Additives - Import export

FLAME RETARDANT FOR PLASTICS

INTRODUCING NEWOSTAT® INTERNAL AND EXTERNAL ANTISTATS FOR PLASTIC Everybody is familiar with electrostatic discharge. It becomes visible, and especially perceptible, when walking over a nonconductive floor, then touching a door handle and getting “a shock.” Such discharges are not only unpleasant, but in many sectors are even dangerous. Antistatic agents are used to avoid this problem and thus make both the manufacture and the use of plastic products safer. However, antistats can also contribute an additional positive effect. With NEWOSTAT® antistatic agents, the tendency of many plastics to attract dirt can be markedly reduced.

In many plastic systems, such as elastic PVC floor coverings, a wide variety of Incorporated inorganic fillers. However, these inorganic additives do not show any significant tendency to be incorporated into the liquid constituents of a plastisol. Without suitable additives, this is practically impossible. Provides for an optimal distribution of the filler NEWOS for the process step of dispersing innovative and market-proven process aids under the name NEWOTEC.

CONSTAB CON-Xtend 21 is used to produce articles for industrial packaging and food packaging. Improve your barrier packaging with CONSTAB CON-Xtend 21, an innovative solution that allows you to adjust the barrier effect according to your specific requirements. Using CONSTAB CON-Xtend 21 saves EVOH and therefore costs, increases productivity and ensures recyclability without compromising on oxygen barrier.

INTRODUCING NEWOLAN® NEWOLAN®- rheology additives – Products that make coating easier Many important plastics accrue during manufacture as fine particulate powders. It is often difficult to produce sheeting from them on a supporting material for example for floor coverings. Therefore, before mechanical shaping as a surface can occur, these powders must first be converted into a flowable or spreadable paste with a fluid medium. Such pastes are called plastisols. In the process, rheology additives optimally adapt the flow behavior (rheology) of the PVC pastes to the process parameters during sheeting manufacture. Under the brand name NEWOLAN®, NEWOS offers innovative and market-tested rheology additives that can be optimized to your requirements at any time.

With CONSTAB CON-Batch 30X, films can be produced denser and firmer - the layer thickness, on the other hand, can be reduced by approx. 25 %, the heating power by approx. 20 %. CONSTAB CON-Batch 30X masterbatch is used, for example, in the production of thermoformable sheets and enables the overall thickness of the sheet to be reduced by up to 30% while maintaining its mechanical integrity. It improves the mechanical and optical properties of the final product. In addition, the masterbatch serves as a processing aid in extrusion applications, enabling higher production speeds and a wider processing window, while reducing energy consumption. CON-Batch 30X can be easily used in monofilms and thus recycled. CON-Batch 30X can be supplied with a certificate confirming CO₂-neutrality.

In addition to common applications such as shrink BOPP tobacco films, CONSTAB Modifier masterbatches can also be used for other applications. They provide a whole range of benefits - from labels to transparent food packaging. For example, they contribute to improved mechanical and optical properties, create an increased gas barrier or better processability.

CONSTAB offers a wide range of masterbatches with which you can provide your BOPP films with the required or desired properties. There is a wide range of properties with which BOPP films can be provided for individual use. At CONSTAB you will find BOPP masterbatches for co-extruded films, matt films, for metallizable matt films, cigarette film and metallizable films, among others.

CONSTAB offers you a wide range of masterbatches and compounds for polyethylene films, such as: — Bubble Film — Electronic packaging film — Injection molding and extrusion blow molding — Foamed films — Food packaging films — Greenhouse films — Film packaging for industry and food — Industrial films — Industrial packaging films Our masterbatches and compounds provide your products with the properties they should later have.

Ecocell® is a patented, endothermic chemical foaming agent (CFA) masterbatch that helps improve multiple plastic requirements simultaneously. Our masterbatches are designed to optimize the properties of end products for specific applications. The use of Ecocell® significantly reduces material consumption. In addition, mechanical properties of the products can be optimized. Furthermore, cooling times are shortened, performance is increased and energy costs are reduced.

The formulation was specially developed for use in polyolefins (PE/PP). It is applicable for virgin grades as well as for recycled and regrinded materials. CEVO® process B-3680 can be used in unfilled, mineral-filled and glass fiber reinforced polyolefin formulations. Its application leads to a lowering of the melt viscosity and to an improved distribution of fillers, reinforcing materials and additives (stabilisers, pigments, ...). The components produced show very high surface qualities combined with a high gloss.

