Results for
Germany
Aluminium wire We manufacture hard drawn and annealed aluminium wire at our site in Rothenburg/Saale. Materials / DIN EN E-aluminium according to EN 60889 Aluminium-magnesium-silicon alloys according to EN 50183 Aluminium content min. 99.5 % Aluminium for cold forming parts
Request for a quoteGermany
The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.
Request for a quoteGermany
By means of a hinge, the edge protector SKD can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.
Request for a quoteGermany
secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size
Request for a quoteGermany
Parts are made to custom design from drawings, from very small quantities to industrial mass application, in a wide range. We work with steel, stainless steel, copper and aluminium wire and can also implement your surface requirements.
Request for a quoteGermany
• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered
Request for a quoteGermany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteGermany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteGermany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteGermany
• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened
Request for a quoteGermany
Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ALUMINUM SCRAPS We can supply you with High quality 99.7% min Aluminum scraps of various types . We will offer you different types of scraps like rod, plate, wire, cable, wheel, shredded, clipping, heavies, die cast, girder, can, tank, mix materials, etc. Please below we offer most grades of Aluminum Scraps such as: Aluminum alloy wheel scrap Aluminum wire scrap Aluminum Extrusion 6063 scrap Aluminum engine block scrap Specification 1.Competitive price 2.Fast Delivery Within 20 days 3.SGS , BV 4.Professional factory
Request for a quoteGermany
Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ALUMINUM SCRAPS We can supply you with High quality 99.7% min Aluminum scraps of various types . We will offer you different types of scraps like rod, plate, wire, cable, wheel, shredded, clipping, heavies, die cast, girder, can, tank, mix materials, etc. Please below we offer most grades of Aluminum Scraps such as: Aluminum alloy wheel scrap Aluminum wire scrap Aluminum Extrusion 6063 scrap Aluminum engine block scrap Specification 1.Competitive price 2.Fast Delivery Within 20 days 3.SGS , BV 4.Professional factory
Request for a quoteGermany
Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ALUMINUM SCRAPS We can supply you with High quality 99.7% min Aluminum scraps of various types . We will offer you different types of scraps like rod, plate, wire, cable, wheel, shredded, clipping, heavies, die cast, girder, can, tank, mix materials, etc. Please below we offer most grades of Aluminum Scraps such as: Aluminum alloy wheel scrap Aluminum wire scrap Aluminum Extrusion 6063 scrap Aluminum engine block scrap Specification 1.Competitive price 2.Fast Delivery Within 20 days 3.SGS , BV 4.Professional factory
Request for a quoteGermany
High quality aluminium welding wire S Al 5087 - AlMg4,5MnZr Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB
Request for a quoteGermany
High quality aluminium welding wire S Al 4043(A) - AlSi5(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB
Request for a quoteGermany
High quality aluminium welding wire S Al 5754 - AlMg3 Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB
Request for a quoteGermany
High quality aluminium welding wire S Al 5554 - AlMg2,7Mn(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
High quality aluminium welding wire S Al 5183(A) - AlMg4,5Mn0,7(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB
Request for a quoteGermany
High quality aluminium welding wire S Al 5356 - AlMg5Cr(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB
Request for a quoteGermany
High quality aluminium welding wire SG-AlSi3Mn Diameter MIG wires 1,00 mm - 1,60 mm / 0,039 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB
Request for a quoteResults for
Aluminium wires - Import exportNumber of results
21 ProductsCompany type