Liners - Import export

Application The BDW is designed to reface the seating provided in the engine block for receiving the flange of the cylinder liner. Capacity Refacing diameter range 90-180mm Features Centering in the cylinder bore is automatically effected by simply turning the centering spindle. The studs at the engine block are used for rigidly clamping the BDW to the engine block. The seating is refaced to the preset depth by the simultaneous application of both a rotary and a transverse feed motion to the single point cutting tool. While the single point carbide cutting is rotated around the seating, a feed gear mechanism ensures a transverse feed motion. An adjustable depht stop makes sure that all seatings are cut to the same depth.

Application The HMB Honing Rigs are designed for honing cylinder liners removed from the engine block with the corresponding mobile Hunger PHM Honing Machines. - Honing Rig Type HMB 340 is tailored to the Honing Machine Type HBM 340. - Honing Rig Type HMB 640 is tailored to the Honing Machine Type HBM 640. Features Rigid base structure including upright supporting tubes for mounting the mobile PHM Honing Machine. The liner to be honed is placed on top of a honing liquid reservoir which is slideably mounted on the base structure. The reservoir can be drawn out for ease of loading and unloading of the cylinder liner by means of a crane. An electric pump is provided to supply honing liquid to a spray nozzle. The spray nozzle is mounted on a magnetic base which can be attached to the frame tube to direct the honing liquid to the area to be honed.

Application The Hunger SHM is designed for precision honing of cylinder liners with bore diameter from 150 to 640 mm. Features • Air powered honing. Powerfull air motor for rotary motion of honing head, air hoist for stroke motion and, as an unique feature, air cylinders for stone feeding. • Superior control. Manual buttons are provided for fine adjusting setting of honing head RPM, stroking rate and stone feeding pressure. • Pressure gauges for displaying the selected setting of honing head RPM, stroking rate and stone feeding pressure. • Two-hand control actuation to protect the operator according to the stringent EC safety regulations. • Automated stroking between adjustable end stops. • Drawer-type honing liquid reservoir acting as support for the cylinder liner and mounted on casters for ease of loading and unloading the cylinder liner.

Application With the mobile honing machine PHM, the cylinder liners of large diesel engines can be honed in the crankcase when installed. The stationary honing machine base HMB is required for honing removed cylinder liners. An optional comfort control panel including the regulator valves and the manometer gauges can be provided at the lower end of the preassembled drive unit within easy reach of the operator while standing at cylinder liner level. A single central air treatment unit with air filter and lubricator is also provided for trouble free operation. Automatic stroking is available as a option. The stroking lenght can be adjusted by means of end stops.

Self-adhesive pre-cutted foam liners that are placed inside the screw cap. The adhesive is activated by screwing tha cap on the jar with enough pressure. This way the insert provides a very high adhesion on glass and plastic containers. No sealing machine needed. Delivered with standard print: SEALED for YOUR PROTECTION Primarily suitable for dry products.

DryLin® R - Installation videos System selection & service life calculation DryLin® R - Introduction and technical information Special info on DryLin® R linear plain bearing L1 series drylin® igus® test method Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts Linear round guide DryLin® R linear plain bearings are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees ruggedness even in extreme environments. DryLin® R - Installation videos Advantages: 100 % lubricant-free Dimensionally interchangeable with (recirculating) ball bearings Large variety of choice in housing shapes Shafts, shaft blocks and accessories available from stock 8 different shaft materials Replaceable liners VA stainless steel housing available When not to use it? When little installation space is available drylin® N drylin® W When twist-protection is required for single-axis systems DryLin® T DryLin® N Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts

SAMSYS offers Spindle Liner for draw tube diameters from 38mm to 100mm. The length of the reduction tube depends on the length of the draw tube, as well as the clamping device and the type of clamping cylinder. The reduction tube consists of a precision steel tube as support tube (1). In order to ensure optimum guidance, the rear (2) and the front (3) guide are adapted to the lathe. Mounting as well as dismounting can be done in a very short time with a few simple steps, as the reduction tube is only attached to the clamping cylinder with two screws. The POM bushings (4) can be flexibly adapted to the material diameter. Since you do not need to store a reduction tube for every diameter, you save valuable storage space. A Water pan extension (5) is also available as an option for safe covering and splash protection.

During the production of inner liner, the thickness profile of inner liner material is measured immediately after the calender using systems of the thicknessCONTROL TIP series. Accurate precision of the non-contact optical system ensures high quality and security of the product produced. Sensors belonging to the thicknessCONTROL RTP series can also be applied for this application.

One-piece induction liners reliably close containers of any make or type using an induction sealing device. The unique features of these liners are: leak-proof, product freshness, tamper-proof and economical. A special quality for induction sealing of glass containers is availbale. Advantages One-piece liners Peelable Special qualities for sealing plastic and glass containers Leak protection Tamper evidence Protection against external influences

Are your goods in good shape? Flat products such as picture frames, books or ceramics can be better protected against transport damage by flexible intermediate layers.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

Application 2 synchronous propulsion motors per ship for cruise liners.

Application 4+2 synchronous main generators per ship for cruise liners.

Self-adhesive pre-cutted foam liners that are placed inside the screw cap. The adhesive is activated by screwing tha cap on the jar with enough pressure. This way the insert provides a very high adhesion on glass and plastic containers. No sealing machine needed. Delivered with standard print: SEALED for YOUR PROTECTION Primarily suitable for dry products.

One-piece induction liners reliably close containers of any make or type using an induction sealing device. The unique features of these liners are: leak-proof, product freshness, tamper-proof and economical. A special quality for induction sealing of glass containers is availbale. Advantages One-piece liners Peelable Special qualities for sealing plastic and glass containers Leak protection Tamper evidence Protection against external influences Delivery MOQ: 10,000 pcs per size Different shapes, sizes, material specifications and designs with or without pull tabs Customer specific design possible using digital print (also small batches) application areas Pharmaceutical industry Food industry Cosmetics industry

The high-quality, super-calendered glassine papers used by HERMA are ideally suited for labelling machines with optical or mechanical scanning. Their adhesive bond properties ensure excellent processing on all standard flat bed and rotary die cutting machines.

Print shipping labels without backing material, avoid thousands of tons of waste material and, at the same time, reduce your carbon footprint – this is all possible thanks to our sustainable and innovative PA4 / PA6 InNo-Liner Print & Apply System. The material is printed, cut, activated and applied with the labeling machine and the combined cutting component, micro-atomization component and linear tamp unit. Thanks to the HERMA InNo-Liner and the patented, multi-layer pressure-sensitive adhesive, thousands of tons of backing paper or backing film and the cost of their disposal can be saved every year. The labels can be pre-printed in color using the conventional printing process. The labeling machine can be equipped with an optional thermal transfer printer or thermal direct printer for printing the variable data.

Protector Zero Hood – Don’t get caught cold The Zero Hoods are excellent fitting safety helmet winter liners that maintain the body’s heat and alertness during cold weather conditions. Manufactured from waterproof outer fabrics and warm high quality Thinsulate™ layer, they provide maximum protection from the elements without compromising the fit or stability of the safety helmet. Product highlights of Protector Zero Hood Maximum warmth, concentration and safety during cold weather conditions Comfortable 200 g fleece liners Available in standard or high visibility colours Lightweight, highly effective, Thinsulate™ protection Optimum shape retains warmth, fits a wide range of head range size and does not compromise the helmet’s fit Foldable neck cover for optional ventilation or periods of rest Velcro strips through the headgear design allow secure attachment to most industrial safety helmets

“I expect my adhesive to bond perfectly, just not to the outer packaging!” A customer request that is more than justified and one which we have taken to heart. We can thus now offer tailored linings for containers made from tin, plastic or any other material that optimally meet customer requirements. We are continuously working on ways in which to improve our products, with skilled and experienced employees happy to explore innovative liner solutions. Because the chemistry must be right, between the liner and the filling material, as well as the company and our customers. This is why we strive to always take an eco-friendly approach, focusing on an environmentally sound and thus separate disposal of packaging – from the order through to development and, ultimately, the satisfied customer: perfection from start to finish.

Our liners are not only practical, they can also be aseptic.The liner assembles itself thanks to a unique design and folding system. It only takes one person to fill it – from the top or the bottom. There are thus considerable savings to be made when filling, while maintaining optimum utilisation. The special design of the liner adapts to the container like a second skin and protects the bulk material. There are no readjustments required during the filling process. Our customers can rest assured we have everything under control: we carry out regular pressure and sight tests, sealed seam and strength tests, as well as simulated transport tests, in order to maintain our high quality standards. And another thing: in order to support the shelf life of your goods, our liners are sterilised with gamma rays.

Your bulk cargo is fully protected and safely stored in our liners. We not only guarantee this with our ongoing quality checks but also by using the most varied of structures and materials which, depending on requirements, ensure your products are optimally handled: from the inlets/outlets of varying sizes to the practical centring discs that make insertion into the outer packaging easier, to the conical bottom that lightens the load on sealed seams and guarantees optimum drainage of residual material. We also have plenty to offer when it comes to materials: in addition to our popular PE liners or high-quality aluminium composite film, we also offer specially tailored liners for octabins, boxes or FIBCs as par for the course. What do we recommend? You can rely on the quality of our aluminium composite film to protect top-quality, hygroscopic products against dampness, water vapour, UV radiation, oxygen, as well as odour transmission. Your product will thank you for it.