Effective lubricant and dispersing agent in transparent engineering plastics such as PET/PBT and in reinforced polypropylene (PP); lubricant, release agent and dispersing agent in polystyrene (PS), polyoxymethylene (POM) and nylon (PA, PA6, PA66); external lubricant for rigid PVC profiles; lubricant, release agent, slip agent and anti-fog agent in thermoplastic polyurethane (TPU), lubricant and anti-blocking agent in polymethylmethacrylate (PMMA).

By the addition to the most different formulations injected parts can be faster ejected. The use in mineral filled, glass fibre reinforced and/or pigmented compounds improves the homogeneity of the filler and/or pigment distribution, reduces damages by friction peaks and leads to an improved surface quality. We recommend to add amounts of 0.3 – 0.5 %.

By the addition to the formulations the degradation of polymer during extrusion process will be reduced and the flow characteristic will be enhanced. The package improves the homogeneity of filler distribution and leads to an increased surface quality. Excellent for use in recycling PA. We recommend to add amounts of 0.5 – 0.8 %.

chemical blowing agents, microsphere masterbatches, lubricants, demoulding aids, UV stabilisation and more

ALWA acryl sealer is used to seal porous surfaces, such as wood, gypsum and rigid foams (not suitable for polystyrene foam). The primer dries in the air and forms a strong film. Apply a thin layer of ALWA acryl sealer evenly with a brush. If 3 % hardener powder is added, the curing process can be reduced to approx. 30 min.

ALWA plasticine is used to repair master patterns, round off sharp edges, seal casting boxes and build a parting plane.

ALWA repair filler (art. no. 5100001) is used in order to repair casting resin moulds. The filler is mixed with 1 – 3 % hardener powder.

The solvent combination contains methyl methacrylate (MMA) and is used for diluting and cleaning.

Dr. Paul Lohmann® offers Sodium Succinate 6-hydrate as powder and solution in food/pharma and chem. pure grade. For biopharmaceutical applications, it is used as a pH buffer in cell culture media. For food applications, it is used as a flavoring agent. For industrial applications, it is used as a stabilizer for electroplating baths, as a nucleating polymer additive and as a crystallization modifier in gypsum production. CAS 6106-21-4 EINECS 205-778-7 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Magnesium Citrate Malate as fine powder for food supplements. The free-flowing and non-hygroscopic powder is clear soluble and stable in solution. For food applications, it is used for magnesium fortification. CAS 1259381-40-2 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

The importance of additives. Behind the Color Masterbatch, additives are often regarded as “colorless” companion. However, their significance is far more substantial. Additives can have a decisive impact on product manufacturing and product life cycles. Optimise manufacturing processes. In the manufacturing process, additives are important. As required, cavities can be filled more easily, for example, in the injection molding process, parts can be removed from the molds or deposits can be avoided. The profitability of the production process can also be decisively improved: additives can minimize cycle times or reduce processing temperatures. We would like to inform you about the scope for optimising your production processes. Add more values. In addition, additives protect thermoplasts and generate additional properties. Thus antioxidants, both during the thermal forming process and in the application, enable the resistance of the polymer against destructive temperature

With our CNC-fiber laying technlogy we can manufacture carbon preforms up to 2500x2000mm. That way producing composite parts in large dimensions will not be a problem. The usage of different fibers (carbon, glass and aramid) is possible too. Please contact us.

Dr. Paul Lohmann® offers Zinc Bisglycinates as powder in food grade and for food supplements. Bislgycinates are fully reacted chelates. For food applications, it is used for zinc fortification. CAS 14281-83-5 EINECS 238-173-1 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Magnesium Bisglycinate as powder in food grade as well as for food supplements. Bisglycinates are fully reacted chelates. For food applications, it is used for magnesium fortification. CAS 14783-68-7 EINECS 238-852-2 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Zinc Malate as fine powder for food supplements. For food applications, it is used for zinc fortification. CAS 2847-05-4 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Sodium Malate as powder, fine powder in food grade. For food applications, it is used as acid regulator. CAS 676-46-0 \ 64887-74-7 \ 3105-51-9 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.