealed aluminium wire at our site in Rothenburg/Saale. Materials / DIN EN E-aluminium according to EN 60889 Aluminium-magnesium-silicon alloys according to EN 50183 Aluminium content min. 99.5 % Aluminium for cold forming parts

The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.

By means of a hinge, the edge protector SKD can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

Parts are made to custom design from drawings, from very small quantities to industrial mass application, in a wide range. We work with steel, stainless steel, copper and aluminium wire and can also implement your surface requirements.

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

The differential pressure transmitter DPT 100 has been especially designed for fast test processes in leakage and flow measurement, where a fast response time and high sampling rate are necessary. The compact design of the DPT 100 facilitates the use in standardised applications, e. g., and the installation in 19“ Rack. The DPT 100 with optionally RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Features: — differential pressure from 10 mbar up to 20 bar — static pressure max. 400 bar — accuracy: 0.1 % FSO — output signal 4 ... 20mA / 2-wire — aluminium housing, die casting Optional Features: — output signal RS485 with Modbus RTU protocol — several process connections

The AIRPURION 90 active consists of a matt anodized and completely closed aluminium frame. Wiring system and the electronic cut-in unit are integrated into the frame. The air is guided along the PURION UV-lamp inside the housing via fan. Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension for assembly. advantages: continuous operation, even if there are people staying in the room not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The AIRPURION 48 active consists of a matt anodized and completely closed aluminium frame. Wiring system and the electronic cut-in unit are integrated into the frame. The air is guided along the PURION UV-lamp inside the housing via fan. Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension for assembly. advantages: continuous operation, even if there are people staying in the room not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The central product of WDM Deutenberg are spot-welded wire meshes according to individual specifications. There are four different wire materials used to produce our wire meshes and wire mesh elements: bare wire, galvanized wire, aluminium galvanized wire and stainless steel wire. Our spot-welded wire meshes have different sizes from 300 x 250 mm to 8,000 x 2,400 mm depending on mesh width and wire diameters. Mesh widths between 20 mm x 20 mm minimum and 150 mm x 150 mm maximum and diameters from 2.0 mm to 18.0 mm are possible. The scope of application of our spot-welded wire meshes is very diverse. They are used in industries such as landscaping, agriculture, engineering, shopfitting, metalworking, food industry, electrical industry, construction industry or retail. Please call us for further questions under +49 (0) 38789 / 879-0 an or write us an e-mail to info@wdm-wolfshagen.de.

Any device is only as reliable as the sum of its components. With more than fifteen years of experience in manufacturing tuned and detuned filter reactors for power factor correction, we are now offering our range of line reactors for application in power electronics. Same as with our capacitors, we focus on minimized power losses and maximum durability of the reactor – optimized for your application. Made of high-class transformer sheets and copper wire or aluminium band. Vacuum-impregnated with environmentally friendly, low-styrole resin for long operating life, high voltage strength and low noise levels. Standard terminals: copper terminal lugs, optional with screw-terminal blocks or cables. Integrated reversible thermal switch for monitoring of the reactor and control of external disconnection in case of overheating. Our standard range covers 400V 50Hz up to 300A per phase. Other values are available on request.

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ALUMINUM SCRAPS We can supply you with High quality 99.7% min Aluminum scraps of various types . We will offer you different types of scraps like rod, plate, wire, cable, wheel, shredded, clipping, heavies, die cast, girder, can, tank, mix materials, etc. Please below we offer most grades of Aluminum Scraps such as: Aluminum alloy wheel scrap Aluminum wire scrap Aluminum Extrusion 6063 scrap Aluminum engine block scrap Specification 1.Competitive price 2.Fast Delivery Within 20 days 3.SGS , BV 4.Professional factory

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ALUMINUM SCRAPS We can supply you with High quality 99.7% min Aluminum scraps of various types . We will offer you different types of scraps like rod, plate, wire, cable, wheel, shredded, clipping, heavies, die cast, girder, can, tank, mix materials, etc. Please below we offer most grades of Aluminum Scraps such as: Aluminum alloy wheel scrap Aluminum wire scrap Aluminum Extrusion 6063 scrap Aluminum engine block scrap Specification 1.Competitive price 2.Fast Delivery Within 20 days 3.SGS , BV 4.Professional factory

RAFI Eltec has over 20 years of experience in the special technology chip-on-board. That gives us a profound understanding of processes and quality in the standard technologies and beyond. As a result, we meet your requirements for flexible and reliable implementation of technically sophisticated solutions. We even set new standards. CHIP-ON-BOARD TECHNOLOGIES • Chip-on-board bonding • Chip-on-chip bonding • Chip-on-flex bonding • Flip chip TECHNOLOGIES IN THE CLEAN ROOM • Die bonding • Wire bonding (aluminum wire bonding and gold wire wedge-wedge bonding) • Glob top casting • Optical casting • Application of HF seals

High quality aluminium welding wire S Al 5087 - AlMg4,5MnZr Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 4043(A) - AlSi5(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 5754 - AlMg3 Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 5554 - AlMg2,7Mn(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 4047(A) - AlSi12(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 5183(A) - AlMg4,5Mn0,7(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 5356 - AlMg5Cr(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire SG-AlSi3Mn Diameter MIG wires 1,00 mm - 1,60 mm / 0,039 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB